| 单片机控制的水下焊接脉动送丝机的研制 |
| |
| 引用本文： | 邓方雄,钟继光,张建春,石永华. 单片机控制的水下焊接脉动送丝机的研制[J]. 焊管, 2006, 29(5): 45-47 |
| |
| 作者姓名： | 邓方雄 钟继光 张建春 石永华 |
| |
| 作者单位： | 华南理工大学,机械工程学院,广州,510640;华南理工大学,机械工程学院,广州,510640;华南理工大学,机械工程学院,广州,510640;华南理工大学,机械工程学院,广州,510640 |
| |
| 摘 要： | 根据水下焊接的机理,研制出一种由单片机控制的脉动送丝机构与水下脉冲焊接电源相配合的送丝机.在水下焊接过程中,脉冲电源输出高电平时,停止送丝,电弧稳定燃烧并形成熔滴;脉冲电源输出低电平时,开始送丝,熔滴依靠送丝动量向熔池过渡.该送丝机构由单片机实现数字化控制,控制灵活,可以有效地控制水下焊接时的熔滴过渡,提高焊接电弧稳定性,减少飞溅,改善焊缝成型.
|
| 关 键 词： | 脉动送丝 水下焊接逆变电源 单片机 |
| 文章编号： | 1001-3938（2006）05-0045-03 |
| 收稿时间： | 2006-04-07 |
| 修稿时间： | 2006-04-07 |
Development of Underwater Welding Pulsed Wire Feeder Controlled by MCU |
| |
| DENG Fang-xiong,ZHONG Ji-guang,ZHANG Jian-chun,SHI Yong-hua. Development of Underwater Welding Pulsed Wire Feeder Controlled by MCU[J]. Welded Pipe and Tube, 2006, 29(5): 45-47 |
| |
| Authors: | DENG Fang-xiong ZHONG Ji-guang ZHANG Jian-chun SHI Yong-hua |
| |
| Abstract: | According to the mechanism of underwater welding,develop a pulsed-wire feeding system controlled by MCU and working with underwater welding power.During the welding process,when underwater welding power outputs high level,the system stops feeding wires and wires burn upwards with forming molten droplets.Contrarily,when underwater welding power outputs low level,it begins to feed wires and molten droplets transfer to welding pool depending on the feeding momentum.This system realizes digital control with the help of MCU.It controls freely and has an effective control on droplet transfer in the process of underwater welding.This system improves the welding arc stability and welding forming with fewer spatters. |
| |
| Keywords: | pulsed wire feeding underwater welding inverter power MCU |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
