首页 | 官方网站   微博 | 高级检索  
     

车用发动机油气分离器的设计匹配
引用本文:黄阔,蒋升龙,袁兆成. 车用发动机油气分离器的设计匹配[J]. 汽车技术, 2012, 0(3): 32-35
作者姓名:黄阔  蒋升龙  袁兆成
作者单位:1. 吉林大学
2. 华晨汽车工程研究院
基金项目:“大学生创新性实验计划”国家级资助项目(2011A42080)
摘    要:在分析发动机曲轴箱通风系统形式及几种油气分离器结构特点的基础上,确定了曲轴箱通风系统的设计方案:滤网油气过滤+旋风式油气分离器+PCV控制阀。在发动机机油量为标准值、最小值、最大值增加20%工况下,进行了全负荷曲轴箱通风试验。结果表明,所开发的曲轴箱通风系统在活塞窜气量增加1倍时,油气分离器和PCV控制阀之间无可见油流,曲轴箱漏气量和曲轴箱压力符合评价指标要求,提高了油气分离效率。

关 键 词:汽油机  曲轴箱通风系统  油气分离器  设计

Design and Matching of Oil Gas Separator in the Vehicle Engine
Huang Kuo , Jiang Shenglong , Yuan Zhaocheng. Design and Matching of Oil Gas Separator in the Vehicle Engine[J]. Automobile Technology, 2012, 0(3): 32-35
Authors:Huang Kuo    Jiang Shenglong    Yuan Zhaocheng
Affiliation:1(1.Jilin University;2.Brilliance Automobile Research Institute)
Abstract:In this article,we analyzed the structural feature of engine crankcase ventilation system and several types of oil gas separators and defined the design program of crankcase ventilation system: strainer oil gas filter+whirl oil gas separator+PCV control valve.Full load crankcase ventilation test was made with standard engine oil quantity,minimum oil quantity and the maximum oil quantity.The results show that with the developed crankcase ventilation system,there is no oil flow visible between oil gas separate and PCV control valve when piston gas blow-by is increased by one time,and crankcase gas leakage and crankcase press comply with requirement of evaluation criteria,oil gas separation efficiency is improved.
Keywords:Gasoline engine  Crankcase ventilation  Oil gas separator  Design
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号