Ultra <Emphasis Type="Italic">LI</Emphasis>-ideals in lattice implication algebras and <Emphasis Type="Italic">MTL</Emphasis>-algebras

A mistake concerning the ultra LI-ideal of a lattice implication algebra is pointed out, and some new sufficient and necessary conditions for an LI-ideal to be an ultra LI-ideal are given. Moreover, the notion of an LI-ideal is extended to MTL-algebras, the notions of a (prime, ultra, obstinate, Boolean) LI-ideal and an ILI-ideal of an MTL-algebra are introduced, some important examples are given, and the following notions are proved to be equivalent in MTL-algebra: (1) prime proper LI-ideal and Boolean LI-ideal, (2) prime proper LI-ideal and ILI-ideal, (3) proper obstinate LI-ideal, (4) ultra LI-ideal. This work was supported by the Zhejiang Provincial Natural Science Foundation of China (Grant No. Y605389) and K. C. Wong Magna Fund in Ningbo University.     

Working group report: Neutrino and astroparticle physics

This is the report of neutrino and astroparticle physics working group at WHEPP-7. Discussions and work on CP violation in long baseline neutrino experiments, ultra high energy neutrinos, supernova neutrinos and water Cerenkov detectors are discussed.     

Towards advanced circuit board materials: adhesion of copper foil to ultra‐high molecular weight polyethylene composite

Polyethylene based composites are attractive materials for advanced circuit board applications because of their unique combination of properties: low dielectric constant and loss factor, light weight, high flexural modulus and low thermal expansion coefficient controlled in all spatial directions. This investigation describes a process to consolidate chopped fibers of ultra‐high molecular weight polyethylene concurrently with its bonding to a copper foil. Bonding is affected by a thin sheet of low‐density polyethylene, incorporating a crosslinking agent with a concentration gradient across the sheets thickness. In this single step process, the composite material is formed and bonded to the metal foil, achieving good adhesion without the use of extraneous glue. Copyright © 2002 John Wiley & Sons, Ltd.     

QuEChERS/超高效液相色谱-串联质谱法同时测定水产品中四溴双酚A与六溴环十二烷

建立了同时测定水产品中四溴双酚A(TBBPA)和六溴环十二烷(HBCD)的超高效液相色谱-串联质谱方法。样品前处理采用QuEChERS方法,均质生物样品用水分散后加乙腈提取,经C_(18)分散固相萃取净化。采用CORTECS~?C_(18)色谱柱(4.6 mm×100 mm×2.7μm)分离,以甲醇-水为流动相进行梯度洗脱,流速为0.7 mL/min。采用电喷雾离子源,在负离子模式下以多反应监测(MRM)方式检测。结果表明,TBBPA和3种HBCD单体在0.5～500μg/L范围内线性良好,相关系数(r)大于0.998,检出限(LOD,S/N=3)和定量下限(LOQ,S/N=10)分别为0.04～0.16μg/kg和0.12～0.55μg/kg。在5、20、50μg/kg加标水平下的平均回收率为74.0%～121%,相对标准偏差(RSD)为0.20%～23%。该方法操作简单、快速、重现性好,适用于水产品中TBBPA和HBCD的快速检测。     

水合醋酸铈直接热分解制备超细氧化铈及其抛光性能

Ultra fine ceria was prepared by calcining hydrate cerium acetate. The effects of pyrolysis temperature on the particle size, morphology, specific surface area and loose packing density of ceria were investigated, and the removal rate of optical glasses polishing by ceria was determined. The results show that with the increase of pyrolysis temperature, the loose deposit density and crystallinity increases and the specific surface area decreases, however, the particle size decreases firstly and then increases, the minimum medium particle size D₅₀ is 0.47 μm at pyrolysis temperature of 1 000 ℃. The SEM images of ceria prepared by the decomposition at 800 ℃ or at 1 100 ℃ show porous powders or quasi-sphere small particles with loosely agglomeration, respectively. It was found that the removal rate varied with pyrolysis temperature in preparation of ceria and the property of glass polished. The removal rate for three kinds of glasses was in the order of ZF7> F1> K9, and the maximum value appeared at around 1 000 ℃ for ZF7 and F1, and at around 1 100 ℃ for K9.     

Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.     

溶剂萃取法制备Co(PO_3)_2超细微粉

本文用溶剂萃取法成功地制备了偏磷酸钴超细微粉并通过ＸＲＤ，ＩＲ，ＴＧ，ＤＴＡ，ＴＥＭ等实验对超细微粉的组成、结构进行了表征。     

无机阴离子的毛细管电泳分析

本文研究了常见无机阴离子的毛细管电泳规律，考察了分离电压、电解质熔液组成、浓度、ｐＨ值等对分离的影响，建立了高效、快速的无机阴离子毛细管电泳分析方法。在选定的实验条件下，各种常见无机阴离子在５ｍｉｎ内达到完全分离，对Ｂｒ＾－和Ｃｌ＾－的分离柱效每米可达７６万理论板数。迁移时间的相对标准偏差小于１％，峰面积的相对标准偏差小于５％，各离子的最低检测浓度为０．０５￣０．５μｇ／ｍｌ。     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

一种油介质开关振荡器研究

为了产生较高中心频率宽带高功率微波, 对一种填充变压器油作为绝缘介质的1/4波长开关振荡器进行了研究。首先对这种开关振荡器特性阻抗分布进行了分析;然后利用静态电场仿真结果和变压器油击穿实验数据, 分析了该振荡器的耐压能力;在此基础上, 利用CST软件对其瞬态工作特性进行了仿真, 考察了开关间隙击穿位置和间隙电压下降时间对产生阻尼正弦信号的峰值和频率的影响;最后介绍了该振荡器以一种方向系数为3的短螺旋天线作为辐射天线的实验测试结果, 结果表明, 该开关振荡器充电电压上升时间为15 ns时, 耐压达到-322 kV, 产生宽带高功率微波中心频率约360 MHz, 3 dB带宽约22%, 辐射因子170 kV。