| 冷滚轧渐开线花键成形原理及理论误差计算分析 |
| |
| 引用本文： | 吕耀峰,崔凤奎,杨建玺,高振山,全建辉,胡向军,薛玉君. 冷滚轧渐开线花键成形原理及理论误差计算分析[J]. 组合机床与自动化加工技术, 2007, 0(5): 20-23 |
| |
| 作者姓名： | 吕耀峰 崔凤奎 杨建玺 高振山 全建辉 胡向军 薛玉君 |
| |
| 作者单位： | 河南科技大学,机电工程学院,洛阳,471003 |
| |
| 基金项目： | 河南省科技攻关项目;河南省自然科学基金;河南省科技攻关项目 |
| |
| 摘 要： | 通过对冷滚轧渐开线花键加工原理分析，按照空间啮合原理，建立了花键齿面三维数学模型，揭示了花键冷滚轧过程中滚轮和工件之间运动规律。针对花键的齿形误差和齿向误差，按照误差计算原理，得出了计算结果及其随安装角改变的变化规律。并对花键成形原理进行分析，指出了花键的成形方法为范成法。为正确设计滚轮奠定了基础。
|
| 关 键 词： | 冷滚轧 渐开线花键 齿形误差 齿向误差 成形原理 |
| 文章编号： | 1001-2265(2007)05-0020-04 |
| 修稿时间： | 2006-11-15 |
Forming Theory and Error Calculating of Cold Rolling Involute Spline |
| |
| LU Yao-feng,CUI Feng-kui,YANG Jian-xi,GAO Zhen-shan,QUAN Jian-hui,HU Xiang-jun,XUE Yu-jun. Forming Theory and Error Calculating of Cold Rolling Involute Spline[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2007, 0(5): 20-23 |
| |
| Authors: | LU Yao-feng CUI Feng-kui YANG Jian-xi GAO Zhen-shan QUAN Jian-hui HU Xiang-jun XUE Yu-jun |
| |
| Abstract: | In accordance with space engaging principle and analyzing the processes of cold rolling involute spline, a general 3-D mathematic model of involute spline is built up. The objective moving laws between roller and workpiece is obtained from the modeling process of spline. The tooth profile error and longitudinal form error are calculated, and the change role with setting angle of them is got. The forming process of the spline is generating method. Then, a theoretical foundation is established for roller designing correctly. |
| |
| Keywords: | cold rolling involute spline profile error longitudinal form error forming theory |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
