Lattice Effects and Irreversible Magnetoresistance in Gd Doped La—Ca—Mn—O

The Gd substituting effects for La in La0.67Ca0.33MnO3 has been studied .With increasing the substituting amount of Gd,the phase transition temperature of metal-isolator for the samples decreases,the corresponding peak resistivity increases,the Curie temperature decreases monotonically.The substitution of La-Ca-Mn-O with 11% Gd for La improved the magnetoresistance ratio by an order of magnitude.The effects of substituting Gd can be explained in terms of the lattice effects.An irreversible MR behaviour was observed in Gd-substituting compounds.This effect became marked when the substituting amount of Gd was greater than 7%.A maximum irreversible increment of MR ratio as large as 91% was obtained when Gd substituting amount was 11%.     

dc Electrical Degradation of Perovskite-Type Titanates: I, Ceramics

The rate of the resistance degradation of doped SrTiO₃ ceramics is investigated as a function of various external and material parameters. The effects of the mutually interrelated parameters dc voltage, dc electric field, and thickness of the dielectric are described by power laws. Electron microscopic potential contrast studies show a Maxwell-Wagner polarization leading to a concentration of the electric field at the grain boundaries during the degradation. Based on this finding, the voltage step per grain boundary, ΔΘ_gb, is introduced as a rate-determining parameter which allows an explanation of the influence of the grain size on the degradation rate as well as the difference in the power laws for ceramic and single-crystal samples.     

Oxidative coupling of methane over LaCoO3−δ-based mixed oxides

The catalytic activity of LaCoO_3–-based mixed oxides for the oxidative coupling of methane has been tested by TPR and cyclic reaction. Characterization has been done by XRD, TGA and Mössbauer spectrometry. It is likely that the perovskite-crystal structure containing hypervalent metal ions has an important role and that unique structural oxygen species in the perovskite contribute to the partial oxidation of methane.     

Decomposition of nitric oxide over perovskite oxide catalysts: effect of CO2, H2O and CH4

Direct nitric oxide decomposition over perovskites is fairly slow and complex, its mechanism changing dramatically with temperature. Previous kinetic study for three representative compositions (La_0.87Sr_0.13Mn_0.2Ni_0.8O_3−δ, La_0.66Sr_0.34Ni_0.3Co_0.7O_3−δ and La_0.8Sr_0.2Cu_0.15Fe_0.85O_3−δ) has shown that depending on the temperature range, the inhibition effect of oxygen either increases or decreases with temperature. This paper deals with the effect of CO₂, H₂O and CH₄ on the nitric oxide decomposition over the same perovskites studied at a steady-state in a plug-flow reactor with 1 g catalyst and total flowrates of 50 or 100 ml/min of 2 or 5% NO. The effect of carbon dioxide (0.5–10%) was evaluated between 873 and 923 K, whereas that of H₂O vapor (1.6 or 2.5%) from 723 to 923 K. Both CO₂ and H₂O inhibit the NO decomposition, but inhibition by CO₂ is considerably stronger. For all three catalysts, these effects increase with temperature. Kinetic parameters for the inhibiting effects of CO₂ and H₂O over the three perovskites were determined. Addition of methane to the feed (NO/CH₄=4) increases conversion of NO to N₂ about two to four times, depending on the initial NO concentration and on temperature. This, however, is still much too low for practical applications. Furthermore, the rates of methane oxidation by nitric oxide over perovskites are substantially slower than those of methane oxidation by oxygen. Thus, perovskites do not seem to be suitable for catalytic selective NO reduction with methane.     

Ammoxidation of toluene over Y-Ba-Cu-Co-O perovskites

Ammoxidation of toluene over the perovskites YBa₂Cu₃O_6.1, YBa₂Cu₂CoO_6.7 and YBaCuCoO_4.9 was investigated at 400 °C. At low partial pressures of O₂ benzonitrile was selectively formed, while CO₂ was the main product at high pressures of O₂. Systematic differences in activity were observed for the three phases and are related to the crystal contents of Cu and Co. At low O₂ pressures, Cu-sites are active for nitrile formation, while Co-sites give CO₂. At high O₂ pressures, the activity for CO₂ of Cu-sites increases more than that of Co-sites due to filling of near-surface oxygen vacancies.     

