Incisional healing in rats treated with diethyl maleate

Diethyl maleate (DEM) which binds and thus depletes tissue glutathione levels was used to aggravate the injury and to determine its effect on incisional healing. A 5 cm dorsal midline skin incision was performed on 40 albino Wistar rats in two groups and then closed by interrupted sutures. Groups received 0.9% NaCl and DEM at a dosage of 1 mg/kg/day intraperitoneally for seven days, respectively. On postoperative days 7 and 14, histopathological assessment and tensile strengths were measured. The DEM treated group had a marked inflammation with poorly defined collagen formation and the tensile strength measurements revealed a significant decrease (p <0.001) on the 7t day. On the other hand, the first group showed better collagenization and a lesser degree of inflammation. However, on the 14th day, there was no noticeable histopathological difference between the two groups; but, tensile strength values of the second group were still lower (p <0.05). In this animal model, DEM postponed the healing process and reduced the tensile strength.     

试论新世纪初期医院综合院力评价

作者阐述了医院综合院力的内涵与提出背景，提出了新世纪初期综合院力的评价内容体系，即一级评价内容7项，二级评价内容39项，三级评价内容15l项，并就各指标评价内容进行了讨论分析。     

N—酰化壳聚糖膜性能的研究

讨论了一系列N-酰化壳聚糖膜的抗张强度、透水性、VB_(12)的透过性、透氧性以及血液相容性。N-已酰化壳聚糖膜具有良好的血液相容性。在制膜过程中,加入分子量为1500的聚乙二醇为致孔剂,则可使N-己酰化壳聚糖膜的渗透性有较大提高。同时保持较好的血液相容性和强度。     

Effects of Clodronate on Cortical and Trabecular Bone in Ovariectomized Rats on a Low Calcium Diet

The aim of this study was to evaluate the contribution of a low calcium diet to the cortical and trabecular osteoporosis seen in ovariectomized rats after 7 weeks on a low calcium diet and to investigate the effects of the bisphosphonate clodronate on this development of osteoporosis. Thirty-six mature, female Wistar rats were randomized into four groups: Ovx−B (bisphosphonate) and Ovx−C (control) were ovariectomized, and Sham−Ca (low calcium) and Sham+Ca (normal calcium) were sham operated. The first three groups were fed a low calcium diet (0.01%) and Sham+Ca normal rat chow (Ca 1.1%). The Ovx−B received 10 mg/kg s.c. clodronate daily for nine weeks, and Ovx−C, Sham−Ca, and Sham+Ca received the same volumes of saline. Bone mineral turnover measured as ⁸⁵Sr-uptake was increased in all low calcium groups compared to Sham+Ca. The Sham+Ca femora had higher dry weight and ash weight than the other groups, and Ovx−C had higher dry weight compared with Ovx−B and Sham−Ca. Calcium content was lower in both Ovx groups compared to both Sham groups. Magnesium was lower in all groups compared to Sham+Ca and higher in Ovx−B compared with Ovx−C. In the femoral shaft, Sham+Ca had significantly higher ultimate bending moment, energy absorption, and deflection compared to the other three groups. Ultimate bending moment was higher in Sham−Ca than in Ovx−C. Stiffness was increased in both Sham+Ca and Ovx−B compared to Ovx−C. The maximum stress in the femoral midshaft was higher in Sham+Ca than in the other groups, and higher in Ovx−B than in Ovx−C. Histomorphometry showed increased medullary area in all low calcium groups compared to Sham+Ca and larger cortical area in Sham+Ca and Ovx−B compared to Ovx−C. Compared to Sham+Ca the trabecular bone volume was decreased to 30% in Sham−Ca and to 9% in Ovx−C, but was unchanged in Ovx−B. The low calcium diet generally increased bone mineral turnover and reduced the tibial bone volume. Femoral changes led to a reduction of cortical fracture strength and maximal stress. Ovariectomy in addition to a low calcium diet reduced femoral strength even more. Daily injections of clodronate to ovariectomized rats on a low calcium diet increased femoral shaft stiffness and maximum stress, and clodronate preserved both trabecular and cortical tibial bone volume completely. Received: 11 June 1996 / Accepted: 5 March 1997     

Arm function after axillary dissection for breast cancer: a pilot study to provide parameter estimates.

