| 基于冷轧套筒承载力的加劲肋间距优化及试验验证 |
| |
| 引用本文： | 赵军,张明浩,朱万旭,宋诚,殷俊.基于冷轧套筒承载力的加劲肋间距优化及试验验证[J].混凝土,2020(3):154-156. |
| |
| 作者姓名： | 赵军 张明浩 朱万旭 宋诚 殷俊 |
| |
| 作者单位： | 桂林理工大学 土木与建筑工程学院,广西 桂林 541004;桂林理工大学 广西岩土力学与工程重点实验室,广西 桂林 541004;桂林理工大学 土木与建筑工程学院,广西 桂林 541004 |
| |
| 基金项目： | 国家自然科学基金;广西岩土力学与工程重点实验室项目 |
| |
| 摘 要： | 灌浆套筒加劲肋间距的改变将直接影响结构的承载能力,为了获取最优的间距参数,利用有限元方法和现场试验进行了优化设计。结果表明,优化之后的灌浆套筒结构屈服强度提高了7%,极限强度提高了5%,同时说明有限元分析方法可有效的对套筒进行优化,对最佳设计方案的计算起到辅助作用;在灌浆套筒优化的问题中,以结构的最小应变能作为目标函数是可行的。
|
| 关 键 词： | 灌浆套筒 优化设计 数值模拟 承载力 |
Spacing optimization of stiffeners and the experimental,on basis of the bearing capacity of cold rolled sleeve verification |
| |
| ZHAO Jun,ZHANG Minghao,ZHU Wanxu,SONG Cheng,YIN Jun.Spacing optimization of stiffeners and the experimental,on basis of the bearing capacity of cold rolled sleeve verification[J].Concrete,2020(3):154-156. |
| |
| Authors: | ZHAO Jun ZHANG Minghao ZHU Wanxu SONG Cheng YIN Jun |
| |
| Affiliation: | (Department of Civil Engineering and Architecture,Guilin University of Technology,Guilin 541004,China;Guangxi Key Laboratory of Geomechanics and Geotechnical Engineering,Guilin University of Technology,Guilin 541004,China) |
| |
| Abstract: | The change of spacing between grouting sleeve stiffeners will directly affect the bearing capacity of the structure.In order to obtain the optimal spacing parameters,the finite element method and field test are used to optimize the design.The results showed that the yield strength of the optimized grouting sleeve structure increased by 7%and the ultimate strength increased by 5%.At the same time,it shows that the finite element analysis method can effectively optimize the sleeve and play a supplementary role in the calculation of the optimal design scheme.In the case of grouting sleeve optimization,it is feasible to take the minimum strain energy of the structure as the objective function. |
| |
| Keywords: | grout sleeve optimal design numerical simulation bearing capacity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
