结合公钥加密和关键字可搜索加密的加密方案

带关键字搜索的公钥加密(PEKS)是一种有用的加密原语，它允许用户将在加密数据上搜索的功能委托给不可信的第三方服务器，而不影响原始数据的安全性和隐私性。但是，由于缺乏对于数据的加密以及解密能力，PEKS方案不能单独进行使用，必须与标准的公钥加密方案(PKE)相结合。因此，Baek等人在2006年引入了一种新的加密原语，称为结合PKE和PEKS的加密方案(PKE+PEKS)，它同时提供了PKE和PEKS的功能。目前，已有文献提出了几种PKE+PEKS方案。然而，他们都没有考虑关键字猜测攻击的问题。本文提出一个新的高效且能够抵抗关键字猜测攻击的PKE+PEKS方案，与已有方案相比，该方案在性能上有很大的提升，并且在生成关键字和数据密文时，不需要使用双线性对，极大地降低了计算和存储成本。安全性分析表明，本文中所提出的方案能够满足密文隐私安全性、陷门不可区分性和抗关键字猜测攻击的安全性。效率分析表明，本分提出的方案更加高效。     

Thaumasite––direct, woodfordite and other possible formation routes

Two main formation routes for thaumasite exist below 15 °C. One is the direct route from C–S–H reacting with appropriate carbonate, sulfate, Ca²⁺ ions and excess water. The other route is the woodfordite route from ettringite reacting with C–S–H, carbonate, Ca²⁺ ions and excess water, in which thaumasite arises through the intermediate formation of the solid solution woodfordite. The woodfordite route for thaumasite formation appears to be relatively quicker (although still slow) than the direct route, presumably because with the former the ettringite already has the octahedral [M(OH)₆] units that can facilitate the critical change from [Al(OH)₆]³⁻ to [Si(OH)₆]²⁻ groupings. Both routes are mutually dependent on each other. The presence of magnesium salts can modify the path to thaumasite formation. High pressure might be able to stabilise [Si(OH)₆]²⁻ groupings and allow thaumasite to become formed above 15 °C. This possibility is discussed.     

砾岩储层精细描述中标准测井资料的应用

克拉玛依油田七区的标准测井资料是指使用标准电极系视电阻率测井、自然电位测井和井径测井,以相同的1:500深度比例尺及相同的横向比例进行测井作业所取得的资料.这种资料本来并不具备定量解释储层孔隙度和含油饱和度的能力,但这种资料占该区测井资料总量的比率高达34%.利用标准电极系视电阻率资料和岩心分析资料建立了视电阻率-岩性图版,利用自然电位减小系数α和岩心孔隙度分析资料φ建立了α-φ图版,根据综合测井资料求出标准测井视电阻率校正系数,进而确定了饱和度计算方程的参数.与相应的综合测井资料计算结果相对比,用该方法得到的孔隙度平均绝对误差及相对误差分别为1.85%和11.88%;含油饱和度平均绝对误差及相对误差分别为9.08%和24.75%.将该方法有选择地应用到该区砾岩储层精细描述研究中,弥补了缺乏综合测井资料无法进行测井储层评价及参数研究的缺陷.     

Robust State Feedback Control Through Actuators With Generalized Sector Nonlinearities And Saturation

In control systems, actuators often have nonlinear characteristics that can not be neglected. For linear systems driven by actuators satisfying the generalized sector condition, a robust state feedback controller synthesis method is proposed to achieve the ultimate boundedness control. The method is based on the linear matrix inequality approach and is easy to apply. As an important special case of the generalized sector condition, the saturation characteristic of actuators is discussed separately, and non‐conservative results are obtained.     

