Vestibular Function Measurement Devices

Vestibular function laboratories utilize a multitude of diagnostic instruments to evaluate a dizzy patient. Caloric irrigators, oculomotor stimuli, and rotational chairs produce a stimulus whose accuracy is required for the patient response to be accurate. Careful attention to everything from cleanliness of equipment to threshold adjustments determine on a daily basis if patient data are going to be correct and useful. Instrumentation specifications that change with time such as speed and temperature must periodically be checked using calibrated instruments.     

Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 10¹³ to 10⁵ Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods.     

Heteroepitaxy of Cerium Oxide Thin Films on Cu(111)

An important part of fundamental research in catalysis is based on theoretical and modeling foundations which are closely connected with studies of single-crystalline catalyst surfaces. These so-called model catalysts are often prepared in the form of epitaxial thin films, and characterized using advanced material characterization techniques. This concept provides the fundamental understanding and the knowledge base needed to tailor the design of new heterogeneous catalysts with improved catalytic properties. The present contribution is devoted to development of a model catalyst system of CeO₂ (ceria) on the Cu(111) substrate. We propose ways to experimentally characterize and control important parameters of the model catalyst—the coverage of the ceria layer, the influence of the Cu substrate, and the density of surface defects on ceria, particularly the density of step edges and the density and the ordering of the oxygen vacancies. The large spectrum of controlled parameters makes ceria on Cu(111) an interesting alternative to a more common model system ceria on Ru(0001) that has served numerous catalysis studies, mainly as a support for metal clusters.     

Sensitive skin: correlation with skin surface microrelief appearance

BACKGROUND/PURPOSE: Sensitive skin is a condition associated with reduced tolerance to environmental factors and/or the application of topical products, such as cosmetics. Its pathophysiology has not been fully elucidated and few data are available on its prevalence. The aim of this study was to investigate possible correlation between objective sensitivity and skin surface microrelief. METHODS: During an epidemiological survey conducted for a campaign promoted by International Society of Plastic Dermatology in Italy, 243 adult healthy subjects of both sexes with no evident dermatological disorder but positive to the lactic acid stinging test, were submitted to cyanoacrylate stratum corneum stripping from the volar forearm for the determination of the irregularity of the skin surface microrelief (irregularity skin index (ISI)). RESULTS: A significant correlation was found between intensity of symptoms in stingers and ISI (r(s)=-0.47; P<0.001). CONCLUSION: Sensitive skin is common in the healthy population. ISI can contribute towards the identification of subjects with sensitive skin and the development of more specific skin treatments for this prevalent condition.     

电镜下的乙型肝炎表面抗原

本文对81例乙型肝炎病人的肝活检组织进行了电镜观察,发现HBsAg的阳性率达93.8％。电镜下,HBsAg细丝不仅有一般的管状细丝型,还有分枝管型和管泡型,而且CAH病人肝组织不易找到HBsAg丝(易见者仅9％),CPH,CLH则多数(79.5％)为易见及可见,二者有高度显著性差异(P<0.01)。     

A study of a method for distribution analysis of skin color

Background/aims: The objective and quantitative assessment of the skin is important in medical and cosmeceutical research. Assessment of color is an important element for analyzing the surface of the skin, which is usually determined subjectively by a doctor or using color analysis devices. These devices, however, cannot provide correct color information because color is construed from the mean value of the observation region, and analysis of color distribution is impossible. The purpose of this paper is to develop an objective analysis method to permit skin color measurement of each pixel unit of an image and analyze the distribution of skin surface color. Methods: The Skin Color Distribution Analyzer (SCDA) is an analysis method newly developed at the Research Institute for Skin Image at Korea University. The SCDA system presented in this paper performed a novel form of quantitative and objective analysis of skin color distribution using each pixel color model parameter found in image wavelength information. In this paper, distribution analysis was conducted on normal skin and skin lesions and skin affected by artificially induced irritant contact dermatitis and pigmented nevous. The method selected a grade using a color model parameter. Twenty healthy Korean males participated in this study. A comparative study of the eight anatomical areas was performed, including the exposure and non‐exposure parts and the medial aspect and the lateral aspect of the forearm. A reliability test for the SCDA system was also conducted with a spectrometer (SPEC) using the color analysis method. Results: Each skin lesion was precisely segmented by grade and each parameter hada different statistical significance for results of analysis of distribution in pigmented nevous and the artificially induced irritant contact dermatitis. Parameters L^*, b^*, a^*, and EI showed salient traits. Showed resemble measured result in the SCDA system and the SPEC of normal skin. The exposed site, in comparison with the non‐exposed site, showed a notable difference in the L^* parameter and a significant statistical difference in the x and z parameters, except b^*. The comparison of the medial and lateral aspects of the forearm showed a notable difference in the L^* parameter and a significant statistical difference in the parameters except y and b^*. In the reliability test result using the SCDA system and the SPEC, the SCDA system was highly reliabile in terms of the CV value in all color model parameters. Conclusions: The color distribution analysis method using the SCDA system has revealed an aspect that the existent method of medical research has not shown, and is considered to be more reliable than other methods. This method can provide better study findings because it can be applied to other fields in addition to the medical science field and the ripple effect is thought to be bigger in other science field too.     

关于生化自动分析仪噪音核查和反应限核查的几点讨论

生化自动分析仪在进行噪音核查和反应限核查之前，均已完成线性核查，已确定线性反应区，从吸光度-时间回归线计算出每分钟吸光度变化速度（△A／min）。在此基础上进行噪音核查（Noise Check）和反应限核查（Reaction Limit Check）。     

Immunogenicity and safety of a novel yeast Hansenula polymorpha-derived recombinant Hepatitis B candidate vaccine in healthy adolescents and adults aged 10–45 years

The aim was to determine whether the immunogenicity of an investigational hepatitis B vaccine (spHB) is at least as high as that of a licensed control vaccine, Engerix B^®, and to evaluate its safety before inclusion in new pediatric combination vaccines. Two randomized, controlled, blind-observer, Phase 3 trials were performed: one in Argentina (344 participants aged 10–15 years, 10 μg HBsAg/dose) and one in Uruguay (344 participants aged 16–45 years, 20 μg HBsAg/dose). Both vaccines were given in a 0, 1, 6 month schedule to all participants with a baseline anti-Hep B antibody titer <0.6 mIU/mL. Antibody titers were measured pre-dose 1, 1 month after dose 2, pre-dose 3, and 1 month after dose 3. Statistical non-inferiority analyses were performed on seroprotection rates (SP) post-dose 3 (% with anti-Hep B titers ≥10 mIU/mL; delta non-inferiority limit of −10%). In both studies, SP for the spHB vaccine was 100% and the spHB vaccine was non-inferior in terms of SP to the licensed control vaccine. GMTs post-dose 3 were approximately 1.8- and 4.1-fold higher for spHB in the 10–15 year and 16–45 year age groups, respectively. Reactogenicity was low for each vaccine, after each dose. This highly immunogenic hepatitis B candidate vaccine was selected for further investigation as a component of new pediatric combination vaccines.