Computer-assisted choice of discrete spacers for anionic isotachophoresis separations

In isotachophoresis (ITP), the sample constituents migrate, depending on their concentrations in the loaded sample, either in fully developed zones or in the boundary layers between the zones of constituents of the corresponding effective mobilities. The latter (spike) migration mode is analytically beneficial in selective detections of trace analytes, especially, when appropriately chosen discrete spacers minimize detection interferences due to matrix constituents. To facilitate a search for suitable mixtures of discrete spacers, a two-step calculation procedure was developed in this work. Using a pool of discrete spacers consisting of 42 anionic and zwitterionic constituents, this procedure was shown effective in the anionic ITP separations performed at pH = 6.5-10.0. Besides the predictions of the migration orders, it was helpful in identifying the spacing constituents that could cause resolution problems due to an uncertainty with which pH of the leading electrolyte solution is known. The ionic mobility and pKa data, taken for the spacing constituents from the literature and the ones obtained from the ITP experiments carried out in this work, were used in the calculations performed in a context with the choice of spacers. Although the data obtained from the ITP experiments provided better results, small uncertainties with which they were acquired (attributable to fluctuations in the experimental conditions) set practical limits in the calculation based choice of multi-component mixtures of the spacing constituents.