A short note on the entrainment and exit boundary conditions

An attempt is made to find out the suitable entrainment and exit boundary conditions in laminar flow situations. Streamfunction vorticity formulation of the Navier–Stokes equations are solved by ADI method. Two‐dimensional laminar plane wall jet flow is used to test different forms of the boundary conditions. Results are compared with the experimental and similarity solution and the proper boundary condition is suggested. The Kind 1 boundary condition is recommended. It consists of zero first derivative condition for velocity variable and for streamfunction equation, mixed derivative at the entrainment and exit boundaries. Copyright © 2005 John Wiley & Sons, Ltd.     

Feasibility Exploration of Laser‐based Techniques for Characterization of a Flashing Jet

Two‐phase flows hold an interest in many areas of science and engineering. In the safety field, one such topic is the accidental release of flammable and toxic pressure‐liquefied gases. In case of such a release, a flashing vapor explosion takes place resulting in a very dense two‐phase cloud. If the released substance is flammable, this cloud can be combustible and can lead to deflagration or detonation. For understanding the source processes of flashing and risk assessment, data related to cloud characteristics (i.e. droplet size, velocity etc.) is needed especially in the near region of the release. Due to the non‐equilibrium nature of the near field regions accurate data measurement is not possible with intrusive techniques. Therefore, laser‐based optical techniques (like Particle Image Velocimetry (PIV), Particle Tracking Velocimetry and Sizing (PTVS), Phase Doppler Anemometry (PDA) etc.) present the only possibility to obtain information for particle diameter and velocity evolution in this harsh environment.     

Production of superfine fibers by the electrospinning method

Weakly conducting fluid flows in an electric field in the presence of phase interfaces are investigated theoretically and experimentally. The object of the investigation is an axisymmetric jet. The analysis is carried out within the framework of electrohydrodynamics (EHD) with allowance for surface charge transfer on mobile interfaces. The jet shape is calculated at large distances from the outflow point. The theoretical and experimental data are compared for Newtonian and polymeric fluids.     

XPS investigations of ink‐jet printed paper

Different ink‐jet printed paper materials were investigated using X‐ray photoelectron spectroscopy (XPS) yielding the elemental composition of the near‐surface region of the papers. We found significant differences with respect to the detected elements and their atomic concentrations in the different inks studied here. Two different groups of inks could be identified by means of a lower ratio of the O and C atomic concentrations and lower concentrations in specific trace elements like Mg, Na and Si. High‐resolution spectra of C 1s and O 1s core levels allowed a detailed determination of the chemical state of the respective elements. On the basis of a detailed deconvolution of these XPS signals, significant differences between all the investigated ink‐jet printed papers were found, thereby allowing their discrimination. The applicability of the measurements and, more generally, the XPS technique for forensic investigations of paper are discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

精制煤液化中油加氢裂化制取喷气燃料的研究

在实验室固定床反应装置上,选用Mo-Ni-P/Si-Al工业催化剂,对精煤液化中油进行了加氢裂化制取喷气燃料的实验。考察了反应温度、空速对芳烃加氢转化及产品馏分分布的影响。通过加氢裂化,降低了油品芳烃含量,提高了喷气燃料馏分的收率。在总压为15MPa,反应温度为350—360℃,空速为0.8—1.0h~(-1)条件下,获得了芳烃含量低于10w%的低结晶点的优质喷气燃料产品。并对煤液化中油制取的喷气燃料的组成和性质进行了分析和评价。     

Nitriding of titanium with plasma jet under reduced pressure

The nitriding of titanium with argon-nitrogen (3%) and argon-nitrogen (3%)-hydrogen (2%) plasma jets at pressures of 190 torr was studied. The reaction kinetics obeyed mainly a parabolic law. The parabolic kinetic constants were 10^–10–10^–8 g² cm^–4 s^–1, which were 2–3 orders of magnitude larger than those in R.F. discharges. From emission spectroscopy, nitrogen atoms in the excited states were observed. The nitrogen atoms can promote the nitriding reaction. The effect of the addition of hydrogen to nitrogen is also briefly discussed.     

