| 激光和等离子处理对复合材料表面涂层附着力的影响研究 |
| |
| 引用本文： | 汤朋,汪洋,曹东萍,高立新,周甘华,朱浩,刘秀生.激光和等离子处理对复合材料表面涂层附着力的影响研究[J].涂料工业,2019,49(12):27-35. |
| |
| 作者姓名： | 汤朋 汪洋 曹东萍 高立新 周甘华 朱浩 刘秀生 |
| |
| 作者单位： | 1.武汉材料保护研究所有限公司，武汉430030；
2.特种表面保护材料及应用技术国家重点实验室，武汉 430030；
3.奇瑞新能源汽车技术有限公司，安徽芜湖 241000 |
| |
| 基金项目： | 汽车复合材料车身模压成形技术与装备资助 |
| |
| 摘 要： | 为了提高环氧涂料在纤维增强聚丙烯复合材料上的附着力，采用激光和等离子体表面前处理方法，应用超景深显微镜、粗糙度测定仪、接触角测试仪以及附着力测试仪，研究了激光和等离子体表面处理对纤维增强聚丙烯复合材料表面形貌、表面粗糙度和表面水接触角的影响，并且探究了这 2种表面处理方式对环氧涂层在复合材料上附着力的影响。结果表明： 2种处理方式均可明显提高环氧涂层在基材上的附着力，附着力均可由不到 1 MPa提高至 8 MPa以上。
|
| 关 键 词： | 激光处理 等离子体处理 复合材料 表面粗糙度 表面形貌 接触角 附着力 环氧涂料 |
| 收稿时间： | 2019-06-12 |
Study on the Effect of Laser and Plasma Treatment on the Adhesion of Composite Surface Coating |
| |
| Tang Peng,Wang Yang,Cao Dongping,Gao Lixin,Zhou Ganhua,Zhu Hao,Liu Xiusheng.Study on the Effect of Laser and Plasma Treatment on the Adhesion of Composite Surface Coating[J].Paint & Coatings Industry,2019,49(12):27-35. |
| |
| Authors: | Tang Peng Wang Yang Cao Dongping Gao Lixin Zhou Ganhua Zhu Hao Liu Xiusheng |
| |
| Affiliation: | 1. Wuhan Research Institute of Materials Protection Co. ,Ltd.， Wuhan，Hubei 430030，China；
2. State Key Laboratory of Special Surface Protection Materials and Application Technology，Wuhan，Hubei 430030，China；
3. Chery New Energy Automotive Technology Co.， Ltd.， Wuhu，Anhui 241000，China |
| |
| Abstract: | In order to improve the adhesion of epoxy coatings on fiber reinforced polypropylene composite material，laser and plasma surface treatment methods were used. The effects of laser and plasma surface treatment on surface morphology，surface roughness and contact angle of fiber reinforced polypropylene composite were studied in detail with hyperfield microscope，roughness tester，contact angle tester and adhesion tester . The effects of these two surface treatments on the adhesion of epoxy coatings on composite was also investigated. The results showed that the adhesion of epoxy coatings on the substrates could be significantly improved by both treatments，from less than 1 MPa to higher than 8 MPa. |
| |
| Keywords: | laser treatment plasma treatment composite surface roughness surface morphology contact angle adhesion epoxy coatings |
|
| 点击此处可从《涂料工业》浏览原始摘要信息 |
|
点击此处可从《涂料工业》下载全文 |
