Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

An Extreme Value Analysis of Pollutant Concentrations in Surface Soils Due to Atmospheric Deposition

Risk assessments often rely on deterministic models using long-term averages or “steady-state” values of input variables. Such models do not provide the information needed to estimate acute exposures. This study uses extreme value theory to examine the frequency and magnitude of daily pollutant concentrations in surface soils predicted at six U.S. locations. Concentrations are predicted using a deposition-leaching model and 50 years of historical precipitation data. A stochastic model also is used to generate 1000 years of precipitation data as modeling inputs for each location. The annual maximum concentrations at each site are fitted to a Gumbel type I distribution to estimate occurrence probability. For soluble pollutants, the predicted concentration varied substantially with precipitation, and the maximum daily concentrations exceeded annual averages by 4 to 8 times. Observed and synthetic precipitation data produced similar results at most study locations, though the synthetic data provided a slightly better fit to the Gumbel type I distribution. The precipitation model allows the generation of representative precipitation data that extend limited historical records. The extreme value analysis facilitates the evaluation of maximum pollutant concentrations, return periods, and other statistics that are important in evaluating acute exposures.     

The unpredictability of favourability: condition assessment and protected areas in England

The probability that protected areas will deliver their potential for maintaining or enhancing biodiversity is likely to be maximised if they are appropriately and effectively managed. As a result, governments and conservation agencies are devoting much attention to the management of protected areas. In the U.K., the demand for performance accountability has resulted in Public Service Agreements (PSA) that set out targets for government departments to deliver results in return for investments being made. One such target for England is to ensure that all nationally important wildlife sites are in favourable condition by 2010. Here, we tested the hypothesis, of potential strategic importance, that the ecological condition of these sites is predictable from relationships with a range of physical, environmental and demographic variables. We used binary logistic regression to investigate these relationships, using the results of English Nature’s 1997–2003 condition assessment exercise. Generally, sites in unfavourable condition tend to be larger in area, located at higher elevations, but with higher human population density and are more spatially isolated from units of the same habitat. However, despite the range of different parameters included in our models, the extent to which the condition of any given site could be predicted was low. Our results have implications for the delivery of PSA targets, funding allocation, and the location of new protected areas.     

In Pursuit of Safety: One-Hundred Years of Toxicological Risk Assessment

The publication in 1962 of Rachel Carson's Silent Spring marks the mid-point in a century that saw, in its first half, the emergence of public health concerns related to human exposures to chemicals, and, in its second half, the emergence of public policies to deal with those concerns. Those policies made it imperative that the scientific community come to grips with the problem of identifying exposure levels not likely to cause harm. This problem was not significantly discussed within the scientific community until the 1950s, and well-described methods for practical solutions to it did not appear until the 1970s. An important report from the National Academy of Sciences, published in 1983 (Risk Assessment in the Federal Government), provided an analysis of these emerging methods, and recommended a useful framework for the assessment and management of risk. This framework remains central to public health and regulatory decision-making. A high-level perspective is offered on events leading to and following the 1983 report. The article describes early thinking about chemical toxicity and the scientific path that thinking followed through the 20th century, and to the present.     

The significance of mycotoxins in the framework of assessing workplace related risks

Mycotoxins are fungal metabolite which may in some cases exhibit a high health hazard potential. Mycotoxins can show carcinogenic, mutagenic, toxic, teratogenic or immunotoxic effects. Mycotoxin exposure in the workplace may occur through inhalation and skin contact,e.g. during occupational handling of organic matter such as livestock feed, food products, or waste. Various studies suggest that both acute and chronic effects can occur, depending at least on the exposure level. The magnitude of the potential health risks associated with a respiratory or dermal intake of mycotoxins has largely remained unclear to date. However, according to the directive 2000/54/EC on biological agents and the corresponding German Biological Agents Ordinance, employers are also required to consider the potential hazards posed by toxic effects of biological agents when assessing workplace risks. The aim of this article, therefore, is to present some basis information that should facilitate an evaluation of the significance of mycotoxins in the context of assessing workplace risks. It also provides suggestions for occupational health and safety measures.     

Female and male Texas cichlids (Herichthys cyanoguttatum) do not fight by the same rules

Selection usually acts differently on males and females duringintrasexual competition for resources and/or mates. Nevertheless,agonistic behavior has been examined both theoretically andempirically mostly in males. Our research questions whethermales and females follow the same rules of engagement in intrasexualcontests as predicted by the sequential assessment model (SAM).The SAM predicts negative correlations between contest intensityand duration and the magnitude of asymmetry in resource holdingpower (RHP) between the contestants, such that the most escalatedcontests are those between similarly endowed individuals. Westaged male and female intrasexual contests with varying degreesof body size asymmetry under a round robin design using themonogamous Texas cichlid fish (Herichthys cyanoguttatum) asa study case. We used Mantel's matrix analysis to compare howthe behavioral content, duration, structure, and outcome ofmale and female contests were affected by the relative bodysize of the contestants. In the case of males, relative sizein each contest predicted outcome, duration, and frequency ofconventional and escalated behaviors according to prevailingtheory. Female contest structure and outcome, however, werenot predicted by the relative size of contestants. We discussour results in terms of other asymmetries that might be importantin structuring female contests, and we propose potential approachesto study female–female aggression.     

Novel strategies for assessing and managing the risks posed by invasive alien species to global crop production and biodiversity

International actions to combat the threat posed by invasive alien species (IAS) to crops and biodiversity have intensified in recent years. The formulation of 15 guiding principles on IAS by the Convention on Biological Diversity (CBD) stimulated the International Plant Protection Convention (IPPC) to review its role in protecting biodiversity. IPPC standards now demonstrate clearly that the risks posed by any organism that is directly or indirectly injurious to cultivated or uncultivated plants can be assessed and managed under the IPPC. Since the IPPC, unlike the CBD, constitutes an international legal instrument recognised by the World Trade Organization, greater protection from the introduction of IAS is now available. However, phytosanitary measures can only be enacted if they can be justified by risk analysis and we outline some novel strategies to improve the assessment and management of the risks posed by IAS, highlighting some of the key challenges which remain.     

How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.     

Uncertainty associated with river health assessment in a varying environment: The case of a predictive fish-based index in France

Sensitive biological measures of river ecosystem quality are needed to assess, maintain or restore ecological conditions of water bodies. Since our understanding of these complex systems is imperfect, decision-making requires recognizing uncertainty. In this study, a new predictive multi-metric index based on fish functional traits was developed to assess French rivers. Information on fish assemblage structure, local environment and human-induced disturbances of 1654 French river sites was compiled. A Bayesian framework was used to predict theoretical metric values in absence of human pressure and to estimate the uncertainty associated with these predictions. The uncertainty associated with the index score gives the confidence associated with the evaluation of site ecological conditions.Among the 228 potential metrics tested, only 11 were retained for the index computation. The final index is independent from natural variability and sensitive to human-induced disturbances. In particular, it is affected by the accumulation of different degradations and specific degradations including hydrological perturbations. Predictive uncertainty is globally lower for IPR+ than for underlying metrics.This new methodology seems appropriate to develop bio-indication tools accounting for uncertainty related to reference condition definition and could be extended to other biological groups and areas. Our results support the use of multi-metric indexes to assess rivers and strengthen the idea that examination of uncertainty could contribute greatly to the improvement of the assessment power of bio-indicators.