Thermoluminescence studies of zinc borate (ZnB2O4) phosphor doped with rare earths for dosimetric aspects

A series of ZnB₂O₄ phosphors doped with different concentrations of Eu and Dy (0.05 0.1, 0.2, 0.5, 1.0 mol%) and co-doped with Ce (1, 2, 5, 7, 10 mol%) respectively was prepared via the solid-state reaction technique and the thermoluminescence (TL) behaviour of gamma ray-irradiated samples was studied. The synthesized samples were irradiated with γ-rays for the dose range 0.03–1.20 kGy. The TL intensity variations with dose, dopant concentration, and the effect of co-doping were studied. The TL response curves for ZnB₂O₄:Eu³⁺ and ZnB₂O₄:Dy³⁺, ZnB₂O₄:Eu³,Ce³⁺ and ZnB₂O₄:Dy³⁺,Ce³⁺ phosphor were observed. It was revealed that ZnB₂O₄:Eu³⁺ showed a linear TL behaviour for the dose 0.03–1.20 kGy and ZnB₂O₄:Dy³⁺ showed linearity for the gamma dose range 0.03–0.10 kGy. Furthermore, fading for all the samples was observed to be less than 10% for a storage period of 30 days. In addition to this, the trapping parameters, especially activation energies were evaluated using the Ilich method and the initial rise method. The activation energy values obtained from both methods were in complete agreement with each other.     

Characteristics of rare earth (RE = Eu,Tb, Tm)‐doped Y2O3 phosphors for thermometry

The temperature‐dependent photoluminescences of Y₂O₃:Eu (6% Eu), Y₂O₃:Tb (4% Tb) and Y₂O₃:Tm (1% Tm) were investigated for high‐temperature phosphor thermometry. Two different phases, the monoclinic phase and cubic phase, were considered because the fluorescence spectra vary with the phase. To employ the intensity ratio method, we investigated their photoluminescence spectra under the excitation light of an Hg–Xe lamp as the temperature was elevated from room temperature to more than 1200 K. As a result, it was confirmed that the luminescence intensity of all of the phosphors varied with elevating temperature, i.e. thermal quenching, with the variations depending on the type of rare earth impurity and their phases. The results indicate that Y₂O₃:Eu phosphors are applicable to the intensity ratio method because they show appropriate variations in the intensity ratio of two emission lines, and they also have strong and sharp peak intensities without excessive optical noise or black body radiation over a wide range of temperatures. The intensity ratios for Y₂O₃:Tb provide such small variations with temperature that the temperature resolution is low, despite the strong emission intensities. As for Y₂O₃:Tm, the intensity ratios also have a low temperature resolution and their emission intensities are weak. Therefore, Y₂O₃:Tb and Y₂O₃:Tm are not appropriate for the intensity ratio method for phosphor thermometry. Copyright © 2010 John Wiley & Sons, Ltd.     

Energy transfer between Ce3+ → Gd3+ or Tb3+ in KNaSO4 microphosphor

KNaSO₄ microphosphor doped with Ce,Gd and Ce,Tb and prepared by a wet chemical method was studied using X‐ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) characterization. KNaSO₄ has a 5‐µm particle size detected by SEM. KNaSO₄:Ce³⁺,Tb³⁺ showed blue and green emission (at 494 nm, 557 nm, 590 nm) of Tb³⁺ due to ⁵D₄ → ⁷F_J (J = 4, 5, 6) transitions. KNaSO₄:Ce³⁺,Gd³⁺ showed luminescence in the ultraviolet (UV) light region at 314 nm for an excitation at 271 nm wavelength. It was observed that efficient energy transfer took place from Ce³⁺ → Gd³⁺ and Ce³⁺ → Tb³⁺ sublattices indicating that Ce³⁺ could effectively sensitize Gd³⁺ or Tb³⁺ (green emission). Ce³⁺ emission weakened and Gd³⁺ or Tb³⁺ enhanced the emission significantly in KNaSO₄. This paper discusses the development and understanding of photoluminescence and the effect of Tb³⁺ and Gd³⁺ on KNaSO₄:Ce³⁺. Copyright © 2015 John Wiley & Sons, Ltd.     

Tunable emission,energy transfer and charge compensation in SrMoO4:Sm3+,Tb3+,Na+ phosphor

A series of SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ phosphors was synthesized using a high‐temperature solid‐state reaction method in air. On excitation at 290 nm, SrMoO₄:Sm³⁺,Tb³⁺ phosphor emitted light that varied systematically from green to reddish‐orange on changing the Sm³⁺ and Tb³⁺ ion concentrations. The emission intensities of SrMoO₄:Sm³⁺ and SrMoO₄:Sm³⁺,Tb³⁺ phosphors were increased two to four times due to charge compensation when Na⁺ was added as a charge compensator. The luminescence mechanism and energy transfer could be explained using energy‐level diagrams of the MoO₄^2– group, Sm³⁺ and Tb³⁺ ions. SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ could be used as reddish‐orange phosphor in white light‐emitting diodes (LEDs) based on an ~ 405 nm near‐UV LED chip. This research is helpful in adjusting and improving the luminescence properties of other phosphors. Copyright © 2015 John Wiley & Sons, Ltd.     

