| 采用虚拟样机技术的某驱动桥壳的动载荷获取研究 |
| |
| 引用本文： | 陈雪辉,朱银锋,袁根福,黄磊,陈从升.采用虚拟样机技术的某驱动桥壳的动载荷获取研究[J].现代制造工程,2012(1):56-59. |
| |
| 作者姓名： | 陈雪辉 朱银锋 袁根福 黄磊 陈从升 |
| |
| 作者单位： | 安徽建筑工业学院机械与电气工程学院 |
| |
| 基金项目： | 安徽省高等学校省级优秀青年人才基金项目(2009SQRZ103);安徽省教育厅自然科学重点项目(KJ2011A062);安徽建筑工业学院博士基金项目(200812-12) |
| |
| 摘 要： | 根据驱动车桥具体的实际使用情况,应用多体动力学(MBD)仿真软件MotionView建立相关悬架总成的力学仿真模型,对车桥工作的三种极限工况进行仿真分析计算,输出零件运动关系和相互作用力,得到驱动桥壳在典型工况下相关位置的最大动载荷,为下一步进行有限元计算和结构优化设计提供参数依据。
|
| 关 键 词： | 虚拟样机技术 驱动桥壳 动载荷 仿真分析 |
The dynamic load acquisition research of a drive axle housing based on virtual prototype technology |
| |
| Chen Xuehui,Zhu Yinfeng,Yuan Genfu,Huang Lei,Chen Congsheng.The dynamic load acquisition research of a drive axle housing based on virtual prototype technology[J].Modern Manufacturing Engineering,2012(1):56-59. |
| |
| Authors: | Chen Xuehui Zhu Yinfeng Yuan Genfu Huang Lei Chen Congsheng |
| |
| Affiliation: | (College of Mechanical and Electrical Engineering,Anhui University of Architecture,Hefei 230601,China) |
| |
| Abstract: | According to the actual use of the drive axle,multi-body dynamic model of the related suspension system was established by MotionView.Under three limiting operational conditions,virtual simulation analysis of the drive axle was performed.Then,the relationship and the interaction force between the movement parts were achieved.At the same time,the maximum dynamic load of drive axle housing under typical condition was obtained.The analysis results provide the related parameters for the next step finite element calculation and design of structural optimization. |
| |
| Keywords: | virtual prototype technology drive axle housing dynamic load simulation analysis |
| 本文献已被 CNKI 等数据库收录！ |
|
