传动滚筒焊接位置的研究 |
| |
引用本文: | 唐伟. 传动滚筒焊接位置的研究[J]. 煤炭工程, 2011, 0(11): 106-107 |
| |
作者姓名: | 唐伟 |
| |
作者单位: | 西安科技大学机械工程学院 |
| |
摘 要: | 传动滚筒是带式输送机上的关键部件,其结构性能可靠性和使用寿命直接影响着输送机的性能。根据传动滚筒的结构类型、材料属性和受力情况,利用ABAQUS进行有限元分析,分别以1m、1.2m和1.4m传动滚筒为例,对带式输送机传动滚筒焊接位置进行了研究。结果表明:滚筒筒毂与筒体相连焊接位置控制在总长的12%~17%比较合理,为传动滚筒的设计提供了理论依据。
|
关 键 词: | 传动滚筒 ABAQUS 有限元分析 焊接位置 |
Research of the Welding Position for Drive Pulley |
| |
Abstract: | Drive pulley is a key component of belt conveyor. Its reliability and service life have serious impacts on the performance of conveyor. According to the structure types, material properties and stress of drive pulley, this paper completed finite element analysis by ABAQUS.Taking 1m、1.2m and 1.4m drive pulley as examples, its welding position was studied. The results showed that welding position controlled in general 12 ~ 17 percent between cylinder and hub is reasonable, which provided a theoretical basis for drive pulley design. |
| |
Keywords: | drive pulley ABAQUS finite element analysis welding position |
|
| 点击此处可从《煤炭工程》浏览原始摘要信息 |
|
点击此处可从《煤炭工程》下载免费的PDF全文 |