Modeling and simulation of a fully air swept ball mill in a raw material grinding circuit

A raw material grinding circuit was modeled using plant data. Samples were collected from around the circuit and, following a crash stop, from inside the mill. The size distributions of the samples were determined down to a few microns. Using the data from inside the mill a modeling approach, based on perfect mixing, was developed. The modelling approach implicitly assumes that the mixture of feed materials broken is homogenous from the breakage point of view. The air classification around the circuit was modeled using the efficiency curve approach. In order to measure the success of the method the circuit performance was predicted by simulation studies while it was operating at different conditions. The results were then compared with the measured data. It is concluded that modeling gives a useful quantitative indication of what may occur in fully air swept mills.     

Numerical study on PEMFC’s geometrical parameters under different humidifying conditions

Steady-state and three-dimensional simulations were carried out to study the influences of geometrical parameters on the performance of PEMFC under different hydrating conditions. Flow fields, species transport, transport of water in polymer membrane and movement of liquid water in cathode and anode porous layers were determined, in order to accomplish a complete estimation of ohmic and concentration losses of PEMFC power. The geometrical parameters were thickness of the polymer membrane, cathode catalyst layer as well as gas channel to rib width ratio. Every simulation was made under different relative humidities of inlet flows (50 and 100%) for every change of characteristic length. Results show that the influence of the geometrical parameters on ohmic and concentration losses is of considerable importance. The performance of PEMFC is seriously affected under dehydrating conditions. However, such performance may be considerably improved by using suitable geometrical parameters. Cathode and anode liquid saturation may not only affect the transport of species, but also the polymer electrolyte water content. These results show the importance of simultaneously calculating both the water absorption and desorption through the polymer electrolyte and the liquid saturation in the cathode and anode porous mediums to obtain an actual view of ohmic and concentration losses of the PEMFC performance.     

A Model for Through Drying of Tissue Paper at Constant Pressure Drop and High Drying Intensity

A mathematical model for through drying of paper at constant pressure drop was developed. The model is based on physical properties; hence, basis weight, pressure drop, drying air temperature, pore size distribution, initial gas fraction, and tortuosity are important input parameters to the model. The model was solved for different combinations of the variables basis weight, drying air temperature, and pressure drop corresponding to industrial conditions and the results were compared with data from bench-scale experiments. The simulations show that the drying rate curve is very sensitive to the air flow rate and that correctly modeling the correlation between pressure drop and air flow rate is the most important factor for a successful model for through drying. The model was tuned by adjusting the parameters initial gas fraction and tortuosity in order to give the best possible fit to experimental data. For a given basis weight and pressure drop, different drying air temperatures resulted in relatively constant values of the fitted parameters. This means that the model can well predict the effects of changes in drying air temperature based on a tuning of the model performed at the same basis weight and pressure drop. However, for a given basis weight, an increase in pressure drop yielded fitted parameters that were somewhat different; i.e., a lower initial gas fraction and a higher tortuosity, a change that increases the resistance to air flow. This implies that the correlation between pressure drop and air flow rate in the model does not quite capture the nonlinear relationship shown by the experiments.     

Fodor and Pylyshyn on connectionism

Fodor and Pylyshyn (1988) have argued that the cognitive architecture is not Connectionist. Their argument takes the following form: (1) the cognitive architecture is Classical; (2) Classicalism and Connectionism are incompatible; (3) therefore the cognitive architecture is not Connectionist. In this essay I argue that Fodor and Pylyshyn's defenses of (1) and (2) are inadequate. Their argument for (1), based on their claim that Classicalism best explains the systematicity of cognitive capacities, is an invalid instance of inference to the best explanation. And their argument for (2) turns out to be question-begging. The upshot is that, while Fodor and Pylyshyn have presented Connectionists with the important empirical challenge of explaining systematicity, they have failed to provide sufficient reason for inferring that the cognitive architecture is Classical and not Connectionist.     

Computers and translation: integrating IT into undergraduate foreign language learning

Abstract There are still many institutions of higher education in the UK, both universities and polytechnics, that have not taken on board the application of information technology to foreign language learning. Apart from considerations of cost, there is also the problem of time—deciding how best to use the limited time at one's disposal for exploring computer applications to foreign language learning. Both problems may be compounded by the mistaken belief that effective use of this 'new' technology necessarily involves learning one or more programming languages. This paper endeavours to show that recent advances in both software and hardware have produced computing tools of particular interest to translation and the translator, and that, since translation is a reality for large numbers of undergraduates in the UK, such tools represent an obvious starting point for the introduction of IT into the undergraduate curriculum.     

Kinetics of catalytic reactions with two types of sites: nonuniform surfaces

Several aspects of heterogeneous catalytic kinetics over induced nonuniform surfaces are considered. The reaction mechanism is thought to occur through a surface collision of species, adsorbed on two distinct surface sites, which display nonuniform behavior. The expressions for rates of elementary reactions have been deduced within the framework of the surface electronic gas model, which accounts for the case of inhomogeneous surface. Equations for catalyst activity in the range of medium coverage have been derived and compared with the power-law model.     

Evolution of BET internal surface area in glassy carbon powder during thermal oxidation

It is demonstrated that glassy carbon powder can be thermochemically activated. During activation, a film with open pores is created on the glassy carbon particles. This film has a large internal surface area, which is accessible to liquids and gases. A simple model for the evolution of the internal surface area in glassy carbon powder during thermochemical gas-phase oxidation is also presented and compared with experimental data. Experimental results are in qualitative agreement with the model. We found that a sharp particle size distribution is desirable with regard to potential technical applications.     

产品数据管理系统数据库设计

工程数据库EDB（Engineering Database），是工程设计及制造领域中相互有关的数据所组成的集合，本文在详细分析工程数据库的特点及其实现方式的基础上，结合SF－PDM数据库设计，深入讨论了使用UML进行数据库概念设计和逻辑设计的方法与步骤，总结介绍了SF－PDM数据库物理设计的思路与相关实现过程。