Influence of chemical composition of filler's surface on the burning of foam plastics

The influence of additives such as TiO₂, Al₂O₃ and their mechanical mixture as well as aluminium oxide, the surface of which contains phosphorous and titanium-oxide nanostructures, on the combustibility of foam plast (trade mark PEN-I), produced on the basis of epoxide novolak block-copolymers, was studied. It was stated that the incorporation both phosphorous-containing and titanium-containing oxides in the composition results in significant (in two to five times) decreasing of the samples’ combustibility. The probable mechanism of inhibition of burning process for those combustion retarders was discussed.     

Non-equilibrium grain boundary cosegregation of Mo and P

The segregation of P at grain boundaries is believed to be an important cause of temper embrittlement in steels. As an alloy element, Mo may reduce the embrittlement. However, the concentration measured by Auger electron spectroscopy at the grain boundary in 2.25Cr1MoV and 12Cr1MoV showed that the concentration of P increased with that of Mo, which indicates that Mo and P cosegregated to the grain boundary in Cr-Mo steels.     

Electromagnetic field distribution on a rough gold thin film: An experimental study as a function of the gold thickness

The electromagnetic field distribution on an illuminated rough gold surface has been investigated by apertureless scanning near-field optical microscopy. The sample consists of an alumina substrate with a variable gold coverage ranging from 0 to 30 monolayers (ML). For such small thicknesses, the metal layer is not continuous but exhibits a certain roughness. We have studied the influence of this thickness on the electromagnetic field localization on the surface. For a gold coverage smaller than 10 equivalent monolayers, the electromagnetic field is almost uniform on the surface. For 10 and 14 ML, the field becomes inhomogeneous and isolated, localized peaks start to be visible. The width of the peaks is smaller than 50 nm. Above 14 ML, strong variations are apparent everywhere on the sample. Their amplitude tends to saturate beyond 24 ML. A complete statistical study of the sample (standard deviation, Fourier analysis) is performed.     

The effect of thermal annealing on the structural and mechanical properties of a-C:H thin films prepared by the CFUBM magnetron sputtering method

a-C:H films were prepared by closed-field unbalanced magnetron (CFUBM) sputtering on silicon substrates using argon (Ar) and acetylene (C₂H₂) gases, and the effects of post-annealing temperature on structural and mechanical properties were investigated. Films were annealed at temperatures ranging from 300 °C to 700 °C in increments of 200 °C using rapid thermal annealing equipment in vacuum ambient. Variations in microstructure were examined using Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Surface and mechanical properties were investigated by atomic force microscopy (AFM), nano-indentation, residual stress tester, and nano-scratch tester. We found that the mechanical properties of a-C:H films deteriorated with increased annealing temperature.     

Block copolymer adsorption from a homopolymer melt to an amine-terminated surface

Using neutron reflectometry, the adsorption of diblock copolymers from a neutral polystyrene (PS) matrix is studied as a function of substrate type and non-adsorbing block degree of polymerization. The block copolymer is poly(deutero styrene)-block-poly(methyl methacrylate) and the substrates are silicon oxide, SiO_x, and SiO_x functionalized with (3-aminopropyl)triethoxysilane (APTES). We have determined the equilibrium volume fraction-depth profiles for such films, and compared them with volume fraction profiles generated by self-consistent mean-field (SCMF) theory and find good agreement between the experimental and theoretical data. SCMF calculations show that the segmental interaction energy between PS matrix chains and APTES is two orders of magnitude stronger than that between PS and SiO_x.     

Pearling instabilities in water-dispersed copolymer cylinders with charged brushes

We investigate the structural behavior of a poly(styrene)-block-poly(acrylic acid) diblock copolymer which forms hexagonally-packed PS cylinders (C-phase) in the melt state. The water dispersion of this structure provides hairy cylinders which comprise a PAA swollen cylindrical brush with a height h tunable via its degree of ionization and the ionic strength in the solution, and a water-free, PS cylindrical core of constant radius R_C. Such system constitutes an out-of-equilibrium frustrated model system: the selective swelling of the PAA brush results in a frustration of the interface curvature, which the ratio h/R_C allows to quantify. Upon heating at a temperature higher than the glass transition temperature of the PS core, the glassiness of the core is relieved and the mechanical constraints arising from the selective swelling of the structure can be relaxed: the cylinders undergo a cylinder-to-sphere transition upon annealing at high temperature, when above a frustration threshold h/R_C 1.8. Thanks to a careful mapping of the transition diagram, an undulating cylindrical morphology (UC) is identified between unchanged cylinders ( h/R_C 1.8) and spheres ( h/R_C 2.0), which appears to result from a Rayleigh-like pearling instability of the copolymer cylinders.     

Lattice Boltzmann Simulations of Particle-Particle Interaction in Steady Poiseuille Flow

The moving behaviour of two- and three-particles in a pressure-driven flow is studied by the lattice Boltzmann simulation in two dimensions. The time-dependent values, including particles＇ radial positions, translational velocities, angular velocities, and the x-directional distance between the particles are analysed extensively. The effect of flow Reynolds number on particle motion is also investigated numerically. The simulation results show that the leading particle equilibrium position is closer to the channel centre while the trailing particle equilibrium position is closer to the channel wall. If Reynolds number Re is less than 85.30, the larger flow Reynolds number results in the smaller x-directional equilibrium distance, otherwise the x-directional distance increases almost linearly with the increase of time and the particles separate finally. The simulation results are helpful to understand the particle-particle interaction in suspensions with swarms of particles.     

Valence changes of manganese and praseodymium in Pr1−xSrxMn1−yInyO3−δ perovskites upon cation substitution as determined with XANES and ELNES

Systematic valence changes in Pr_1−xSr_xMn_1−yIn_yO_3−δ upon cation substitution with Sr²⁺ and In³⁺ have been found using Mn K-edge and Pr L-edge X-ray absorption, and Mn L_II,III and Pr M_IV,V electron energy-loss spectroscopy. The average valence of the praseodymium ions is close to +3.0 and virtually constant over the sample set when the samples also contained manganese ions. Pr_0.5Sr_0.5InO_3−δ showed a distinct increase in the praseodymium valence state. In contrast, the average valence of the manganese ions changed from the trivalent state to intermediate values between +3.0 and +4.0 and approached the tetravalent state depending on the level of substitution. The knowledge of the valence is required to understand the conduction mechanisms in the material due to the small polaron hopping (electronic conductivity) and motion of oxygen ions along the vacancies (ionic conductivity). Addition of strontium and indium led to the formation of oxygen vacancies. A previously assumed intermediate valence of praseodymium as causal factor for the higher oxygen catalytic activity cannot be confirmed with room temperature measurements.     

Cascaded Optical Buffer Based on Nonlinear Polarization Rotation in Semiconductor Optical Amplifiers

A cascaded buffer based on nonlinear polarization rotation in semiconductor optical amplifiers is proposed, which is suitable for fast reconfiguration of buffering time at picoseconds. With the proposed buffer, sixty different buffer times are demonstrated at 2.5Gb/s.