高速色散补偿系统中喇曼放大器性能研究

利用喇曼放大器的非线性偏微分耦合方程组,对带喇曼放大器的色散补偿系统进行了仿真,并与传统的仿真方法进行了比较.结果表明:在色散完全补偿系统中,当传输速率较高时,忽略色散后的传统仿真方法的结果,与采用色散补偿技术后使整个系统色散为零的仿真结果有一定偏差,此时不能忽略色散的作用.还对前补偿系统和后补偿系统进行了研究,利用Q值性能判别法,分别得到了信号光脉冲的最佳占空比和最佳脉冲阶数.     

Augmented Spinor Space

In this paper, based on the Pauli matrices, a notion of augmented spinor space is introduced, and a uniqueness of such augmented spinor space of rank n is proved. It may be expected that this new notion of spaces can be used in mathematical physics and geometry.     

超短脉冲激光微束对细胞作用的研究

本文详细地介绍了我们自己设计和安装的一个Nd:YAG超短脉冲激光微束系统,该系统分成二个部分:激光源和显微镜。由电光调Q非稳腔Nd:YAG激光倍频后得到355nm紫外光进入显微镜并由物镜聚焦。同时,这超短脉冲激光微束照射在细胞上并且在细胞上产生一个可以自恢复的小孔。在文中我们还讨论了超短脉冲激光微束与细胞之间作用效应及机理。     

超级活性炭的合成及活化反应机理

以石油焦为原料,采用碱熔活化法合成出具有超高比表面的超级活性炭.借助XRD、TG DTA、N2吸附实验等手段,对其结构与性能进行了表征.同时,设计原位TG DTA测试技术、反应快速终止技术,对超级活性炭合成机理进行了考察,提出了两段活化反应机理,即中温径向活化机理和高温横向活化机理.发现K2O、－O－K＋以及－CO－2K＋是径向活化为主的中温活化段的活化剂活性组分,而处于熔融状态的K＋O－、K＋则是横向活化为主的高温活化段的催化活性组分.并发现径向活化是超级活性炭形成发达微孔分布的主要途径,也是控制超级活性炭微孔分布的主要手段.而高温横向活化机理则是导致超级活性炭形成大孔的主要途径.高温横向活化与中温径向活化一起构成石油焦基超级活性炭形成的主要机理.     

Learning-based compressed sensing for infrared image super resolution

This paper presents an infrared image super-resolution method based on compressed sensing (CS). First, the reconstruction model under the CS framework is established and a Toeplitz matrix is selected as the sensing matrix. Compared with traditional learning-based methods, the proposed method uses a set of sub-dictionaries instead of two coupled dictionaries to recover high resolution (HR) images. And Toeplitz sensing matrix allows the proposed method time-efficient. Second, all training samples are divided into several feature spaces by using the proposed adaptive k-means classification method, which is more accurate than the standard k-means method. On the basis of this approach, a complex nonlinear mapping from the HR space to low resolution (LR) space can be converted into several compact linear mappings. Finally, the relationships between HR and LR image patches can be obtained by multi-sub-dictionaries and HR infrared images are reconstructed by the input LR images and multi-sub-dictionaries. The experimental results show that the proposed method is quantitatively and qualitatively more effective than other state-of-the-art methods.     

Self-assembly behavior of copolymers with super segregated structure containing fluorinated segments

Copolymers with super segregated structure of hydrophilic methoxy poly（ethylene glycol） （mPEG） and fluorophilic poly（1H,1H,2H,2H-perfluorodecyl acrylate） （PFA） were prepared. And just because of this super segregated structure which was resulted from the extremely strong incompatibility between the two blocks, several interesting self- assembly behaviors of the copolymers were displayed and studied under different conditions. Transmission electron microscope （TEM） showed that with the increase of PFA in the polymerization system, the incompatibility in this super segregated structure became stronger, and the self-assembly behavior changed from ball-like or rod-like to vesicles, and finally collapsed to sheet-like. The self-assembly behavior changed likewise when the initial concentration increased. And the interesting formation of these barrel-like and spindle-like vesicles was finally studied with different cooling speeds. It＇s finally found that with this super segregation structure, these new self-assembly morphology might be formed due to the extremely strong incompatibility between mPEG and PFA segments.     

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Due to the environmental pollution caused by the petroleum-based polymer, poly (lactic acid) (PLA), a biodegradable and biocompatible polymer that obtained from natural and renewable sources, has attracted widespread attention. However, the brittleness of PLA greatly limits its application. In this study, the super toughened PLA-based blends were obtained by compatibilizing the PLA/thermoplastic polyurethane (TPU) blends with the polyurethane elastomer prepolymer (PUEP) as an active compatibilizer. The mechanical properties, thermal properties and corresponding toughening mechanism of PLA/TPU/PUEP system were studied by tensile test, instrumented impact test, dynamic mechanical analysis (DMA), scanning electronic microscope (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). All the results demonstrate that the isocyanate (−NCO) group in PUEP is successfully reacted with the –OH groups at both sides of the PLA and the obtained polyurethane (PU)~PLA copolymer (PU ~ cõ PLA) significantly improves the interfacial compatibility of PLA/TPU blends. The gradually refined dispersed phase size and fuzzy phase interface as displayed in SEM images suggest a good interfacial compatibilization in the PLA/TPU/PUEP blends, probably due to the isocyanate reaction between PLA and PUEP. And the interfacial reaction and compatibilization among the components led to the formation of super toughened PLA/TPU/PUEP blends. And the instrumented impact results indicate that most of the impact toughness is provided by the crack propagation rather than the crack initiation during the entire fracture process.     

Electrochemical devices obtained from biochar: Advances in renewable and environmentally-friendly technologies applied to analytical chemistry

Biochar is the carbon-rich material produced from organic feedstock such as agricultural wastes and municipal solid waste in limited oxygen atmosphere and under certain thermal combustion. Due to its high carbon content, high cation exchange capacity, large surface and stability structure, it has been applied in different field of knowledge. In relation to environment analytical chemistry the studies about biochar majorly focus in degradation of contaminants and soil and water remediation. However, due to its excellent electrical conductivity, biochar has been also applied to the manufacture of sensitive, robust, efficient and inexpensive devices applied to supercapacitor-based energy storage and chemically modified electrodes or sensors. Therefore, this review describes about obtention, modification and characterization of biochar as well as the pertinent aspects of electrochemical devises based on biochar and a general discussion about the environmental concern of biochar, challenges and prospects.     

变频空调制冷系统流量调节性能分析和实验研究

通过实验分析不同膨胀阀开度和压缩机频率下系统性能。过热度在‘0’点及前后情况下,制冷系统性能及回油状况随膨胀阀开度调节,会出现较大变化。且在过热度为‘0’时系统制冷量和能效比最高。同时对不同频率下系统性能参数变化规律尤其是换热器效率影响进行分析。给出膨胀阀开度和压缩机变转速联合调节在系统性能最优状态下调节策略。