BN链掺杂的石墨烯纳米带的电学及磁学特性

基于密度泛函理论第一性原理系统研究了BN链掺杂石墨烯纳米带(GNRs)的电学及磁学特性, 对锯齿型石墨烯纳米带(ZGNRs)分非磁态(NM)、反铁磁态(AFM)及铁磁性(FM)三种情况分别进行考虑. 重点研究了单个BN链掺杂的位置效应. 计算发现: BN链掺杂扶手椅型石墨烯纳米带(AGNRs) 能使带隙增加, 不同位置的掺杂, 能使其成为带隙丰富的半导体. BN链掺杂非磁态ZGNR的不同位置, 其金属性均降低, 并能出现准金属的情况; BN链掺杂反铁磁态ZGNR, 能使其从半导体变为金属或半金属(half-metal), 这取决于掺杂的位置; BN链掺杂铁磁态ZGNR, 其金属性保持不变, 与掺杂位置无关. 这些结果表明: BN链掺杂能有效调控石墨烯纳米带的电子结构, 并形成丰富的电学及磁学特性, 这对于发展各种类型的石墨烯基纳米电子器件有重要意义. 关键词： 石墨烯纳米带 BN链掺杂 输运性质 自旋极化     

Simulating periodic trends in the structure and catalytic activity of coinage metal nanoribbons

We present a systematic density functional theory (DFT) study of the structure and catalytic activity of group 10 (Ni, Pd, Pt) and group 11 (Cu, Ag, Au) coinage metal nanoribbons. These infinite, periodic, quasi‐one‐dimensional structures are conceptually important as intermediates between small metal clusters and close‐packed metal surfaces, and have been shown experimentally to be practical catalysts. We find that nanoribbons have significantly higher predicted H₂ dissociation activity than close‐packed metal surfaces consistent with their lower coordination numbers. Computed periodic trends are reasonable, with late transition states and low barriers for H₂ dissociation over late group 10 nanoribbons, suggesting their promise as practical catalysts. These trends are consistent with the isolated nanoribbons' computed molecular electrostatic potentials. Calculations also predict nearly linear Brønsted–Evans–Polanyi relationships between the nanoribbons' H₂ dissociation energies and dissociation barriers. We also test new meta‐generalized gradient approximation (GGA) and hybrid DFT approximations for H₂ dissociation over these nanoribbons. These new functionals increase the (generally underestimated) dissociation barriers predicted by standard GGAs, motivating their continued application in surface chemistry. © 2015 Wiley Periodicals, Inc.     

On-surface synthesis of porous graphene nanoribbons containing nonplanar [14]annulene pores

The precise introduction of nonplanar pores in the backbone of graphene nanoribbon represents a great challenge. Here, we explore a synthetic strategy toward the preparation of nonplanar porous graphene nanoribbon from a predesigned dibromohexabenzotetracene monomer bearing four cove-edges. Successive thermal annealing steps of the monomers indicate that the dehalogenative aryl-aryl homocoupling yields a twisted polymer precursor on a gold surface and the subsequent cyclodehydrogenation leads to a defective porous graphene nanoribbon containing nonplanar [14]annulene pores and five-membered rings as characterized by scanning tunneling microscopy and noncontact atomic force microscopy. Although the C–C bonds producing [14]annulene pores are not achieved with high yield, our results provide new synthetic perspectives for the on-surface growth of nonplanar porous graphene nanoribbons.     

Phosphorene Supported Single-Atom Catalysts for CO Oxidation: A Computational Study

Single-atom catalysts (SACs) have attracted extensive attention owing to their high catalytic activity. The development of efficient SACs is crucial for applications in heterogeneous catalysis. In this article, the geometric configuration, electronic structure, stabilitiy and catalytic performance of phosphorene (Pn) supported single metal atoms (M=Ru, Rh, Pd, Ir, Pt, and Au) have been systematically investigated using density functional theory calculations and ab initio molecular dynamics simulations. The single atoms are found to occupy the hollow site of phosphorene. Among the catalysts studied, Ru-decorated phosphorene is determined to be a potential catalyst by evaluating adsorption energies of gaseous molecules. Various mechanisms including the Eley-Rideal (ER), Langmuir-Hinshelwood (LH) and trimolecular Eley-Rideal (TER) mechanisms are considered to validate the most favourable reaction pathway. Our results reveal that Ru−Pn exhibits outstanding catalytic activity toward CO oxidation reaction via TER mechanism with the corresponding rate-determining energy barrier of 0.44 eV, making it a very promising SAC for CO oxidation under mild conditions. Overall, this work may provide a new avenue for the design and fabrication of two-dimensional materials supported SACs for low-temperature CO oxidation.     

