基于IPv6的视频资源服务平台构建

介绍了基于IPv6视频资源服务平台的工作原理和关键技术,设计并开发了基于IPv6的视频资源服务平台,该平台能实现视频教学、影视娱乐、交流答疑、视频直播、视频点播等功能。     

虚拟机动态迁移方法

对虚拟机动态迁移方法的研究背景、研究意义以及研究现状进行综述,分别介绍了内存预拷贝迁移、内存后拷贝迁移、内存混合复制迁移和基于日志跟踪重现的迁移方法,对其算法思想、关键技术、实现机制以及性能等进行概括、分析和比较,并针对当前主流的预拷贝迁移的优化策略予以分类阐述。最后,对动态迁移方法有待深入的研究热点和发展趋势进行展望。     

翼缘刚接混凝土T梁桥结构体系损伤评价研究

以16 m跨径的T梁桥标准图为基础,按1:4的缩尺比例,采用焊接钢板的连接方法设计了一座5片T梁桥模型。通过不同的钢板连接方式,对横向连接损伤对翼缘刚接T桥梁桥承载能力的影响进行了试验和有限元分析,研究了不同损伤工况对翼缘刚接T梁桥荷载横向分配的影响。提出了活载横向分布调整系数,为现实中的T梁桥承载能力评估、加固提供定量的评判标准,为损伤状态下刚接梁桥的体系可靠性评估提供借鉴。     

侵入物高速撞击下铰链式动车组的安全性

为探究侵入物高速撞击下铰链式动车组的安全性,在实物三维扫描重构的基础上,构建一种新的活体三维有限元层叠模型,并在LS-DYNA中进行摆锤侧面碰撞分析验证;通过铰链式动车组与活体在110 km/h速度下的碰撞仿真计算,讨论动车组运行的安全性以及吸能装置的可靠性.结果 显示:活体的有限元层叠模型既能保证计算精度,又能提高计算效率;在110 km/h的碰撞速度下,车体加速度为0.117g,轮对抬升量为0.238 mm,车钩每5 m长度的压缩量最大约为1.89 mm.各项指标都低于EN 15227标准,动车组行车安全性没有受到影响,吸能装置也能可靠工作.     

内框架箱型混凝土结构施工活荷载实测分析

施工期早龄期钢筋混凝土结构与模板支撑系统组成临时承载体系为时变结构,其承担的荷载主要有新浇筑混凝土自重与包括施工人员和设备荷载以及混凝土浇筑时产生的冲击和振捣荷载在内的施工活荷载。将多层连续施工时变结构体系模拟成一组弹性支撑连续板,根据该模型分析了施工期现浇钢筋混凝土结构的受力特性。根据现场实测数据,以构件有效承载面积为统计对象,计算了混凝土施工荷载的统计参量,并参考相关研究成果,以95%的置信度对施工期活荷载标准值进行反演,建议施工活荷载标准值取2.5 kN/m 2。     

基于红外热成像的避雷器故障诊断

文章针对一起由红外热成像仪发现的氧化锌避雷器故障,利用在线监测、红外图谱分析、带电测试等多种检测手段对其进行诊断分析,通过不同检测结果的对比,最终确定避雷器故障发生的原因。不同检测手段的灵敏度差异,对电力设备维护有一定的指导意义。     

Assessment of Numerical Models for Live Load Distribution in a Road Slab Bridge

This paper presents comparison of numerical models used in an analysis of a road bridge deck. The models were adapted for computing the live load distribution coefficients in composite concrete bridge deck. The load distribution method was chosen for assessment of the usability of different numerical model in slab bridge deck analysis. The goal of the study is to determine a simplest but still accurate numerical model to estimate live load effects on composite slab bridge. In the analysis, the well-established grillage approach was adapted for representation of the bridge deck as a basic model as well as more sophisticated three-dimensional models which was supposed to better represent the real behavior of the deck under concentrated wheel loads. The bridge deck was effectively modeled using beam and shell elements. The grillage method compares well with the finite-element method. This finding is allowed to establish simplification in numerical modeling of slab bridge decks for live load effect computations.     

Optical complexities of living cytoplasm--implications for live cell imaging and photo-micromanipulation techniques

The ability to manipulate the intracellular environment within living cells and to monitor the cytosolic chemical changes which occur during cell stimulation has lead to major advances in our understanding of how cells read and respond to their environment. Perhaps the most powerful suite of techniques for achieving these dual objectives is based on the use of light (photons). Because cells are 'transparent', light has been used to both interrogate and manipulate the chemistry inside living cells, exploiting technical advances in both the physical and biochemical sciences. However, cells are neither transparent nor homogeneous with respect to their optical properties. The interface between light and the living cell cytoplasm thus represent an important, yet largely ignored, interface. There has been no review of the optical properties of cytoplasm and little discussion about how the optical properties of living cytoplasm influence the outcome of such measurements and manipulations. In this short review, we discuss the importance of understanding the optical properties of cytoplasm for such techniques and how imperfections in experimental interpretation can arise.     

基于等差划分的虚拟机实时迁移技术

研究了虚拟机的实时迁移。对局域网内存迁移的预拷贝算法、后拷贝算法以及由这两种算法构成的混合拷贝算法的特性进行分析,在改进混合拷贝算法的基础上提出了基于等差划分的虚拟机实时迁移技术,该技术把第一轮传输的内存页划分成近似等差数列形式的多段,以减少第二轮传输的内存页。不同工作负载条件下的试验表明,与混合内存拷贝方式相比,基于等差划分的虚拟机实时迁移技术平均减少了25%的同步内存位图时间,29%的后拷贝方式发送的内存页以及2.2%的总迁移时间,在一定程度上提高了混合内存拷贝方式的虚拟机实时迁移性能。     

一种基于动态迁移技术的寄存器保护方法

在强辐射环境中,寄存器会受到高能粒子冲击而发生位翻转导致寄存器内容发生变化,称这种现象为寄存器故障。对关键寄存器进行定义,提出一种寄存器保护模型,通过动态申请系统当前空闲的寄存器作为关键寄存器的备份,在运行过程中运用动态迁移技术对关键寄存器进行保护,使寄存器自身具有一定的容错能力。