A direct estimate of JIc from the load versus load-line displacement record

The purpose of this study is to examine the current standard fracture toughness test procedure to determine if there could be an easier method to get a J_Ic value from the test record. The current method for determining J_Ic involves a detailed computational and construction procedure. The objective in this study is to simplify the analysis for the determination of J_Ic. The results of this study show that the load and displacement record for a fracture toughness test can be used to directly estimate a J_Q value, a provisional value for fracture toughness, J_Ic. The J value taken at the maximum load point can be used along with an adjustment factor to estimate a J_Q value. This J_Q estimate is close to the one obtained from the construction procedure of ASTM Standard E 1820. When a unit‐sized specimen is tested, that is, a specimen with a width of 50 mm and a thickness of 25 mm the maximum load point provides a direct estimate of J_Q. Other sizes require a size adjustment factor, which is simply a square root relationship between the width of the test specimen and a unit width. The proposed new method of estimating J_Q is simple in concept and requires a minimum number of calculations. It appears to produce values of J_Q which are comparable to those obtained from the ASTM E1820 construction procedure and may produce less scatter.     

HiSQL: A Front-end Query System for Historical Relational Databases

The paper describes a prototype system called HiSQL (Historical SQL) which extends the functionality of SQL in manipulating historical data, by providing functions for spatial and temporal processing. Conceptually the paper is divided into three parts: the first part deals with the design and architecture of the system; the second part introduces a case study (the defters); and the third part describes specific functions for spatial and temporal processing of serial documents. The paper concludes with a comparison between HiSQL and SQL and suggestions for further work. This revised version was published online in August 2006 with corrections to the Cover Date.     

中原油田深井大井眼段钻井液工艺

濮深8井是中原油田在西部洼陷南部寻找接替储量的一口重点深探井,也是中原油田第一口井深达6000m的超深井。分析了濮深8井钻井液的配备及维护和处理技术,得出深井大井眼段钻井液工艺技术存在以下问题:井眼大,钻井液量及钻屑量多,处理时间长,处理剂用量多,处理频繁;返速低使钻井液清洗井眼的能力减弱;井下温度高使处理剂的作用明显降低,二氧化碳的侵入使钻井液性能变差。钻井液维护处理的较好方法是定时、定量补充处理剂胶液。固相控制是深井大井眼段钻井液工艺中的关键问题,必须配套并且有效地使用固控设备,以维护好钻井液性能。     

华北油田鄚东地区深井钻井液技术

鄚东地区钻井过程中经常发生垮塌、卡钻、井漏等复杂事故。该地区深井钻井采用了抑制性及封堵性较强的铵基沥青树脂高密度钻井液体系,并根据地层特点,对不同井段制定了相应的钻井液维护处理措施。结果表明,该钻井液体系抑制性好,抗温、抗污染能力强,性能稳定,成功地控制了复杂事故的发生,满足了该地区深层钻井的要求。     

Deep levels,electrical and optical characteristics in SnTe-Doped GaSb Schottky Diodes

The GaSb layers investigated were grown directly on GaAs substrates by molecular beam epitaxy (MBE) using SnTe source as the n-type dopant. By using admittance spectroscopy, a dominant deep level with the activation energy of 0.23-0.26 eV was observed and its concentration was affected by the Sb₄/Ga flux ratio in the MBE growth. A lowest deep-level concentration together with a highest mobility was obtained for GaSb grown at 550°C under a Sb₄/Ga beam equivalent pressure (BEP) ratio around 7, which should correspond to the lowest ratio to maintain a Sb-stabilized surface reconstruction. In the Hall measurement, an analysis of the temperature-dependent mobility shows that the ionized impurity concentration increases proportionally with the sample’s donor concentration, suggesting that the ionized impurity was introduced by an SnTe source. In addition, optical properties of an undoped p-, a lightly and heavily SnTe-doped GaSb layers were studied by comparing their photoluminescence spectra at 4.5K.     

中压变频器在宣钢炼钢厂除尘风机中的应用

本文介绍了SIMOVERT MV中压变频器在宣钢炼钢厂一次除尘风机中的应用情况。变频器现场运行表明，采用中压变频器对转炉除尘风机进行调速节能获得了成功，节能效果明显。     

Controlled oxygen incorporation in indium gallium arsenide and indium phosphide grown by metalorganic vapor phase epitaxy

The defect engineering in metalorganic vapor phase epitaxy In_xGa_1-xAs and InP by controlled oxygen doping using diethyl aluminum ethoxide (DEALO) was developed in this study. DEALO doping has led to the incorporation of Al and O, and the compensation of shallow Si donors in In_xGa_1−xAs: Si with 0 ≤ x ≤ 0.25. With the same DEALO mole fraction during growth, the incorporation of Al and O was found to be independent of x, but the compensation of Si donors decreases with increasing In content. Deep level transient spectroscopy analysis on a series of In_xGa_1-xAs: Si. samples with 0 ≤ x ≤ 0.18 revealed that oxygen incorporation led to a set of deep levels, similar to those found in DEALO doped GaAs. As the In composition was increased, one or more of these deep levels became resonant with the conduction band and led to a high electron concentration in oxygen doped In_0.53Ga_0.47As. Low temperature photoluminescence emission measurements at 12K on the same set of samples revealed the quenching of the near-band edge peak, and the appearance of new oxygen-induced emission features. DEALO doping in InP has also led to the incorporation of Al and O, and the compensation of Si donors due to oxygen-induced multiple deep levels.     

东营深层盐膏层钻井液工艺

胜利油田东营深层盐膏地层发育,盐膏段厚度大,分布范围广,地层岩性十分复杂,钻井中经常发生喷、漏、塌、卡,遇阻、划眼、电测遇阻等井下复杂事故。郝科1井是在该区设计的一口重点深探井,宅钻井深5807.81m,井底最高温度230℃。介绍了深层盐膏层钻井液体系的转化工艺、性能控制、维护处理、防漏、堵漏、固相控制、抗污染和钻具缓蚀等技术,以及MMH聚合物饱和盐水钻井液在郝科1井的成功应用。结果表明,该钻井液在高密度下对盐膏层具有较强的抑制性、悬浮携砂性和抗污染性,抗温220—230℃。MMH聚合物饱和盐水钻井液体系及其配套技术满足了深层盐膏层钻井施工需要。     

光纤专用网中基于DSP的Q值在线检测模块的设计

基于误码率与Q值的对应关系，本文介绍一种Q值在线检测方法，模块设计采用DSP技术，并讨论了该模块在光纤工业专用网（FIN）中的应用。