Control of self‐organized low‐dimensional morphology in poly(styrene‐b‐4vinylpyridine)/polystyrene blend thin films

The surface morphologies of poly(styrene‐b‐4vinylpyridine) (PS‐b‐P4VP) diblock copolymer and homopolystyrene (hPS) binary blend thin films were investigated by atomic force microscopy as a function of total volume fraction of PS (?_PS) in the mixture. It was found that when hPS was added into symmetric PS‐b‐P4VP diblock copolymers, the surface morphology of this diblock copolymer was changed to a certain degree. With ?_PS increasing at first, hPS was solubilized into the corresponding domains of block copolymer and formed cylinders. Moreover, the more solubilized the hPS, the more cylinders exist. However, when the limit was reached, excessive hPS tended to separate from the domains independently instead of solubilizing into the corresponding domains any longer, that is, a macrophase separation occurred. A model describing transitions of these morphologies with an increase in ?_PS is proposed. The effect of composition on the phase morphology of blend films when graphite is used as a substrate is also investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3496–3504, 2004     

Structure and magnetism of bcc(1 1 0)-like Fe films grown on Cu(0 0 1) via ion beam triangulation and spin-polarized electron capture

The structure and magnetism of thin epitaxial Fe layers grown on Cu(0 0 1) is investigated by grazing scattering of fast H and He atoms. Information on the atomic structure of the film and substrate surfaces is obtained by making use of ion beam triangulation with protons. The magnetic behavior is studied via the polarization of light emitted after capture of spin-polarized electrons into excited atomic terms during scattering of He atoms. For the formation of bcc(1 1 0)-like Fe films at higher coverages, we detect differences in structural and magnetic properties for room and low temperature growth. We suggest that the crystalline structure depends on the film morphology and that Cu impurities affect the magnetic properties.     

Magnetic Properties of Metallic Multilayered Systems

Hyperfine Interactions - The giant magnetoresistance (GMR) effect was an epoch-making discovery in the field of magnetic materials research. In this article, studies on magnetic multilayered...     

Ultrathin self-assembled polymeric films on solid surfaces. I. Synthesis and characterization of acrylate copolymers containing alkyl disulfide side chains

Copolymers of 2-hydroxyethyl acrylate and 2-methoxyethyl acrylate with variable compositions were synthesized, fractionated, and characterized by ¹H-NMR, IR, GPC, and viscometry. These copolymers were further modified via polymer analog esterification of copolymer hydroxy groups by a series of disulfide-containing carboxylic acids including lipoic acid and (n-pentyldithio) alkyl carboxylic acids (n-C₅H₁₁SS(CH₂)m? COOH, m = 10, 15, 22) in the presence of 1,3-dicyclohexylcarbodiimide (DCC). Esterification reactions were quantitative for copolymers possessing hydroxy monomer contents ≤ 40% when excess acid and DCC were present for sufficiently long reaction times (2–4 days) at room temperature. Copolymer DSC analysis demonstrates a systematic variation of T_g with copolymer composition in good agreement with ideal mixing theory. These disulfide-bearing copolymers spontaneously yield two-dimensional ultrathin polymer films with side chain-dependent layer thicknesses of 20–45 Å by solution adsorption onto freshly deposited gold surfaces. Such ultrathin polymer films are expected to have diverse applications as bound polymeric surface modification reagents. © 1993 John Wiley & Sons, Inc.     

The inverse phase sequence SmA-SmC in symmetric dimeric liquid crystals

Seven homologous symmetric dimeric liquid crystals are presented where two three-ring mesogenic units are connected by a bis(carbonyloxy)alkylene spacer. For homologues with terminal heptyloxy, octyloxy and nonyloxy chains, the unusual phase sequence SmA-SmC with increasing temperature was detected by the study of the optical textures and by X-ray diffraction measurements. This unusual behaviour is discussed on the basis of the molecular structure of these compounds.     