Blue excitable green emitting Ce3+ doped CaS phosphor for w‐LEDs

CaS:Ce³⁺ is an efficient green‐emitting (535 nm) phosphor, excitable with blue light (450–470 nm) and was synthesized via a solid‐state reaction method by heating under a reducing atmosphere. The luminescent properties, photoluminescent (PL) excitation and emission of the phosphor were analyzed by spectrofluorophotometry. The excitation and emission peaks of the CaS:Ce³⁺ phosphor lay in the visible region, which made them relevant for light‐emitting diode (LED) application for the generation of white light. Judd‐Oflet parameters were calculated and revealed that green light emitted upon blue illumination. The prepared phosphor had strong blue absorption at 470 nm and a broad green emission band range from 490–590 nm with the peak at 537 nm. The characteristics of the CaS:Ce³⁺ phosphor make it suitable for use as a wavelength tunable green emitting phosphor for three band white LEDs pumped by a blue LED (470 nm). The Commission International de l'Eclairage co‐ordinates were calculated by a spectrophotometric method using the spectral energy distribution (0.304, 0.526) and confirm the green emission. The potential application of this phosphor is as a phosphor‐converted white light‐emitting diode. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence in Ba2Sr2Al2O7:RE (RE = Tb3+,Eu3+ and Dy3+) novel aluminate phosphors

The luminescence of novel rare earth ( Tb ^{3 +} , Eu ^{3 +} and Dy ^{3 +} )‐activated Ba ₂ Sr ₂ Al ₂ O ₇ phosphors for solid‐state lighting is presented. The aluminate phosphors were synthesized using a one‐step combustion method. X‐Ray diffraction, scanning electron microscopy and photoluminescence characterizations were performed to understand the mechanism of excitation and the corresponding emission in the as‐prepared phosphor, as characterized the phase purity and microstructure. Improvements in the luminescence properties of the phosphors with rare earth concentration were observed. The phosphor hue could be tuned from blue, green and red by proper selection of rare earth ions in typical concentrations. Effective absorption in the near‐ultraviolet region was observed, which makes the phosphor a potential candidate for ultraviolet light‐emitting diodes. Copyright © 2016 John Wiley & Sons, Ltd.     

Persistent phosphors for luminous paints: A review

The article briefly reports the fundamental scientific principles and landmarks in the field of luminescence and further enlightens the importance of persistent phosphor that is now widely used in luminous paints. Its main focus is on phosphorescence that makes use of lanthanides that have gained paramount importance in various cross-sections of luminescent applications. Both inorganic and organic afterglow materials, synthesis and characterization along with skilled researchers' essential updates on emerging trends and efforts are elucidated at length. It exclusively reviews the red/green/blue organic/inorganic/hybrid phosphorescent materials and the latest advances in the development of novel long afterglow materials that can accelerate the green technology in the world of luminescence.     

Photoluminescence of Dy3+ activator sensitized by Ce3+ in KNaSO4 microphosphor

The KNaSO₄ microphosphor doped with Ce or Ce and Dy prepared by a wet chemical method was studied by scanning electron microscopy (SEM) and characterized by photoluminescence (PL). KNaSO₄ has a 5‐µm particle size detected by SEM. The KNaSO₄:Ce³⁺ spectrum shows a single emission band at 327 nm for an excitation of 269 nm due to 5d → 4f transition of the Ce³⁺ ion, indicating weak spin orbiting coupling of the Ce³⁺ ground state. Efficient energy transfer takes place from Ce³⁺ → Dy³⁺ sublattices indicating that Ce³⁺ could effectively sensitize Dy³⁺ (orange emission) and that the Ce³⁺ emission weakens significantly in KNaSO₄. The powder form of prepared KNaSO₄ show negligible change in morphologies and hence no effect on the particle size. The characteristics of this powder could provide improved luminescence properties. The development and understanding of this photoluminescence and the effect of Dy³⁺ on KNaSO₄: Ce³⁺ are discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Optical properties and energy transfer of Eu2+/Ce3+ co‐activated Na3Ca6(PO4)5 phosphor

Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ phosphors were prepared using a combustion‐assisted synthesis method. X‐Ray powder diffraction (XRD) analysis confirmed the formation of a Na₃Ca₆(PO₄)₅ crystal phase. Na₃Ca₆(PO₄)₅:Eu²⁺ phosphors have an efficient bluish‐green emission band that peaks at 489 nm, whereas Ce³⁺‐doped Na₃Ca₆(PO₄)₅ showed a bright emission band at 391 nm. Analysis of the experimental results suggests that enhancement of the Eu²⁺ emission intensity in co‐doped Na₃Ca₆(PO₄)₅:Eu²⁺,Ce³⁺ phosphors is due to a resonance‐type energy transfer from Ce³⁺ to Eu²⁺ ions, which is predominantly governed by an exchange interaction mechanism. These results indicate that Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ is potentially useful as a highly efficient, bluish‐green emitting, UV‐convertible phosphor for white‐light‐emitting diodes. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescent properties of Ca3SiO4Cl2 co‐doped with Ce3+ and Eu2+ for near‐ultraviolet light‐emitting diodes

Ca₃SiO₄Cl₂ co‐doped with Ce³⁺,Eu²⁺ was prepared by high temperature reaction. The structure, luminescent properties and the energy transfer process of Ca₃SiO₄Cl₂: Ce³⁺,Eu²⁺ were investigated. Eu²⁺ ions can give enhanced green emission through Ce³⁺ → Eu²⁺ energy transfer in these phosphors. The green phosphor Ca_2.9775SiO₄Cl₂:0.0045Ce³⁺,0.018Eu²⁺ showed intense green emission with broader excitation in the near‐ultraviolet light range. A green light‐emitting diode (LED) based on this phosphor was made, and bright green light from this green LED could be observed by the naked eye under 20 mA current excitation. Hence it is considered to be a good candidate for the green component of a three‐band white LED. Copyright © 2015 John Wiley & Sons, Ltd.