石墨烯条带的电子结构与性质:电场及长度效应

在密度泛函理论(DFT)和含时密度泛函理论(TDDFT)的基础上对宽度上含有8个zigzag链的石墨烯条带(8-ZGNR)的基态和激发态的性质进行了理论研究,着重考察了条带长度及电场的影响.B3LYP杂化泛函的计算结果显示:在基态上,8-ZGNR的最低能量态并不具有磁性,随着长度的增加,才会显示出反铁磁的性质.静电场的加入使8-ZGNR显示出反铁磁性和半金属性.在激发态上,诱导电子会随着外激光脉冲的变化而发生移动和变化,但是相比而言,α自旋电子更容易被激发而产生较明显的诱导电子密度,而β自旋电子则更容易脱离外激光场的控制而产生非绝热现象.     

On‐Surface Synthesis and Characterization of Triply Fused Porphyrin–Graphene Nanoribbon Hybrids

On‐surface synthesis offers a versatile approach to prepare novel carbon‐based nanostructures that cannot be obtained by conventional solution chemistry. Graphene nanoribbons (GNRs) have potential for a variety of applications. A key issue for their application in molecular electronics is in the fine‐tuning of their electronic properties through structural modifications, such as heteroatom doping or the incorporation of non‐benzenoid rings. In this context, the covalent fusion of GNRs and porphyrins (Pors) is a highly appealing strategy. Herein we present the selective on‐surface synthesis of a Por–GNR hybrid, which consists of two Pors connected by a short GNR segment. The atomically precise structure of the Por–GNR hybrid has been characterized by bond‐resolved scanning tunneling microscopy (STM) and noncontact atomic force microscopy (nc‐AFM). The electronic properties have been investigated by scanning tunneling spectroscopy (STS), in combination with DFT calculations, which reveals a low electronic gap of 0.4 eV.     

Tunable magnetism through edge functionalization in zigzag green phosphorene nanoribbons

Ab initio density-functional theory calculations with spin polarization are performed to explore magnetic properties in zigzag green phosphorene nanoribbons (ZGPNRs) with no passivation or edge-saturated by H, OH and O chemical species. It is found that antiferromagnetic order at intra-edges is the most energetically favorable for the pristine and oxygen passivated ribbons, while H- or OH-saturated ZGPNRs show nonmagnetic order. It indicates that edge states arising from the unsaturated bonds are vital for the formation of the magnetic moment in the ZGPNRs. The magnitude of the edge magnetism in the pristine and O-saturated ZGPNRs is comparable to that in zigzag black phosphorene nanoribbons. Electronic band structures, spin densities and spd-orbital projected density of states for the studied pristine and O-passivated ZGPNRs are further analyzed to study their electronic properties. The magnetic and electronic properties discovered in the ZGPNRs may suggest potential applications in future spintronics and electronics.     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

非近邻跳跃对扶手椅型石墨烯纳米带电子结构的影响

根据π电子的紧束缚模型,将电子的次近邻和第三近邻跳跃能考虑在内,得到扶手椅型石墨烯纳米带（AGRNs）能带结构的解析解.讨论了由次近邻和第三近邻电子跳跃引起的能带和能隙变化,发现次近邻和第三近邻跳跃分别对带隙产生增大和减小的影响. 比较了边界弛豫与非近邻跳跃之间的互相竞争关系. 当纳米带的宽度n为奇数时,二维石墨面的紧束缚模型中所固有的van Hove奇异性表现为AGRNs中的无色散带. 当AGRNs宽度增加时,能谱趋向于二维石墨烯时的能谱结构. 关键词： 扶手椅型石墨烯纳米带 非近邻跳跃 边界弛豫 电子结构     

Chiral selective tunneling induced graphene nanoribbon switch

An armchair graphene nanoribbon switch has been designed based on the principle of the Klein paradox. The resulting switch displays an excellent on-off ratio performance. An anomalous tunneling phenomenon, in which electrons do not pass through the graphene nanoribbon junction even when the conventional resonance condition is satisfied, is observed in our numerical simulations. A selective tunneling rule is proposed to explain this interesting transport behavior based on our analytical results. Based on this selective rule, our switch design can also achieve the confinement of an electron to form a quantum qubit.