| 碳化硼对电弧喷涂涂层性能的影响 |
| |
| 引用本文： | 魏琪,高明,李辉,卢兰志.碳化硼对电弧喷涂涂层性能的影响[J].焊接学报,2010,31(11):65-68. |
| |
| 作者姓名： | 魏琪 高明 李辉 卢兰志 |
| |
| 作者单位： | 北京工业大学,材料科学与工程学院,北京,100124 |
| |
| 基金项目： | 北京市教委科技发展项目 |
| |
| 摘 要： | 将碳化硼(B4C)陶瓷粉末和其它合金元素与304L不锈钢带轧制成粉芯丝材,采用电弧喷涂技术制备金属陶瓷复合涂层.研究了B4C在电弧喷涂中的应用.利用XRD,SEM对涂层的形貌、相组成和磨损表面进行了分析.利用自行设计的高温磨粒磨损装置和高温冲蚀设备分别评价了B4C对涂层耐高温磨粒磨损性能和耐高温冲蚀性能的影响.结果表明,粉芯丝材喷涂工艺良好,B4C陶瓷与粉芯中其它组分反应,可以形成含Fe3B,CrB,FexN i23-xB6,Fe23(C,B)6,(Cr,Fe)7C3和Fe3C等硬质相的复合涂层,大幅度提高了涂层的硬度和耐磨耐冲蚀性能.
|
| 关 键 词： | 碳化硼 磨损 电弧喷涂 粉芯丝材 |
| 收稿时间： | 2009/7/20 0:00:00 |
Effect of boron carbide on properties of arc spraying coatings |
| |
| WEI Qi,GAO Ming,LI Hui and LU Lanzhi.Effect of boron carbide on properties of arc spraying coatings[J].Transactions of The China Welding Institution,2010,31(11):65-68. |
| |
| Authors: | WEI Qi GAO Ming LI Hui and LU Lanzhi |
| |
| Affiliation: | College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China,College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China,College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China and College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China |
| |
| Abstract: | A cored wire containing the boron carbide ceramic powder and other alloying elements powder was fabricated with 304L stainless steel sheath and the metal ceramic composite coating was deposited by arc spraying.The feasibility of boron carbide in the application of arc spraying was studied.The microstructure,phase compositions and worn surface morphologies of the coatings were analyzed by means of scanning electron microscopy and X-ray diffraction.High temperature abrasive wear performance and erosion performance were evaluated by high-temperature abrasive wear tester designed by authors and high temperature erosion devices,respectively.The results show that the cored wires have good process ability for arc spraying.The composite coatings contains Fe3B,CrB,FexNi23-xB6,Fe23(C,B)6,(Cr,Fe)7C3 and Fe3C hard phases due to the in-situ synthesis of B4C ceramic particle with other alloying elements powder,which result in a significant increase in the hardness,wear-resistantance and erosion-resistantance of the coating. |
| |
| Keywords: | boron carbide wear arc spraying cored wire |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
