The flame retardant mechanism of polyolefins modified with chalk and silicone elastomer

This paper presents the current understanding of the flame retardant mechanism of Casico?. The study includes the flame retardant effect of each individual component: ethylene–acrylate copolymer, chalk and silicone elastomer, as well as the formation of an intumescent structure during heating. The flame retardant properties were investigated by cone calorimetry and oxygen index tests. To obtain insight into the flame retardant mechanism, heat treatment under different conditions has also been performed. The results indicate that the flame retardant mechanism of Casico is complex and is related to a number of reactions, e.g. ester pyrolysis of acrylate groups, formation of carbon dioxide by reaction between carboxylic acid and chalk, ionomer formation and formation of an intumescent structure stabilized by a protecting char. Special emphasis is given to the formation of the intumescent structure and its molecular structure as evaluated from ¹³C MAS‐NMR and ²⁹Si MAS‐NMR, ESCA and XRD analysis. After treatment at 500°C the intumescent structure consists mainly of silicon oxides and calcium carbonate and after treatment at 1000°C the intumescent structure consists of calcium silicate, calcium oxide and calcium hydroxide. Copyright © 2003 John Wiley & Sons, Ltd.     

矿物溶解动力学与全球环境

硅酸盐矿物和碳酸盐矿物是构成地壳的主要造岩矿物,论述了两类矿物溶解动力学的研究现状与展望,指出两类矿物的溶解和沉积过程中CO2吸收和释放,对全球环境有重要影响。     

New nanocomposite materials based on polymerization of [oligo(oxyethylene) methacrylates] in the presence of montmorillonite clay

Intercalation of poly[oligo(oxyethylene) methacrylates] onto sodium montmorillonite (MMT) clay has been investigated. A polymer–clay hybrid has been synthesized through intercalation of the monomer followed by its solution free‐radical polymerization. Eight polymer–clay hybrids were prepared using different weight ratios of clay, different oligo(oxyethylene) lengths and different proportions of crosslinker. Evidence of the development of nanostructures is obtained from scanning electron microscopy, and wide‐angle X‐ray diffraction studies support these results which show disappearance of the peak characteristic to d₀₀₁ spacing. In this hybrid MMT is dispersed homogeneously in the polymer matrix. © 2003 Society of Chemical Industry     

Effect of temperature on methyl radical generation over Sr/La2O3 catalysts

The role of gas phase CH₃ radicals in the oxidative coupling of CH₄ over 1 wt% Sr/La₂O₃ is supported by the observations that (i) this is a very effective catalyst for the generation of CH₃ · radicals and (ii) the concentration of CH₃ · radicals increases with temperature over the range of 450 °C–800 °C.     

含碳酸盐萤石矿石全弱酸性浮选新工艺

对含碳酸盐较高的萤石矿石提出了不加纯碱的全弱酸性浮选新工艺,获得CaF_298.21％、SiO_20.67％,回收率为93.25％的良好指标,实现了低模数碳酸盐—萤石矿石的高纯分离。     

溶胶-凝胶法制备(Sr,Pb)TiO3纳米晶粉及表征

采用溶胶－凝胶法成功地合成了（Sr,Pb)TiO3纳米晶粉，并利用FTIR技术对凝胶的形成过程及350℃，1．5h煅烧获得的粉体材料进行了表征。实验以TG－DSC分析作为拟定煅烧温度的依据，以XRD作为煅烧产物的分析手段，最佳煅烧温度为600℃，所合成的（Sr,Pb)TiO3纳米晶粉的平均晶粒尺寸约为21nm，属钙钛矿型立方顺电相结构。     

液膜法分离富集,测定水中微量锶

用乳状液膜体系对锶进行分离富集，该体系包括协同流动载体（ＰＭＢＰ，ＴＢＰ），表面活性剂（ＳＰＡＮ８０）增强剂（丙三醇）溶剂（正己烷）和内相（１．２ｍｏｌ／Ｌ的盐酸溶液），实验表明，在适宜的条件下，锶的富集效率可达９９．５％以上，而在此条件下许多共存离子，如Ｆｅ＾３＋，Ａｌ＾３＋，Ｃａ＾２＋，Ｍｇ＾２＋，Ｂａ＾２＋，Ｃｒ＾３＋，ＣＯ＾２＋，Ｎｉ＾２＋，Ｚｒ＾４＋，Ｃｕ＾２＋，Ｚｎ＾２＋，Ｐｂ＾２＋和     

有机酯水玻璃砂在特大型铸钢件上的应用

以有机酯水玻璃砂替代CO2水玻璃砂,应用于特大型铸钢件的生产中。介绍了有机酯水玻璃砂的硬化机理。选用福建平潭20/40目原砂、模数为2.0~2.3的改性水玻璃、12%~16%的有机酯进行有机酯水玻璃砂配比。给出了混砂和造型操作过程中的注意事项。通过对油压机横梁、汽轮机缸体、油轮挂舵臂和宽厚板轧机机架等一些特大型铸钢件的生产,实践表明:采用有机酯水玻璃砂后,铸件质量明显提高,铸件气孔、裂纹减少,表面光洁,尺寸精度提高。     

活性酯硬化水玻璃砂的研究

用焙烧活性砂混制而成的活性酯硬化水玻璃砂与普通酯硬化水玻璃砂相比，强度成倍提高，从而减少水玻璃的加入量，改善水玻璃砂的溃散性。实验证明：原砂的表面活性直接影响在水玻璃砂中水玻璃的加入量，是改善水玻璃砂溃散性的关键之一。焙烧活性砂的水玻璃加入量只要１．５％～２．０％，即能满足实际生产的强度要求。     

硅酸盐色谱分离中性氨基酸性能研究

将硅酸钠与硫酸铜或硫酸锌按等体积混合 ,制得新型无机离子交换剂硅酸铜、硅酸锌 ,分别用其作为色谱载体对中性氨基酸 (甘氨酸 ,丙氨酸 )进行分离 ,与强酸性阳离子交换树脂 0 0 1× 7的色谱行为作了比较。结果表明 ,合成的硅酸盐具有较好的分离性能。通过不同载体分离中性氨基酸 (甘氨酸 ,丙氨酸 )的流出体积的比较 ,硅酸铜的流出体积大于硅酸锌 ,硅酸锌的流出体积大于 0 0 1× 7。结果显示 ,硅酸铜比硅酸锌更适合于分离中性氨基酸 ,具有最好的分离特性