Sixty-three women participated in a study in Calgary, Alberta to assess the rate of arm recovery and factors affecting it up to one year after axillary node dissection for breast cancer. Outcomes included objective measures of swelling, mobility, and strength, and subjective assessments of pain (at rest and with movement) and stiffness. Approximately 42% of women had residual impairment of at least one type one year after surgery, the most common problems being pain (16%) and reduced grip strength (16%). Except for lymphedema, measurements one year after surgery showed little change from measurements at 6 months, suggesting that the shorter follow-up may be appropriate for assessing the long term effects of axillary dissection. Lymphedema was the only sequela which increased over time. The results provide parameter estimates for designing studies to evaluate the role of physiotherapy after axillary dissection.     

Similarities in Skeletal Muscle Strength and Exercise Capacity Between Renal Transplant and Hemodialysis Patients

Exercise intolerance is common in hemodialysis (HD) and renal transplant (RTx) patients. Aim of the study was to assess to what extent exercise capacity and skeletal muscle strength of RTx patients differ from HD patients and healthy controls and to elucidate potential determinants of exercise capacity in RTx patients. Exercise capacity, muscle strength, lean body mass (LBM) and physical activity level (PAL) were measured by cycle-ergometry, isokinetic dynamometry, DEXA and Baecke Questionnaire, respectively, in 35 RTx, 16 HD and 21 controls. VO2peak and muscle strength of the RTx patients were significantly lower compared to controls (p<0.01), but not different compared to HD patients. In RTx patients, strength (p<0.001), PAL (p=0.001) and age (p=0.045) were significant predictors of VO2peak. Muscle strength was related to LBM (p=0.001) and age (p=0.001), whereas gender (p<0.001) and renal function (p=0.01) turned out to be significant predictors of LBM. No effects of corticosteroids were observed. Exercise capacity and muscle strength seem equally reduced in RTx and HD patients compared to controls. In RTx patients, muscle strength and PAL are highly related to exercise capacity. Renal function appears to be a significant predictor of LBM, and through the LBM, of muscle strength and exercise capacity.     

含钛合金及Ni-Cr合金与瓷粉结合强度的实验研究

目的:研究含钛合金(4%～6%)[熔附HeraCeramJC瓷粉(A1组)和Vita瓷粉(A2组)]、HeraCeram公司的Ni-Cr合金[熔附HeraCeramJC瓷粉(B1组)和Vita瓷粉(B2组)]及西北有色金属厂的Ni-Cr合金[熔附HeraCeramJC瓷粉(C1组)和Vita瓷粉(C2组)]的金-瓷结合强度,为临床工作提供参考。方法:运用三点弯曲法对各组的金-瓷结合强度进行测试,并对金-瓷结合界面进行电镜观察分析。结果:电镜显示各组瓷粉均与金属基体结合紧密,无明显气泡、中间层等缺陷。结合强度:A1组:(41.08±2.98)MPa,B1组:(46.05±3.16)MPa,C1组:(44.04±3.69)Mpa;A2组:(42.29±3.38)MPa,B2组:(42.05±3.26)MPa,C2组:(47.47±2.92)MPa。①HeraCeramJC瓷粉与3种合金结合的结合强度比较:B1>A1(P<0.05);B1>C1、C1>A1(P>0.05)。②Vita瓷粉与3种合金结合的结合强度比较:C2>A2、C2>B2(P<0.05);A2>B2(P>0.05)。结论:本实验表明临床常用的3种非贵合金与瓷粉的金-瓷结合强度均大于ISO所要求的基本值25MPa,但各组间还存在一定差异,为临床工作中根据患者的具体情况选择合适的烤瓷修复基底材料和瓷粉提供实验依据。     

Force-time parameters during explosive isometric grip correlate with muscle power