Ultrathin Mn Doped Ni-MOF Nanosheet Array for Highly Capacitive and Stable Asymmetric Supercapacitor

In this study, we demonstrate that an Mn-doped ultrathin Ni-MOF nanosheet array on nickel foam (Mn_0.1-Ni-MOF/NF) serves as a highly capacitive and stable supercapacitor positive electrode. The Mn_0.1-Ni-MOF/NF shows an areal capacity of 6.48 C cm⁻² (specific capacity C: 1178 C g⁻¹) at 2 mA cm⁻² in 6.0 m KOH, outperforming most reported MOF-based materials. More importantly, it possesses excellent cycle stability to maintain 80.6 % capacity after 5000 cycles. An asymmetric supercapacitor device utilizing Mn_0.1-Ni-MOF/NF as the positive electrode and activated carbon as the negative electrode attains a high energy density of 39.6 Wh kg⁻¹ at 143.8 Wkg⁻¹ power density with a capacitance retention of 83.6 % after 5000 cycles.     

Formation and tribological properties of two‐component ultrathin ionic liquid films on Si

Several single‐component and two‐component imidazolium ionic liquids (ILs) ultrathin films were formed on Si substrates by a dip‐coating and heat treatment process. The formation and surface properties of the films were analyzed by means of ellipsometric thickness measurement, X‐ray photoelectron spectra and atomic force microscope. The adhesive and nanotribological behaviors of the films were evaluated by a homemade colloidal probe. A ball‐on‐plate tribometer was used to test the microtribological performances of these films. As a result, the two‐component ILs ultrathin film containing 80% solid‐like ILs phase shows more homogenous surface morphologies and optimal micro/nano‐tribological properties as compared to single‐component ILs films, which is ascribed to a synergic effect between the steady solid‐like ILs phase as the backbone and the proper amount of flowable liquid‐like ILs phase. By studying the influence of various solid/liquid ILs ratios on tribological properties of the two‐component ILs films, we might find the way to design ILs films with excellent comprehensive tribological properties. Copyright © 2010 John Wiley & Sons, Ltd.     

Separation Membranes Constructed from Inorganic Nanofibers by Filtration Technique

Nanofibrous materials have been extensively investigated and used as building blocks for various nanodevices, due to their unique one‐dimensional structures. Recently, novel membranes constructed by using nanofibers have been reported by various techniques. Here, we will give a critical review of our recent research on the general solution processed unique sub‐3 nm thin metal hydroxide nanofibers and their application for constructing ultrathin separation membranes via filtration technique. The superior separation performances of these membranes hold the promising future for pressure‐driven membrane separation processes.     

A structural analysis of ultrathin barrier (In)AlN/GaN heterostructures for GaN-based high-frequency power electronics

Metal–organic chemical vapor deposition (MOCVD) is one of the best growth methods for GaN-based materials as well-known. GaN-based materials with very quality are grown the MOCVD, so we used this growth technique to grow InAlN/GaN and AlN/GaN heterostructures in this study. The structural and surface properties of ultrathin barrier AlN/GaN and InAlN/GaN heterostructures are studied by X-ray diffraction (XRD) and atomic force microscopy (AFM) measurements. Screw, edge, and total dislocation densities for the grown samples have been calculated by using XRD results. The lowest dislocation density is found to be 1.69 × 10⁸ cm⁻² for Sample B with a lattice-matched In_0.17Al_0.83N barrier. The crystal quality of the studied samples is determined using (002) symmetric and (102) asymmetric diffractions of the GaN material. In terms of the surface roughness, although reference sample has a lower value as 0.27 nm of root mean square values (RMS), Sample A with 4-nm AlN barrier layer exhibits the highest rough surface as 1.52 nm of RMS. The structural quality of the studied samples is significantly affected by the barrier layer thickness. The obtained structural properties of the samples are very important for potential applications like high-electron mobility transistors (HEMTs).