Exit effect on hydrodynamics of the internal circulating fluidized bed riser

This is the first time an extensive investigation has been carried out regarding the effects of riser exit geometry on pressure drop and solid behaviour inside the Internal Circulating Fluidized Bed (ICFB) riser, using different riser exit geometries at several operating conditions.The Radioactive Particle-Tracking (RPT) technique was used for solid concentration measurements and solid residence time distribution at the exit zone. Experiments were conducted using Geldart B particles, in the gas superficial velocity range of 4 to 10 m/s. Axial solid hold-up, solid residence time distribution in the exit zone, and the reflux ratio factor k_m, (defined earlier by [E.H. Van der Meer, R.B. Thorpe, J.F. Davidson, Flow patterns in the square cross-section riser of a circulating fluidized bed and the effect of riser exit design, Chem. Eng. Sc. 55 (19) (2000) 4079-4099]), were the main criteria used to investigate the impact of gas-solid separator devices implemented at the ICFB riser exit.Solid residence time distribution results and axial solid hold-up profiles provided clear evidence that the separator device at the riser exit strongly influences the hydrodynamic structure of the ICFB riser. The V-shaped riser exit geometry was found to be the optimum of all the configurations studied.     

Ready, Set, Go! The Voronoi diagram of moving points that start from a line

It is an outstanding open problem of computational geometry to prove a near-quadratic upper bound on the number of combinatorial changes in the Voronoi diagram of points moving at a common constant speed along linear trajectories in the plane. In this note we observe that this quantity is Θ(n²) if the points start their movement from a common line.     

《周培德三角剖分不是最小权三角剖分》一文商榷——反例不成立

周培协三角剖分是否能得到最小权三角剖分，周培德在《周培德三角部分不是最小权三角剖分》一文撰写之前已有新的结论，本文还指出《周培德三角剖分不是最小权三角剖分》一文所举反例不成立。     

A generalized approach to the reconstruction of a restricted class of digitized planar curves

Reconstruction of an original continuous curve and the estimation of its parameters from the digitized version of the curve is a challenging problem, as quantization always causes some loss of information. In this paper, we have developed a scheme for reconstruction which is applicable to a class of curves having at the most two parameters. The class of curves for which the scheme works has also been characterized. We have shown that for one-parameter curves the exact domain of values of the parameter can be obtained. But in the two-parameter case, only the smallest rectangle containing the domain can be realised. The distinctive feature of our scheme is that it provides a unified approach to solve the reconstruction and the domain-finding problem for a class of curves.     

Rectilinear steiner tree heuristics and minimum spanning tree algorithms using geographic nearest neighbors

We study the application of the geographic nearest neighbor approach to two problems. The first problem is the construction of an approximately minimum length rectilinear Steiner tree for a set ofn points in the plane. For this problem, we introduce a variation of a subgraph of sizeO(n) used by YaO [31] for constructing minimum spanning trees. Using this subgraph, we improve the running times of the heuristics discussed by Bern [6] fromO(n ² log n) toO(n log² n). The second problem is the construction of a rectilinear minimum spanning tree for a set ofn noncrossing line segments in the plane. We present an optimalO(n logn) algorithm for this problem. The rectilinear minimum spanning tree for a set of points can thus be computed optimally without using the Voronoi diagram. This algorithm can also be extended to obtain a rectilinear minimum spanning tree for a set of nonintersecting simple polygons.The results in this paper are a part of Y. C. Yee's Ph.D. thesis done at SUNY at Albany. He was supported in part by NSF Grants IRI-8703430 and CCR-8805782. S. S. Ravi was supported in part by NSF Grants DCI-86-03318 and CCR-89-05296.     

Detrended Fluctuation Analysis of the Human EEG during Listening to Emotional Music

A nonlinear method named detrended fluctuation analysis （DFA） was utilized to investigate the scaling behavior of the human electroencephalogram （EEG） in three emotional music conditions （fear, happiness, sadness） and a rest condition （eyes-closed）. The results showed that the EEG exhibited scaling behavior in two regions with two scaling exponents β1 and β2 which represented the complexity of higher and lower frequency activity besides α band respectively. As the emotional intensity decreased the value of β1 increased and the value of β2 decreased. The change of β1 was weakly correlated with the ＇approach-withdrawal＇ model of emotion and both of fear and sad music made certain differences compared with the eyes-closed rest condition. The study shows that music is a powerful elicitor of emotion and that using nonlinear method can potentially contribute to the investigation of emotion.     

The visual control of reaching and grasping: Binocular disparity and motion parallax.

The primary visual sources of depth and size information are binocular cues and motion parallax. Here, the authors determine the efficacy of these cues to control prehension by presenting them in isolation from other visual cues. When only binocular cues were available, reaches showed normal scaling of the transport and grasp components with object distance and size. However, when only motion parallax was available, only the transpont component scaled reliably. No additional increase in scaling was found when both cues were available simultaneously. Therefore, although equivalent information is available from binocular and motion parallax information, the latter may be of relatively limited use for the control of the grasp. Binocular disparity appears selectively important for the control of the grasp. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Synthesizing Energy-Efficient Embedded Systems with LOPOCOS

In this paper, we introduce the LOPOCOS (Low Power Co-synthesis) system, a prototype CAD tool for system level co-design. LOPOCOS targets the design of energy-efficient embedded systems implemented as heterogeneous distributed architectures. In particular, it is designed to solve the specific problems involved in architectures that include dynamic voltage scalable (DVS) processors. The aim of this paper is to demonstrate how LOPOCOS can support the system designer in identifying energy-efficient hardware/software implementations for the desired embedded systems. Hence, highlighting the necessary optimization steps during design space exploration for DVS enable architectures. The optimization steps carried out in LOPOCOS involve component allocation and task/communication mapping as well as scheduling and dynamic voltage scaling. LOPOCOS has the following key features, which contribute to this energy efficiency. During the voltage scaling valuable power profile information of task execution is taken into account, hence, the accuracy of the energy estimation is improved. A combined optimization for scheduling and communication mapping based on genetic algorithm, optimizes simultaneously execution order and communication mapping towards the utilization of the DVS processors and timing behaviour. Furthermore, a separation of task and communication mapping allows a more effective implementation of both task and communication mapping optimizationsteps. Extensive experiments are conducted to demonstrate the efficiency of LOPOCOS. We report up to 38% higher energy reductions compared to previous co-synthesis techniques for DVS systems. The investigations include a real-life example of an optical flow detection algorithm.     

A Dynamic Dictionary for Priced Information with Application

In this paper we design a dynamic dictionary for the priced information model initiated by Charikar et al. Assume that a set S consisting of n elements is given such that each element has an associated price, a positive real number. The cost of performing an operation on elements of S is a function of their prices. The cost of an algorithm is the sum of the costs of all operations it performs. The objective is to design algorithms which incur low cost. In this model we propose a dynamic dictionary, supporting search, insert and delete, for keys drawn from a linearly ordered set. As an application we show that the dictionary can be used in computing the trapezoidal map of a set of line segments, a fundamental problem in computational geometry.