脉搏波形采集与辅助诊断系统的设计

在分析现有脉搏信号测量技术及其处理方法的基础上，设计了以AT89S52单片机为下位机，PC机为上位机的脉搏信号采集装置。利用Delphi强大的数据库支持特性和Delphi与Matlab混合编程技术，开发了脉搏信号辅助诊断系统。该系统界面友好，操作简单，数据处理能力强，实现了脉搏信号的采集，脉搏波形的实时显示、回放等功能。通过对临床患者脉搏数据的实际采集和处理，验证了该系统的有效性和实用性。     

A quantitative analysis of valgus torque on the ACL: a human cadaveric study.

The loads needed to elicit a positive pivot shift test in a knee with an anterior cruciate ligament (ACL) rupture have not been quantified. The coupled anterior tibial translation (ATT), coupled internal tibial rotation (ITR), and the in situ force in the ACL in response to a valgus torque, an inherent component of the pivot shift test, were measured in 10 human cadaveric knee specimens. Using a robotic/universal force-moment sensor testing system, valgus torques ranging from 0.0 to 10.0 Nm were applied in nine increments on the intact and ACL-deficient knee in flexion ranging from 0 degrees to 90 degrees. At 15 degrees of knee flexion, the coupled ATT and ITR were significantly increased in the ACL-deficient knee when compared to the intact knee. Coupled ATT increased a maximum of 291% (6.7 mm, p<0.05), while coupled ITR increased a maximum of 85% (5.1 degrees, p<0.05). At 30 degrees, the increases in coupled ATT and ITR were significant at valgus loads of 3.3 Nm and greater with a maximum increase in coupled ATT of 137% (6.3 mm, p<0.05) and a maximum increase in coupled ITR of 38% (3.6 degrees, p<0.05). At 45 degrees, coupled ATT increased significantly (maximum of 69%, 4.4 mm, p<0.05), but only at torques > or =6.7 Nm. The in situ force in the ACL was less than 20 N for all flexion angles when a torque between 3.3 and 5.0 Nm was applied. Low valgus torque elicited tibial subluxation in the ACL-deficient knee with low in situ ACL forces, similar to a positive pivot shift test. Thus, application of a valgus torque may be suitable to evaluate ACL-deficient and ACL-reconstructed knees, since subluxation can be achieved with minimal harm to the ACL graft. This work is important in understanding one load component needed for the pivot shift examination; further studies quantifying other load components are essential for better comprehension of the in vivo pivot shift examination.     

A New Acceleration Driven Pacemaker: Rate Modulation Versus Normal Sinus Rhythm—Comparison During Treadmill Exercise

The pocing rate response of a new acceleration driven pulse generator (SWING 100, SORIN BIOMEDICA) was compared with simultaneous normal sinus rhythm (NSR) during two different treadmill exercises. This pacemaker has a gravitational acceleration sensor able to discriminate between physical activities and vibrations. Six healthy volunteers (three male, three female; aged 21.7 ± 4,3 years), with the pacemaker strapped to their right infraclavicular area, performed each test three times with different rise response curve (RRC) each time: fast, normal, and slow. The fall response curve used was the same as the rising one during each test. Pacing rates were recorded using the VEGA analyzer (SORIN BIOMEDICA) and compared with simultaneous NSR recorded by a 7-channel ECG recorder (MINGOGRAF 7, SIEMENS), During all tests immediate (within seconds) rapid increase in pacemaker rate was seen up to about 60 seconds, then a slower increase followed thereafter. The mean correlation between pacing rates and NSR during the Bruce tests were 0.7941 ± 0.10, 0.8562 ± 0.14, and 0.8292 ± 0.07; during the discontinous tests 0.7292 ± 0.16, 0.7233 ± 0.10, and 0.7480 ± 0.11 for fast, normal, and slow RRC, respectively. Each 30 seconds, nonsignificant differences were present between pacing rate and NSR during all the discontinuous tests; similar responses were observed only during the first two stages of Bruce tests after which NSR was significantly higher than pacemaker rates. The speed of rise to upper rate was the main difference between the different programs (fast, normal, and slow). The discontinuous tests showed that the pacemaker responds more to speed than to grade. In conclusion, the Swing pacemaker is easy to use and program, fast, reliable, and is able to mimic the normal sinus behavior especially during discontinuous activities.     

