首页 | 官方网站   微博 | 高级检索  
     

304不锈钢弯头开裂失效分析
引用本文:张瑞锋,刘霞.304不锈钢弯头开裂失效分析[J].理化检验(物理分册),2019(5):351-355.
作者姓名:张瑞锋  刘霞
作者单位:内蒙古北方重工业集团有限公司
摘    要:某公司304不锈钢弯头在使用5a(年)后出现周向裂纹而失效,通过宏观观察、金相检验、扫描电镜分析、化学成分分析、力学性能试验和晶间腐蚀试验等方法,对弯头失效原因进行了分析。结果表明:该304不锈钢弯头裂纹为应力腐蚀形成的沿晶裂纹。弯头暴露在空气中并附着有长期因雨水、盐分产生的弱腐蚀介质,再加上管道输送的氧气对管壁外表面产生的拉应力以及弯头材料本身抗晶间腐蚀性差,最终弯头发生开裂失效。

关 键 词:304不锈钢  弯头  开裂  应力腐蚀  沿晶裂纹

Failure Analysis on Cracking of 304 Stainless Steel Elbow
ZHANG Ruifeng,LIU Xia.Failure Analysis on Cracking of 304 Stainless Steel Elbow[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2019(5):351-355.
Authors:ZHANG Ruifeng  LIU Xia
Affiliation:(Inner Mongolia Northern Heavy Industry Group Co., Ltd., Baotou 014030, China)
Abstract:The 304 stainless steel elbow of a company failed due to circumferential cracks after 5 years of service.The failure causes of the elbow cracks were analyzed by means of macroscopic observation,metallographic examination,scanning electron microscopic analysis,chemical composition analysis,mechanical properties test and intergranular corrosion test.The results show that the cracks of 304 stainless steel elbow were intergranular cracks formed by stress corrosion.The elbow was exposed to air and adhered to the weak corrosion medium produced by rain water and salt for a long time.In addition,the tensile stress on the outer surface of pipe wall caused by oxygen conveyed by pipe and poor intergranular corrosion resistance of the elbow material itself.Finally,the elbow cracked and failed.
Keywords:304 stainless steel  elbow  cracking  stress corrosion  intergranular crack
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号