Optical switching properties of RCo2-type alloy thin films by electrochemical hydrogenation

The switchable optical properties of Pd-protected RCo₂-type Ho_0.6Mm_0.4Co₂ alloy thin films have been investigated in a KOH electrolyte. The reversible optical switching has been carried out simultaneously by measuring transmitted light through the thin film during electrochemical charging–discharging of hydrogen. The dependence of switching speed and cyclic durability of the film on the charging and discharging current density as well as concentration of KOH electrolyte has been studied. In addition, cyclic voltammetric measurements have been performed to examine the hydride formation and decomposition reactions.     

结构陶瓷的高温疲劳强度衰减理论

提出了陶瓷材料疲劳强度衰减理论并由此导出了各种疲劳关系式。建立了疲劳基本方程ｄσ＿ｒ／ｄ＿ｉ＝一Ａσ（ｔ）￣ｎｔ￣（－ｍ），得出了疲劳寿命公式Ｔ＝Ｍ（σ＿０－σ）／Ａσ￣ｎ（静疲劳时Ｍ＝１，连续增载疲劳时Ｍ＝ｎ＋１，循环疲劳时Ｍ＝（ｎ＋１）／（１＋Ｒ＋Ｒ￣２＋……＋Ｒ￣ｎ），逐级加载时，并导出不同疲劳方式下疲劳寿命间的关系。同时，用多种Ｓｉ＿３Ｎ＿４材料在高温中作了论证试验，结果与理论一致。     

Location and calculation-free node-scheduling schemes in large wireless sensor networks

In wireless sensor networks that consist of a large number of low-power, short-lived, unreliable sensors, one of the main design challenges is to obtain long system lifetime without sacrificing system original performance (sensing coverage and sensing reliability). To solve this problem, one of the potential approaches is to identify redundant nodes at the sensing interface and then assign them an off-duty operation mode that has lower energy consumption than the normal on-duty mode. In our previous work [J. Wireless Commun. Mobile Comput. 3 (2003) 271; Processing of ACM Wireless Sensor Network and Application Workshop 2002, September 2002], we proposed a node-scheduling scheme, which can provide a 100% sensing coverage preservation capability. This, however, requires each node to be aware of its own and its neighbors’ location information. Also, in that scheme, each node has to do accurate geometrical calculation to determine whether to take an off-duty status. In this paper, we propose and study several alternative node-scheduling schemes, which cannot completely preserve the original system coverage, but are nonetheless light-weighted and flexible compared with the previous one. Our simulation results compare these schemes with the previous one and demonstrate their effectiveness.     

利用CRC校验提高HFC网络通信可靠性

有线电视网络分布广、环境复杂,通信过程中难免受到干扰,目前在一些厂家内部协议中的数据校验纠错方法还比较传统,不能有效起到抗干扰的作用.为了提高通信的可靠性,值得关注和广泛应用的是一种简单而重要的通信差错控制技术--CRC.介绍了循环冗余校验CRC(Cyclic Redundancy Check)的差错控制原理和程序实现,并提出更具有实际应用价值的快速CRC算法的程序实现.     

Integrating neural network technology and noise analysis

The integrated use of neural network and noise analysis technologies offers advantages not available by the use of either technology alone. The application of neural network technology to noise analysis offers an opportunity to expand the scope of problems where noise analysis is useful and unique ways in which the integration of these technologies can be used productively. The two-sensor technique, in which the responses of two sensors to an unknown driving source are related, is used to demonstration such integration. The relationship between power spectral densities (PSDs) of accelerometer signals is derived theoretically using noise analysis to demonstrate its uniqueness. This relationship is modeled from experimental data using a neural network when the system is working properly, and the actual PSD of one sensor is compared with the PSD of that sensor predicted by the neural network using the PSD of the other sensor as an input. A significant deviation between the actual and predicted PSDs indicate that system is changing (i.e., failing). Experiments carried out on check valves and bearings illustrate the usefulness of the methodology developed.     

Constructing Pseudo-Random Permutations with a Prescribed Structure

We show how to construct pseudo-random permutations that satisfy a certain cycle restriction, for example that the permutation be cyclic (consisting of one cycle containing all the elements) or an involution (a self-inverse permutation) with no fixed points. The construction can be based on any (unrestricted) pseudo-random permutation. The resulting permutations are defined succinctly and their evaluation at a given point is efficient. Furthermore, they enjoy a fast forward property, i.e. it is possible to iterate them at a very small cost. Received 10 August 2000 and revised 30 September 2000 Online publication 9 April 2001     

Promising alloys for intermediate-temperature solid oxide fuel cell interconnect application

The formation of a low Cr-volatility and electrically conductive oxide outer layer atop an inner chromia layer via thermal oxidation is highly desirable for preventing chromium evaporation from solid oxide fuel cell (SOFC) metallic interconnects at the SOFC operation temperatures. In this paper, a number of ferritic Fe–22Cr alloys with different levels of Mn and Ti as well as a Ni-based alloy Haynes 242 were cyclically oxidized in air at 800 °C for twenty 100-h cycles. No oxide scale spallation was observed during thermal cycling for any of these alloys. A mixed Mn₂O₃/TiO₂ surface layer and/or a (Mn, Cr)₃O₄ spinel outer layer atop a Cr₂O₃ inner layer was formed for the Fe–22Cr series alloys, while an NiO outer layer with a Cr₂O₃ inner layer was developed for Haynes 242 after cyclic oxidation. For the Fe–22Cr series alloys, the effects of Mn and Ti contents as well as alloy purity on the oxidation resistance and scale area specific resistance were evaluated. The performance of the ferritic alloys was compared with that of Haynes 242. The mismatch in thermal expansion coefficient between the different layers in the oxide scale was identified as a potential concern for these otherwise promising alloys.     

一个面积和功耗优化且适用于10/100 Base-T以太网的CMOS时钟恢复电路

提出了一个新的用于10 / 10 0 Base- T以太网中面积和功耗优化的时钟恢复电路.它采用双环路的结构,加快了锁相环路的捕获和跟踪速度;采用复用的方式,通过选择信号控制电路可分别在10 Mbps或10 0 Mbps模式下独立工作且能方便地实现模式间的互换,与采用两个独立的CDR电路相比节省了一半的面积;同时,电路中采用一般的延迟单元来取代DL L,并能保证环路性能不随工艺温度等条件引起的延迟单元、延迟时间的变化而变化,从而节省了功耗.Hspice模拟结果显示,在Vdd=2 .5 V时,10 0 Mbps模式下电路的功耗约为75 m W,稳态相差为0 .3 ns;10 Mbps模式时电路功耗为5 8m W