| 气井压裂裂缝参数优化设计 |
| |
| 引用本文： | 李林地,张士诚,马新仿,韩秀玲.气井压裂裂缝参数优化设计[J].油气地质与采收率,2008,15(5):105-107. |
| |
| 作者姓名： | 李林地 张士诚 马新仿 韩秀玲 |
| |
| 作者单位： | 中国石油大学(北京)石油工程教育部重点实验室,北京,102249 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 低渗透气藏渗透率低，渗流阻力大，往往须通过压裂改造才能获得工业气流，而合理的裂缝参数是水力压裂取得良好效果的关键。从气体在低渗透气藏中的渗流机理研究入手，考虑了气体非达西渗流对产量的影响，建立了气井压裂产量预测模型，在裂缝导流能力的计算中考虑了裂缝的失效性。对现场实例进行了模拟计算，以压裂改造后的采出程度为目标进行了裂缝参数优化设计，并分析了渗透率各向异性对产气量的影响。研究结果表明，渗透率各向异性越强，产气量增加幅度越小；优化的裂缝导流能力为30～40μm^2·cm，缝长比为0．25—0．3。
|
| 关 键 词： | 气井 压裂 各向异性 裂缝参数优化 缝长比 导流能力 |
| 修稿时间： | 2008/8/14 0:00:00 |
Optimization design of gas well fracture parameters |
| |
| Li Lindi,Zhang Shicheng,Ma Xinfang et al.Key Laboratory of Petroleum Engineering,Ministry of Education,China University of Petroleum,Beijing Cit-y,China.Optimization design of gas well fracture parameters[J].Petroleum Geology and Recovery Efficiency,2008,15(5):105-107. |
| |
| Authors: | Li Lindi Zhang Shicheng Ma Xinfang Key Laboratory of Petroleum Engineering Ministry of Education China University of Petroleum Beijing Cit-y China |
| |
| Affiliation: | Li Lindi,Zhang Shicheng,Ma Xinfang et al.Key Laboratory of Petroleum Engineering,Ministry of Education,China University of Petroleum(Beijing),Beijing Cit-y,102249,China |
| |
| Abstract: | Low permeability gas reservoirs have high flow resistance and hydraulic fracturing is usually required in order to gain commercial gas flow.Appropriate fracture parameters are favor of hydraulic fracturing.A production model for predicting operation of gas well was established depending on the gas percolation mechanism and the influence of gas non-Darcy flow on production.Meanwhile the invalidation of fractures in the conductivity calculation was taken into consideration.By means of the simulation calculati... |
| |
| Keywords: | gas well fracturing anisotropy fracture parameter optimization the ration of fracture length to well spacing fracture conductivity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《油气地质与采收率》浏览原始摘要信息 |
|
点击此处可从《油气地质与采收率》下载全文 |
