X波段六腔渡越管振荡器的高频特性研究

 从麦克斯韦方程出发，采用时域有限差分法（FDTD）和离散傅里叶变换（DFFT）相结合的方法，通过数值计算得出了六腔开放式谐振腔中前四个谐振频率和场分布，计算出的谐振频率与实验测量结果基本相同。比较了开放腔和封闭腔谐振频率，验证了TEM波吸收边界条件，并在实际编程计算中得以应用。计算结果为六腔渡越管振荡器的机理研究提供了依据。     

Dynamic response of permalloy/Cu/Co magnetoresistive sandwiches

The dynamic response of trilayer magnetoresistive permalloy/Cu/Co films was studied by high-frequency permeability spectra measurements. The resonance frequency is shown to depend on the interlayer copper thickness. This dependence is related to exchange coupling between permalloy and cobalt and the interaction field is estimated using the Landau–Lifschitz–Gilbert model.     

高精度的光纤衰减系数测试系统的设计

利用常规仪器设备，设计了一套集光、机、电为一体的光纤衰减测量,实现了数字化监测显示，并可与微机接口；采用双光路法，消除了由于光源光强不稳定产生的误差。     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.     

三包层WⅠ和WⅡ型单模光纤波导色散特性的研究

研究了三包层WⅠ和WⅡ型单模光纤的波导色散特性。结果发现在相同条件下，三包层WⅠ和WⅡ型单模光纤零色散点的调节范围比传统的双包层W型单模光纤明显增大。详细分析了几何参量P、Q和光学参量R1、R2对单模传输时的波导色散特性和低次模截止频率的影响。所得的研究结果为获得更为理想的色散补偿、色散平坦光纤及设计新型无源光器件提供了重要的依据。计算波导色散的方法可推广到多包层光纤。     

用频域法实现圆环形目标物的计数

研究了用频域法实现圆环形目标物计数的方法。对空域中含有圆环形目标物的二值图像，经傅里叶变换后在频域内进行滤波，再经傅里叶反变换后取一阈值进行处理，则对应于圆环形目标物即变为一个实心体，然后对实心体进行计数即可实现对圆环形目标物的计数。对该方法进行了数学描述，并分别用模拟图像和实际图像进行了实验。结果表明，该方法消除噪声的效果好，对部分封闭圆的检测同样有效，且可用于目标物有粘连的情况。该方法对圆环形目标物的尺寸相差不大的情况更为有效。     

Comparative Study on Large and Small Signal Theory for Intensity Modulation Response of Semiconductor Lasers Including Higher-Order Dispersion Terms

In this article, the comparison of large signal theory and small signal theory has been done with dispersive propagation of optical signal with IMDD (Intensity Modulation Direct Detection) systems for semiconductor lasers with higher-order dispersion terms. The expressions for an exact large signal theory and small signal theory including higher-order dispersion terms for propagation of an optical wave with sinusoidal amplitude and frequency modulation in a dispersive fiber have been derived. It is observed that small signal theory is more sensitive compared to large signal theory in terms of intensity modulation/direct detection systems. Also, it is reported that for large signal analysis the higher-order effects of dispersion can be ignored, whereas for small signal theory, the higher-order effects can be ignored for lower modulation frequencies only. The variation in the transfer function for various values of modulation indices are greater for small signal analysis than for large signal analysis. Also, as the intensity modulation index is increased, there is a decrease in the value of transfer function. The large signal model approximates the small signal model for lower values of the intensity modulation index.     

基于LiCo0.8M0.2O2 (M=Ni,Zr)薄膜的全固态薄膜锂电池

用射频磁控溅射结合传统退火的方法制备LiCo0.8M0.2O2 (M=Ni,Zr)阴极薄膜．X射线衍射、拉曼光谱、扫描电子显微镜等手段表征了不同掺杂的LiCo0.8M0.2O2薄膜．结果显示,700℃退火的LiCo0.8M0．2O2薄膜具有类似α-NaFeO2的层状结构．通过对不同掺杂锂钴氧阴极的全固态薄膜锂电池Li／LiPON／LiCo0.8M0.2O2的电化学性能研究表明,电化学活性元素Ni的掺杂使全固态电池具有更大的放电容量(56μAh／cm2μm),而非电化学活性元素Zr的掺杂使全固态电池具有更好的循环稳定性．     

DESIGN OF A NOVEL 2-D UNIPLANAR CRLH-TL STRUCTURE

A novel uniplanar 2-D composite right/left-handed transmission line (CRLH-TL) structure is proposed based on a general transmission line theory and the way to increase the relative operating bandwidth in the left-handed (LH) region and lower the LH operating frequency is illustrated. In addition, a new method to extract parameters and calculate the Bloch impedance of the structure is presented. Numerical results of the dispersion as well as the extracted parameters are given, which are calculated based on full-wave simulation. The present 2-D uniplanar CRLH-TL structure is applicable to 2-D left-handed materials in lower and wider LH frequency range. Supported by the National Natural Science Foundation of China (No. 60371010) (No. 60471037) (No. 63531020)     

应用LiNbO_3声表面波驱动的全光纤声光频移器

介绍一种工作在10.7MHz的全光纤声光频移器.它由在LiNbO_3基片上制作的叉指电极换能器产生的声表面波驱动.当驱动电功率1.5W时,频移光转换效率达35％.