基于人工嗅觉的呈香物质识别方法

研究了人工嗅觉在物质识别中的应用，概述了使用模式识别辨别物质气味的基本原理，详细介绍了人工嗅觉系统的硬件设计，算法和软件实现方法，最后使用本系统对不同香气物质进行了识别，取得了较好的结果。     

The Oxford Optical Pointer: a direction-sensing device with proportional electrical output

For some disabled people pointing provides a more convenient means of communication and control than the use of switches. The quadriplegic who retains good control of head movement can be provided with a number of input alternatives, but no existing system meets all the requirements of a general-purpose electronic pointing device. Consequently the Oxford Optical Pointer has been developed. The principle by which it converts relative direction into analogue electrical signals is described and its application as a head-mounted device for controlling an electric wheelchair is presented.     

热疗与放疗并用治疗体表恶性肿瘤的初步探讨

本文对12例体表恶性肿瘤病人采用放射治疗与微波加热治疗并用的方法取得了较好的效果,总有效率100%。     

Continuous In-Line Monitoring of Oxygen Delivery to Control Artificial Heart Output

In order to evaluate the pump output control based on the oxygen delivery to peripheral tissues, arterial and mixed venous hemoglobin content ([Hb]) and oxygen saturation (SO2) were continuously monitored in three biventricular bypass animals (3-, 6-, and 40-day experiments) with fibrillating ventricles. The specially developed oxygen sensors were mounted in the outflow ports of the artificial hearts to measure [Hb] and SO2. One animal was exercised on the treadmill at 2.0 mile/h for 15 min with pump flows fixed to deliver oxygen of (a) above 13 cc/min/kg, (b) 10, and (c) 9. In (a), the mixed venous saturation (SvO2) dropped to approximately 25% with no increase in the blood lactate level. In (b) and (c), the SvO2 decreased to approximately 10-15% with increase in blood lactate levels from 4 to 10-30 mg/dl. Also, the recovery of the SvO2 in these groups following the termination of the exercise was slower in comparison to (a). The lower limit of the SvO2 level that would create oxygen debt situation in the peripheral tissues was approximately 25-30% for the exercise of 2.0 mile/h. The SvO2 reflects changes in respiratory status, pump output, hemoglobin level, and metabolism, and is thus a useful indicator to diagnose quickly the circulatory status as well as possibly to control the artificial heart output.     

Conductance properties and voltage dependence of an anion channel in amphibian skeletal muscle

Single anion-selective channels were studied in excised membrane patches of adult frog toe muscle. The conductance and the probabilityp _o of the main open state were determined for various ionic compositions of the extra-and intracellular solutions. =280 pS in symmetrical 110 mM NaCl, pH 7.4 solutions at 15°C. Higher values were found at elevated internal or external NaCl concentrations, in 70 mM external CaCl₂ and at lower extracellular pH. Thep _o(E) curve declined steeply with hyperpolarization and was shifted towards more negative potentials at increased internal ionic strength and at higher external pH. Positive shifts were induced by extracellular Ca. The results show that the anion channel saturates at Cl concentrations >110 mM, that the potential profile of an open channel is almost symmetrical and that channel gating is affected by neighboring channels. It is suggested that the anion channel has a voltage sensor (effective gating charge 4.3) and a similar collection of local fixed charges on the extra- and intracellular sides as voltage-gated cation channels.     

智能化穴位温度检测仪的研制及实验研究

在经络穴位的生物物理属性中，由于皮肤温度比较灵敏，易于观察，又能及时反映该处血管的舒缩变化。作者利用铂电阻作为测温控头，用微机进行数据处理，并利用该系统进行人体皮肤温度的检测及分析。结果表明：皮肤温差点基本上是循经分布的。     

Repeatability of measuring knee flexion angles with wearable inertial sensors

Background

As assessment with inertial-measurement-units (IMUs) increases in research and in clinics, it is important to be aware of the repeatability of these sensors. The objectives of this experiment were to evaluate the measurement repeatability of IMU joint angles using a repeatable robot controller and an anthropomorphic leg phantom and to determine effects of joint speed and sensor positioning on the angles collected by these sensors. Comparisons to an electro-goniometer and three-dimensional (3D) motion capture cameras were also completed.