Bandpass filters using periodically loaded combline resonators

A novel combline filter is proposed for cellular‐radio base stations. The Q‐factor is significantly improved. The eigenvalue equation is expressed with the single‐team approximation in the gap region of the combline resonator. A two‐pole combline filter is designed. The calculation, simulation, and experiment results are presented and are in good agreement. © 2005 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

气流式加速度传感器的敏感机理

介绍了在研制气流式加速度传感器过程中，为对气流式加速度传感器进行建模，作者对气流式加速度传感器的工作机理进行了理论性探讨。在分析过程中以流体力学、传热学和惯性理论为基础并结合实验结果，建立了适合于气流式加速度传感器的气体运动方程和能量方程。同时还讨论了热线测量加速度的方法及根据实验分析了输入加速度对腔体内温度及传感器输出电压的影响，从而为进一步研究一系列气流式传感器的工作机理提供了方法。     

光通信用垂直腔面发射激光器的进展

垂直腔面发射激光器(VCSEL)以其优异的性能有望成为信息时代的新光源.文章介绍了用于光通信的VCSEL的开发现状.     

传输线衰减常数与柱形谐振器Q值的关系

文中严格地讨论了任意截面形状，任意模式的柱形谐振腔Ｑ值与构成该谐振器的传输线衰减常数间的关系，给出了更一般的公式，推广了Ｄａｖｉｄｓｏｎ和Ｓｉｍ－ｍｏｎｄｓ＾［１］、Ｂａｒｌｏｗ和Ｃｕｌｌｅｎ＾［２］以及Ｙｅｈ和Ｓｈｉｍａｂｕｋｕｒｏ＾［３，４］的结果。     

被动锁模复合环形腔掺饵光纤激光器的自启动分析

本文对被动锁模复合环形腔掺饵光纤激光器的自启动工作特性进行了分析，指出谐振腔内残余反射面的存在是阻碍激光器实现自启动锁模的主要原因。利用半导体激光器有源区的折射率随注入电流的变化而改变的特性，在谐振腔中获得了一个可移动腔镜，克服了腔内残余反射面的影响，实现了锁模的自启动。     

二维金属凹槽填充各向异性介质时散射的边界元方法:TE情形

由各向异性介质无界空间Green函数和Green恒等式出发，推导了TE波入射时二维任意截面金属凹槽填充各向异性介质时所满足的边界积分方程，并用边界元法和广义网络原理计算了金属凹槽填充各向异性介质时的散射。用文中方法退化计算了凹槽填充各向同性介质时的散射，计算结果与解析结果一致。并给出了凹槽填充各向异性介质时的散射算例。     

Polarisation behaviour of diode lasers with frequency selective feedback

The paper reviews recent results obtained with diode lasers used in external hybrid cavities with frequency selective feedback. Such cavities attract continuing interest for several reasons. They generate a tunable single laser mode with very low linewidths (usually a few tens of kilohertz). Very wide discrete tunable ranges over 100 nm for Fabry-Perot type and over 200 nm for quantum well lasers are achieved. They can be made to oscillate in a tunable mode having the desired polarization state,TE orTM and, in some cases, simultaneously atTE andTM. This is done by designing a cavity that increases strongly theTM/TE intensity ratio and by using coatings on one laser facet that greatly lower bothTE andTM reflectivities. High-speed polarization switching in the gigahertz range is possible by inserting passive or active polarization selecting elements in the cavity. For all these reasons hybrid external cavities are attractive for applications in optical metrology, spectroscopy and optical communications. Moreover, the external cavity configuration allows the study of physical mechanisms in the laser diode by inducing on purpose phenomena that would have been otherwise impossible to achieve with free-running lasers.     

介质加载圆柱腔的场分析

本文应用严格场匹配法解决了介质加载圆柱腔的本征问题，计算了圆柱腔在纵向部分填充介质后ＴＥ０１ｎ模和ＴＭ０１ｎ模的本征频率和本征场型的变化。特别分析了本征模式在空气段为截止模的情况。本文的分析方法亦可应用到纵向部分填充介质的传输线和其它形状的谐振腔。     

高功率板条固体激光器研究的进展

本文对高功率板条固体激光器研究的进展和应用前景作了综合评述。结合作者部分工作,对板条激光器的热效应、聚光器和光学谐振腔等关键问题和技术进行了物理分析。     

利用表面等离子体波共振效应(SPRE)对角度与共振波长关系的研究

本文利用了Kretchmann模型的表面等离子体波共振效应，研究了共振波长对入射角变化的敏感性，从而为研制一种新的角度传感器提供了依据。