相干源二维波达方向估计

本文分析了平面阵接收信号的协方差矩阵，发现它可分解为一个广义对称矩阵与一个非广义对称矩阵之和，利用信号协方差矩阵的这一结构特征，重点研究了相干源二维波达方向（DOA）估计．该方法通过构造一个差矩阵，求出其本特征值对应的任一特征向量，利用谱函数估计相干源二维DOA．简要分析了二维DOA估计的分维处理。     

Driver detection and recognition of lineside signals and signs at different approach speeds

A study was carried out using simulation to investigate driver responses to lineside signals and signs at various approach speeds. The objectives of the study were: (1) to find out whether train speed would significantly affect signal/sign reading; (2) to examine at which point certain types of signs or signals could be detected or recognised, and (3) to determine a speed cut-off level above which certain types of signs or signals are no longer recognisable or detectable. Fifty-seven train drivers from 12 Train Operating Companies in the UK participated in the trials. Twenty different types of lineside signs and ten types of signals were tested under six different approach speeds ranging from 100 to 350 km/h (62–218 mph). Driver performance measures were ‘time remaining to the signal/sign’ at the point of detection or recognition, and reading error rate. The results showed a significant influence of train speed on driver responses to lineside signals/signs and demonstrated a non-linear relationship between driver responses to signals/signs and approach speed. This has been used to estimate a maximum approach speed limit within which a specific signal or sign can be correctly detected or recognised. The findings and implications of the study are discussed in the paper.     

Creep of PVDF monofilament sutures: service performance prediction from short-term tests

Isothermal short-term creep of poly (vinylidene fluoride) (PVDF) monofilament sutures was determined at several temperatures between 10 and 90 °C under the stress of 10 MPa. Long term service performance was predicted for 10 decades of time. The compliance master curve as a function of time fits a hyperbolic sine equation. The temperature shift factor as a function of the temperature a_T (T) is accurately represented by a general equation based on free volume. A simple relationship between the two parameters of the equation is explored. The viscoelasticity of PVDF is also seen in dynamic mechanical analysis performed at the frequency of 1 Hz. The origin of the viscoelastic character well present in the deformability of the PVDF in service is due to the occurrence of the α_c relaxation that is active at ∼50 °C (E″ peak at 1 Hz).     

A study on microstructure and properties of calcium phosphate coatings processed using ion beam assisted deposition on heated substrates

In this study a set of thin Hydroxyapatite (HA) [Ca₁₀(PO₄)₆(OH)₂] coatings was deposited on heated silicon and titanium substrates using Ion Beam Assisted Deposition (IBAD). The effects of substrate temperature and processing parameters on the microstructural properties and composition of the coatings are being studied. Analytical techniques include transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM) with an energy dispersive X-ray spectroscopy (EDS), as well as scanning electron microscopy (SEM) with EDX, X-ray diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR). The current results indicate that as substrate temperature increases the Ca/P ratio of the coatings both on titanium and silicon substrates increases. The crystallinity of the coatings and the number of calcium phosphate compounds within the coating including HA also increases. STEM-EDS revealed an atomically diffused intermediate layer at the interface between the coating and substrate. XRD results along with TEM selected area diffraction (SAD) revealed that the coatings are composed of HA, other calcium phosphate, and calcium oxide compounds.     

Multifunctional hydrogels that promote osteogenic hMSC differentiation through stimulation and sequestering of BMP2

The extracellular environment controls many cellular activities thereby linking external material cues to internal cell function. By better understanding these processes, synthetic extracellular material niches can be tailored to present cells with highly regulated physical and/or chemical cues that promote or suppress selected cell functions. Here, poly(ethylene glycol) (PEG) hydrogels were functionalized with fluvastatin-releasing grafts and growth factor binding heparin domains to enable the dynamic exchange of information between the material and cells from the outside-in and inside-out (i.e., bidirectional signaling). By incorporating a fluvastatin-releasing graft and carefully controlling the dose and temporal release, materials were designed to promote bone morphogenic protein (BMP2) and alkaline phosphatase (ALP) production by human mesenchymal stem cells (hMSCs). When the release of fluvastatin was controlled to occur over 2 weeks, BMP2 and ALP production was increased 2.2-fold and 1.7-fold, respectively, at day 28 compared to hMSCs cultured in the absence of fluvastatin. By introducing a heparin functionality into the gel to sequester and localize the hMSC-produced BMP2, the osteogenic differentiation of hMSCs was further augmented over fluvastatin delivery alone. Osteopontin and core binding factor α1 gene expression was 6-fold and 4-fold greater for hMSCs exposed to fluvastatin in the presence of the heparin functionalities, respectively. These results demonstrate how multifunctional gels that interact with cells in a bidirectional manner can efficiently promote selected cell functions, such as the osteogenic differentiation of hMSCs.     

Measurement accuracy enhancements for wideband modulated signals

Time‐domain waveform measurements of wideband modulated signals, although attractive for communication systems modeling applications, have until now lacked the required accuracy for quantitative analysis. New developments described here enhance the accuracy of these measurements, enabling their application to communication system characterization and modeling. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 13: 32–39, 2003.     

基于Shannon熵的飞机交流发电机振动分析

飞机交流发电机是飞机关键部件之一,监测其健康状况具有重要意义。通过设计实验数据获取平台采集交流发电机在转速上升(从6000转/分到8500转/分)、平稳运行(7500转/分)及转速下降(8500转/分到6000转/分)三个阶段的振动信号,利用符号序列Shannon熵的计算方法以及符号化方法设定合适参数对振动信号进行了处理,得出了交流发电机在三个阶段的振动信号的Shannon熵;通过初步的分析表明,交流发电机在正常状态下三个阶段的Shannon熵都比较有规律的在一定范围内变化,一旦发生振动异常将会引起Shannon熵突变;经过分析讨论,Shannon熵的突变与否是可以用来反映交流发电机在机械方面是否存在故障隐患的。