特低渗透油层含油饱和度的一种校正方法

松辽盆地北部扶杨油层属特低渗透油层，即使采用油基泥浆取心或密闭取心样品，束缚水饱和度也难以测准。蒸馏法试验表明，若试验温度低，则束缚水蒸发不彻底，实测含水饱和度偏低；若试验温度高，则容易造成岩样粘土矿物晶间水脱水，实测含水饱和度偏高，影响了储量计算精度。为搞清特低渗透油层流体蒸发特征，开展了蒸发率试验，试验过程是：将岩样洗油后重新饱和水，再在与蒸馏法试验相同的试验条件下测定蒸发的水量。试验结果表明，有效孔隙度越小，蒸发率越低。由于两个试验过程的蒸发率近似相等，用蒸发率试验可以模拟蒸馏法试验，由此推导出束缚水饱和度计算公式。应用该公式对榆树林油田进行测算，校正前后原始含油饱和度相差１２％以上，储量相差２０×１０６ｔ以上。图２（郭海莉摘）     

In－BiCaVIG的晶体生长与性能

本文报导了用助熔剂法成功地生长大尺寸掺铟ＢｉＣａＶＩＧ晶体的方法以及实验结果，介绍了该单晶在近红外区的磁光器件中的重要应用。     

The effect of liquid push out of the material capillaries under sulfate ion diffusion in cement composites

The paper treats complex phenomena that accompany the diffusion of sulfate ions into cement paste or systems. The ion distribution within the material was studied by designing a specific diffusion model. The model accounts for two phenomena: capillary filling with products of the chemical reactions and the subsequent liquid push out of the capillary. The approach allows to quantify the concentration of free ions having penetrated the cement stone and that of chemically reacted ions, and to assess the liquid push out. Experimental data are also presented.     

弱凝胶调驱降维数值模拟方法研究

目前用于弱凝胶调驱的化学驱软件大多存在计算速度慢、数值弥散现象严重的问题,为了提高弱凝胶调驱数值模拟的速度和精度,提出了降低维数的模拟方法。利用追踪流线的方法,将弱凝胶调驱的三维渗流问题,转化为沿流线计算饱和度的一维问题,大大降低了求解饱和度方程组中方程的数目,从而提高了计算速度。利用该方法,模拟了玉门老君庙油田一个试验井区的水驱开发历史,优化了弱凝胶调驱的注入浓度、注入速度及注入体积等参数,并预测了弱凝胶调驱的动态,预测该方案可提高采收率7.6%。     

不同压力下气层岩样m、n值变化的实验研究

胶结指数m和饱和度指数n变化规律的研究一直是岩石物理学家和测井解释分析家关注的问题。压力是影响m、n的重要因素,但迄今为止,仍未取得可使多数人接受的一般性结论。实验开展了低孔隙度低渗透率气层岩样在不同压力条件下的电阻率测量,在考虑孔隙度随压力变化的基础上建立了m、n参数随压力变化的关系,得出结论:某些地区的气层岩样在压力增大时即使考虑孔隙度变化,m值增大,n值减小。     

Kinetochemical and morphological differentiation of ettringites by the Le Chatelier-Anstett test

In this research, former XRD experiments have been verified by Le Chatelier-Ansttet (L-A) test. For this purpose, 28 cements consisting of 7 Portland cements and 21 blended cements containing 20%, 30% and 40% metakaolin have been submitted to the Le Chatelier-Anstett (L-A) test for 2 years. With all these cements, L-A specimens were manufactured and a direct parameter was measured for these specimens: increase in diameter, Δ∅, or diameter growth. Other complementary determinations were chemical analysis, XDA patterns and SEM of ettringites and specific properties of some cements tested. The experimental results have borne out that the formation rate of the ettringite formed from the reactive alumina, Al₂O₃^r−, present in pozzolans must be considerably higher than the formation rate of the ettringite from C₃A and much higher than the ettringite from C₄AF, both present in OPC. Owing to this, these ettringites were proposed being named “rapid formation” (ett-rf), “slow formation” (ett-lf) and “very slow formation” (ett-vlf) ettringites, respectively. On the other hand, these experimental results have also shown that the ett-rf has a much smaller size than the ett-lf (this is a direct consequence of the aforementioned conclusion); that almost all the alumina, Al₂O₃, present in M pozzolan must be regarded as being “reactive,” Al₂O₃^r−, or at least, the greatest part; that the detrimental effects derived from gypsum attack are shown much earlier in these POZC than in their plain OPC and, to such an extent, that this aggressive action can be described as rapid gypsum attack; and that none of the 21 POZC tested can be described as high nor moderate sulphate resistant cements according to L-A test.