Supersonic jet spectroscopy of naphthalene–fluorene bichromophoric cluster

We have investigated the supersonic jet spectroscopy and photophysics of 1-methylnaphthalene–fluorene (1MN–FL) cluster, and looked for indications of intramolecular electronic energy transfer (Intra-EET) from the FL (donor, D) to 1MN (acceptor, A). The clusters were identified by their time of flight (TOF) mass spectra. We observed clusters bands in the LIF spectrum near the region of 1MN origin. We have also observed cluster TOF–resonance enhanced multi-photon ionization (REMPI) spectrum near the electronic origin of the fluorene moiety. However, this spectrum was almost independent of the excitation wavelength, and was not observed in the LIF spectrum. This is probably due to fast Intra-EET resulting in lifetime broadening of the donor chromophore cluster spectrum, similar to that observed previously for the naphthalene–anthracene bichromophoric system.     

Kinetics of the surface tension of micellar solutions: Comparison of different experimental techniques

The kinetics of the surface tension of micellar solutions of nonionic surfactant Triton X-100 is measured experimentally by means of three different techniques: oscillating jet, maximum bubble pressure and inclined plate. They allow to study the micellization kinetics at various time scales (from a few milliseconds to a few seconds) in fairly large concentration region up to 50 times CMC. The experimental data are satisfactorily explained by a theoretical model accounting for the kinetics of micellization, diffusion of surfactant species and expansion of the bubble interface. By this model are computed the characteristic times of diffusion and micellization, which are of comparable magnitude (about 5 to 200 ms), and the Gibbs' elasticity. The micellization time constant corresponds to the slow relaxation process known to coincide with the disintegration of micelles. Comparing our data with other data from literature one can conclude that more realistic information for the micellization kinetics is obtained by the maximum bubble pressure and the oscillating jet method. The inclined plate seems too slow to measure the relaxation processes in micellar solutions of this surfactant.     

Modelling of the pressure-velocity correlation in turbulence diffusion

Most current computations of trubulent flows with second-moment closure adopt the diffusion models which neglect the effect of pressure-velocity correlation. In the present paper the importance of this correlation effect is elucidated the neglect of this effect accounts for some major defects in the wide application of the second-moment closures. Through the relation between and , established by Lumley, we propose here a new turbulence diffusion model which takes into consideration the pressure effect. Applications of this new model in the computation of shearless turbulence mixing layer and plane and round-jet flows show that the spreading rate of these flows can be satisfactorily captured.     

Biological Risk Assessment of Three Dental Composite Materials following Gas Plasma Exposure

Gas plasma is an approved technology that generates a plethora of reactive oxygen species, which are actively applied for chronic wound healing. Its particular antimicrobial action has spurred interest in other medical fields, such as periodontitis in dentistry. Recent work has indicated the possibility of performing gas plasma-mediated biofilm removal on teeth. Teeth frequently contain restoration materials for filling cavities, e.g., resin-based composites. However, it is unknown if such materials are altered upon gas plasma exposure. To this end, we generated a new in-house workflow for three commonly used resin-based composites following gas plasma treatment and incubated the material with human HaCaT keratinocytes in vitro. Cytotoxicity was investigated by metabolic activity analysis, flow cytometry, and quantitative high-content fluorescence imaging. The inflammatory consequences were assessed using quantitative analysis of 13 different chemokines and cytokines in the culture supernatants. Hydrogen peroxide served as the control condition. A modest but significant cytotoxic effect was observed in the metabolic activity and viability after plasma treatment for all three composites. This was only partially treatment time-dependent and the composites alone affected the cells to some extent, as evident by differential secretion profiles of VEGF, for example. Gas plasma composite modification markedly elevated the secretion of IL6, IL8, IL18, and CCL2, with the latter showing the highest correlation with treatment time (Pearson’s r > 0.95). Cell culture media incubated with gas plasma-treated composite chips and added to cells thereafter could not replicate the effects, pointing to the potential that surface modifications elicited the findings. In conclusion, our data suggest that gas plasma treatment modifies composite material surfaces to a certain extent, leading to measurable but overall modest biological effects.