| 微小轴承表面缺陷检测中的自动分拣系统设计 |
| |
| 引用本文： | 张振祥,袁云龙,陈廉清.微小轴承表面缺陷检测中的自动分拣系统设计[J].机电工程,2010,27(5):35-37. |
| |
| 作者姓名： | 张振祥 袁云龙 陈廉清 |
| |
| 作者单位： | 1. 宁波工程学院,实验室与设备管理处,浙江,宁波,315211
2. 宁波工程学院机械工程学院,浙江,宁波,315211 |
| |
| 基金项目： | 浙江省科技攻关计划项目，宁波市自然科学基金 |
| |
| 摘 要： | 针对微小轴承人工目测效率低、漏检率高等问题,结合微小轴承表面缺陷计算机视觉检测系统控制的总体要求,对分拣系统的组成、可编程控制器（PLC）系统选择、I/O点数确定、PLC与上位机通信进行了研究,设计了基于PLC的软、硬件系统,分拣机构可实现微小轴承的自动输送、翻转及剔除等各种运动。多次实验结果均表明,该分拣系统达到了预期的功能要求,稳定性好,可以应用于实际生产中。
|
| 关 键 词： | 可编程控制器 轴承 自动分拣 |
Development of automatic inspecting system for the defect on micro bearing surface |
| |
| ZHANG Zhen-xiang,YUAN Yun-long,CHEN Lian-qing.Development of automatic inspecting system for the defect on micro bearing surface[J].Mechanical & Electrical Engineering Magazine,2010,27(5):35-37. |
| |
| Authors: | ZHANG Zhen-xiang YUAN Yun-long CHEN Lian-qing |
| |
| Affiliation: | 1.Division of Laboratory ＆ Equipment Management,Ningbo University of Technology,Ningbo 315211,China;2.College of Mechanical Engineering,Ningbo University of Technology,Ningbo 315211,China) |
| |
| Abstract: | It has a low efficiency to find the defect on micro bearing surface by using manual method.Aiming at this problem,the inspecting setup,choice of programmable logic controller（PLC） system,I/O point quantity scheme,and the correspondence between PLC and upper computer were studied based on the whole requirement of computer vision detection system for micro bearing defect.Then an automatic inspecting system was developed,in which the sorting equipment controlled by a PLC can realize many actions,including automatic feed,turn and elimination.Several experiments were carried out to validate the effectiveness of the proposed inspecting system.The results show that it realizes the expected functions and has a high stability,and the system can be used for actual production. |
| |
| Keywords: | programmable logic controller（PLC） bearing automatic sorting |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
