| 激光固溶17-4PH的机理与性能研究 |
| |
| 引用本文： | 叶诗豪,姚建华,胡晓冬,孔凡志,苗建民.激光固溶17-4PH的机理与性能研究[J].动力工程,2011,31(5). |
| |
| 作者姓名： | 叶诗豪 姚建华 胡晓冬 孔凡志 苗建民 |
| |
| 作者单位： | 浙江工业大学特种装备制造与先进加工技术教育部浙江省重点实验室,杭州310014;浙江工业大学激光加工技术工程研究中心,杭州310014 |
| |
| 基金项目： | 国家自然科学基金资助项目(50971117) |
| |
| 摘 要： | 采用扫描电子显微镜(SEM)、显微硬度仪和能量色散谱仪(EDS)分别对经激光固溶处理后的17-4PH材料强化层的显微组织、显微硬度及元素含量进行了分析.结果表明:激光固溶时效后,17-4PH材料的表层平均显微硬度比基体提高了约40%,接近420 HV0.2;表层存在高密度的位错马氏体组织,且马氏体组织中含有Cr、Ni及Cu等合金元素;激光固溶层的耐磨损性能及抗气蚀性能都有一定程度的提高.根据阿伦尼乌斯定律以及菲克第二定律分析了激光固溶的机理,证明:Cu在激光作用下可以在短时间内完全溶入奥氏体,完成固溶过程.
|
| 关 键 词： | 激光技术 激光固溶 17-4PH 显微结构 抗磨损性能 抗气蚀性能 |
Mechanism of Laser Solid Solution for 17-4PH and Properties of the Treated Material |
| |
| YE Shi-hao
,
YAO Jian-hua
,
HU Xiao-dong
,
KONG Fan-zhi
,
MIAO Jian-min.Mechanism of Laser Solid Solution for 17-4PH and Properties of the Treated Material[J].Power Engineering,2011,31(5). |
| |
| Authors: | YE Shi-hao YAO Jian-hua HU Xiao-dong KONG Fan-zhi MIAO Jian-min |
| |
| Affiliation: | YE Shi-hao1,2,YAO Jian-hua1,HU Xiao-dong1,KONG Fan-zhi1,MIAO Jian-min1,2(1.Key Laboratory of Special Purpose Equipment and Advanced Processing Technology,Ministry of Education & Zhejiang Province,Zhejiang University of Technology,Hangzhou 310014,China,2.Research Center of Laser Processing Technology and Engineering,China) |
| |
| Abstract: | Microstructure,microhardness and element content of the strengthened layer of material 17-4PH treated by laser solid solution were analyzed by scanning electronic microscope(SEM),microhardness tester and energy disperse spectroscopy(EDS) respectively.Results show that after laser solid solution and aging treatment,average surface microhardness of the treated material,compared with the substrate,has been improved by about 40%,approaching to 420 HV0.2;dense dislocated martensite can be found in the surface la... |
| |
| Keywords: | laser technique laser solid solution 17-4PH microstructure wear resistance anti-cavitation property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
