| 氨氮废水处理工程设计 |
| |
| 引用本文： | 马长君.氨氮废水处理工程设计[J].广州化工,2011,39(7):137-138,143. |
| |
| 作者姓名： | 马长君 |
| |
| 作者单位： | 东华工程科技股份有限公司,安徽,合肥,230024 |
| |
| 摘 要： | 采用水解+IMC池+BAF工艺处理氨氮废水.进水水质CODcr=500mg/L,NH3-N:350 mg/L时,经该工艺处理后出水能够满足环评对总量控制(CODcr=20mg/L,NH3-N:3 mg/L)的要求.
|
| 关 键 词： | 氨氮废水 IMC池(改良SBR工艺) BAF |
Engineering Design on Wastewater Treatment of Ammonia Nitrogen |
| |
| MA Chang-jun.Engineering Design on Wastewater Treatment of Ammonia Nitrogen[J].GuangZhou Chemical Industry and Technology,2011,39(7):137-138,143. |
| |
| Authors: | MA Chang-jun |
| |
| Affiliation: | MA Chang-jun (East China Engineering Science and Technology Co.,Ltd.,Anhui Hefei 230024,China) |
| |
| Abstract: | Hydrolyzation+IMC pond(improved SBR process)+BAF process was adopted for ammonia nitrogen wastewater treatment.If the influent were CODCr=500 mg/L and NH3-N:350 mg/L,the effluent after treatment by such a process can meet the requirement of environmental evaluation for total amount control(CODCr=20 mg/L,NH3-N: 3 mg/L). |
| |
| Keywords: | ammonia nitrogen wastewater IMC pond(improved SBR process) BAF |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