Crystal Structure and Microwave dielectric Properties of Ba(Zn1/3Ta2/3)O3–(Sr,Ba)(Ga1/2Ta1/2)O3 Ceramics

The microwave dielectric properties and crystal structure of Ba(Zn_1/3Ta_2/3)O₃– (Sr,Ba)(Ga_1/2Ta_1/2)O₃ ceramics were investigated in the present study. The Q value of Ba(Zn_1/3Ta_2/3)O₃ was improved by adding 5 mol% Sr(Ga_1/2Ta_1/2)O₃. The maximum Q value of Q × f = 162000 GHz was obtained at 0.95Ba(Zn_1/3Ta_2/3)O₃. 0.05Sr(Ga_1/2Ta_1/2)O₃. For this composition, a lattice super structure caused by hexagonal ordering was observed. A further improvement in the Q value was attained when some Sr was replaced with Ba, and 0.95Ba(Zn_1/3Ta_2/3)O₃· 0.05(Sr_0.25Ba_0.75)(Ga_1/2Ta_1/2)O₃ exhibited a maximum Q value such that Q × f = 210000 GHz. Despite the increased Q value with the replacement of Sr by Ba, the c/a value, which indicates the degree of lattice distortion, remained constant near 3/2. The Q value thus improved without lattice distortion in the system Ba(Zn_1/3Ta_2/3)O₃-(Sr,Ba)(Ga_1/2Ta_1/2)O₃, whereas the improvement of Q value increased with lattice distortion in the solid solution system with Ba(Zn_1/3Ta_2/3)O₃ as an end member.     

Control 5.0: From Newton to Merton in Popper's Cyber-Social-Physical Spaces

The future of control in cyberspace of parallel worlds is discussed. It argues for the coming age of Control 5.0, the control technology for the new IT capable of dealing with artificial worlds with VR, AR, AI and robotics. The discipline of automation needs a new interpretation of its core knowledge and skill set of modeling, analysis, and control for cyber-socialphysical systems, and a paradigm shift from Newtonian Systems with Newton's Laws or Big Laws with Small Data to Mertonian Systems with Merton's Laws or Small Laws with Big Data.      

Coherent Phonon-Induced Modulation of Charge Transfer in 2D Hybrid Perovskites

Electron–phonon interactions play an essential role in charge transport and transfer processes in semiconductors. For most structures, tailoring electron–phonon interactions for specific functionality remains elusive. Here, it is shown that, in hybrid perovskites, coherent phonon modes can be used to manipulate charge transfer. In the 2D double perovskite, (AE2T)₂AgBiI₈ (AE2T: 5,5“-diylbis(amino-ethyl)-(2,2”-(2)thiophene)), the valence band maximum derived from the [Ag_0.5Bi_0.5I₄]^2– framework lies in close proximity to the AE2T-derived HOMO level, thereby forming a type-II heterostructure. During transient absorption spectroscopy, pulsed excitation creates sustained coherent phonon modes, which periodically modulate the associated electronic levels. Thus, the energy offset at the organic–inorganic interface also oscillates periodically, providing a unique opportunity for modulation of interfacial charge transfer. Density-functional theory corroborates the mechanism and identifies specific phonon modes as likely drivers of the coherent charge transfer. These observations are a striking example of how electron–phonon interactions can be used to manipulate fundamentally important charge and energy transfer processes in hybrid perovskites.     

Functional 2D Phases in Mixed Dimensional Perovskite Photovoltaics

Organic-inorganic hybrid perovskite solar cells (PSCs) with unique properties exhibit their powerful competitiveness in the photovoltaic field over the past few years. However, the challenges of stability for perovskite devices limit the commercialization and further development. The 2D/3D hybrid structures combine the superior efficiency of bulk perovskites and the superior stability of layered perovskites and gradually get hotspots of the photovoltaic field. In addition, there remains a lack of comprehensive understanding and systematic summary of the function of 2D perovskite attributed to the complex nature of 2D/3D structures. Here, the latest progress of 2D/3D hybrid structures and focus on the functionality of 2D phases in mixed structures and the underlying mechanism from the perspective of their different distributions in the perovskite layer is summarized. Then, the insight and vital factors for overall improvements in the stability of 2D/3D structures are thoroughly discussed. Finally, it is expected that this review will contribute to the present challenges and future research prospects in the photovoltaic industry.