Although explosive isometric contraction provides little work toward the outside, force-time parameters of the rising phase of the force-time curve may be able to predict muscle power. The purpose of this study was to examine the relationship between muscle power with work (power grip) and force-time parameters during the rising phase in explosive isometric grip. Fifteen healthy young adult males participated in this study. Power grip was measured using loads of 20%–50% of maximal voluntary contraction (MVC) (peak isometric force). Subjects pulled explosively on a grip bar held with the second digital joints without the thumb. Peak power was calculated from peak velocity and load. Explosive isometric grip was measured using a hand dynamometer. Time-series data of both tests were sampled by an analog-to-digital interface. Both tests were performed with the subjects seated with a sagittal and horizontal position of the arm supported by an armrest. Peak power in the power grip test tended to be larger with an increase of the load, but there was no significant difference between 40% and 50% MVC. Only the peak power in 50% MVC significantly correlated with peak grip force (r=0.52, p<0.05). The force-time parameters related to the peak rate of the rising force phase in explosive isometric grip significantly correlated with the peak powers (30%–50% MVC, r=|0.58−0.78|). Peak rate of the rising force phase in explosive isometric grip may be useful for predicting muscle power with loads between 30%–50% MVC.     

The influence of support conditions in the loading fixture on failure mechanisms in the push-out test: a finite element study

The usefulness of the push-out test as an indicator of interface strength was evaluated using finite element models of intact and partially failed cylindrical push-out specimens loaded against a rigid annular support. The irregular stress distributions that were found in intact specimens depended more on interface conditions at the loading fixture than on a 35% increase in interface area. The maximum stress at the interface was a tensile stress. Critical energy release rates for interface failure were calculated for flawed specimens in which flaw size was either 10 or 100 microns, and for boundary conditions at the loading fixture that were either fixed or slipping in the radial direction. The critical energy release rates depended heavily on the support boundary conditions. Thus, the results of parametric push-out tests can be reasonably compared only for specimens that are very similar in geometry and that are loaded in very carefully controlled fixtures.     

Ex vivo estimation of thoracolumbar vertebral body compressive strength: The relative contributions of bone densitometry and vertebral morphometry

The estimation of vertebral fracture risk in individuals with suspected osteopenia is commonly based on measurements of lumbar spine bone density. The efficacy of vertebral size and deformity, as assessed by vertebral morphometry, in the prediction of fractures has been less studied. In an ex vivo investigation the regional relationships between vertebral size, vertebral deformity, bone density and compressive strength throughout the thoracolumbar spine were examined. In 16 vertebral columns (T1–L5) the bone mineral content (BMC) and bone mineral density (BMD) of each segment were measured using lateral projection dual-energy X-ray absorptiometry, and the vertebral cancellous density (VCD) and mid-vertebral cross-sectional area (CSA) measured using quantitative computed tomography. Vertebral body heights were determined from mid-sagittal CT scans, and vertical height ratios calculated for each segment. The failure load and failure stress of the isolated vertebral bodies were determined using a material testing device. Separate analyses were performed for the upper (T1–4), middle (T5–8) and lower (T9–12) thoracic, and lumbar (L1–5) segments. In all regions, failure load was strongly correlated with BMD (r=0.82–0.86), moderately correlated with VCD (r=0.60–0.71) and vertebral height (r=0.22–0.49), and poorly correlated with the height ratios (r=0.04–0.33). Failure stress was best predicted by BMD (r=0.73–0.78) and VCD (r=0.70–0.78) but was poorly correlated with all morphometric variables (r=0.01–0.33). The segmental correlations between BMD and VCD ranged fromr=0.49 tor=0.79. For all regions, BMD and VCD were included in the stepwise regression models for predicting failure load and failure stress. Either the mid-vertebral height or CSA were included in all the failure load models, while mid-vertebral height was included in only one of the failure stress models. The results suggest that vertebral deformity and size (as assessed by vertebral morphometry) make only a minor contribution to the prediction of vertebral strength additional to that provided by bone densitometry alone. The consistent regional relationships between variables appear to support the practice of global fracture risk assessment based on lumbar spine densitometry.