| 陶瓷涂层性能影响因素及工艺优化研究 |
| |
| 引用本文： | 黄燕滨,邵新海,宋高伟,仲流石.陶瓷涂层性能影响因素及工艺优化研究[J].装备环境工程,2012,9(1):90-93. |
| |
| 作者姓名： | 黄燕滨 邵新海 宋高伟 仲流石 |
| |
| 作者单位： | 装甲兵工程学院装备再制造工程系,北京,100072 |
| |
| 摘 要： | 为了提高Al2O3陶瓷涂层的综合性能,对陶瓷涂层性能影响因素进行了正交试验设计。以磨损量、结合强度和耐腐蚀性为评价指标,得出了在Al2O3陶瓷颗粒粒径为160目,颗粒填入量为125%,涂层厚度为1 mm时,综合性能最好。同时利用差示扫描量热（DSC）技术推算出胶粘剂体系的最佳固化工艺为50℃（1h）→100℃（2 h）→225℃（1h）;采用磷酸阳极化（PAA）方法对铝合金基体表面进行处理,使其与涂层之间获得最好的结合强度。
|
| 关 键 词： | 陶瓷涂层 正交试验 差示扫描量热（DSC） 磷酸阳极化 |
| 收稿时间： | 9/5/2011 12:00:00 AM |
Research of Influencing Factors on Performance and Process Optimization of Ceramic Coating |
| |
| HUANG Yan-bin,SHAO Xin-hai,SONG Gao-wei and ZHONG Liu-shi.Research of Influencing Factors on Performance and Process Optimization of Ceramic Coating[J].Equipment Environmental Engineering,2012,9(1):90-93. |
| |
| Authors: | HUANG Yan-bin SHAO Xin-hai SONG Gao-wei and ZHONG Liu-shi |
| |
| Affiliation: | (Department of Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072, China) |
| |
| Abstract: | To improve the comprehensive performance of AlzO~ ceramic coating, orthogonal design was applied to the influencing factors of ceramic coating. Abrasion amount, bonding strength, and corrosion resistance were selected as evaluation index. The results showed that when the size of A1203 ceramic particle is 160 meshes, fillings of particle is 125%, and thickness of coating is lmm, the coating has the best comprehensive performance. The best cure process of its adhesive system was obtained by using differential scanning calorimetry（DSC） and calculation, which is 50℃ （lh）--~100 ℃（2 h）---）225 ℃ （lh）; to improve the adhesive strength of coating, the surface of aluminium alloy is treated by phosphoric acid anodizing （PAA）. |
| |
| Keywords: | ceramic coating orthogonal experiment differential scanning calorimetry （DSC） phosphoric acid anodizing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《装备环境工程》浏览原始摘要信息 |
|
点击此处可从《装备环境工程》下载全文 |
|
