可控震源施工中电台数据传输不良的原因分析及排除

可控震源在施工中,常常出现各种电台干扰,导致震源数据传输不正常或震源收不到仪器发出的遥控启动信号,影响正常施工.本文介绍了各种电台干扰引起的故障现象,分析了故障产生的原因,给出了故障的排除方法.     

单光纤传输光推动便携式压力测量仪的研究

介绍了用单根光纤传输测量信号和功率信号的光功率推动液体压力测量仪及其工作原理。该仪器以电容式压力传感器的δ元件作为压力检测元件，采用低功耗前置器电路和简单直杆结构，实现了便携式测量。测量范围为O～100kPa，精度为O．01kPa。     

白钨矿浮选731捕收剂低温乳化试验研究

介绍了731捕收剂在低温条件下试验的情况。试验研究结果表明，采用A和B药剂以5：6的比例混合组成的复合乳化剂对731进行乳化，低温时乳化体系稳定性好，浮选过程中降低乳化731的用量，同时提高了选择性，降低了浮选成本，实现了低温环境下白钨矿正常浮选作业，达到选矿技术攻关指标。     

MON--未来城域网的发展方向

阐述了城域光网络(MON)技术的出现背景、定义、技术方案和特点，以及与现有城域基础设施的比较，突出说明了其应用上的竞争优势。最后介绍了MON的现状和前景展望。     

Stabilization of fixed modes in expansions of LTI systems

The objective of this note is to propose a method for stabilization of structurally fixed modes in expansions of LTI dynamic systems in the scope of overlapping decentralized control design based on the expansion/contraction framework, enabling successful design for a broader class of problems than considered so far. The method is based on a judicious choice of complementary matrices in the expanded space. Numerical examples are provided to illustrate simplicity and efficiency of the proposed approach.     

WKB近似下的Fourier衍射成象方法

对于介质目标微波衍射成象，本文引入了ＷＫＢ近似来模拟目标内部总场。基于这种近似，我们导出了Ｆｏｕｒｉｅｒ衍射公式，并采用了广义滤波逆传播方法由目标空间谱实现目标特性的重建。计算机模拟结果表明采用ＷＫＢ近似重建目标特性较Ｂｏｒｎ近似有明显改善。     

低温粉碎系统中旋风分离器设计

旋风分离器是一种应用离心力进行粉体分离的设备。低温粉碎系统应用它分离粉体并起集粉作用。它的效率决定了物质回收率。本文从离心加速度与重力加速度的比值，筒体的高低，筒体直径，进口速度叙述对分离器效率的影响。着重叙述筒体直径确定方法，以及我们设计造长筒形旋风分离器的具体结构和令人满意的试验结果。     

太钢4号高炉喷煤站应用MFD—Ⅲ型布袋除尘器的实践

太钢４号高炉喷煤站从１９９０年起采用ＭＦＤ－Ⅲ型脉动反吹式布袋除尘器。这种除尘器采用脉动式反吹清灰设施，合理布置布袋间距，布袋支撑骨架及选用针呢材质的布袋，过滤面积大，反吹清灰效果好，设备运行平稳，除尘效率高达９９．８％，排放浓度小于１０ｍｇ／ｍ＾３，故障率低。     

Advanced modulation formats for more robust optical transmission systems

Interest in advanced modulation formats for optical communication systems has so far experienced two major waves. The first one was motivated by the potential to enhance receiver sensitivity of thermal noise-limited systems using coherent detection in combination with phase shift keying. It ended with the advent of optical amplification, enabling high sensitivities together with polarization insensitive, simple and stable direct detection. The second wave is still rolling, fueled by the potential of advanced modulation formats to increase robustness of optical transmission systems against signal distortions. Due to performance limitations given by direct detection and nonlinear effects in the transmission fiber, it is not decided yet, whether there will be widespread application in carrier networks.