爆磁压缩发生器通过脉冲变压器对脉冲形成线充电的理论分析

 将爆磁压缩等效为电流源的方法，对爆磁压缩发生器通过脉冲变压器对脉冲形成线充电进行了理论分析，得出爆磁压缩发生器在负载上产生电流波形（简称负载电流）为直线情况和任意电流波形情况下充电电流和充电电压的表达式。分析表明变压器耦合互感与负载电流随时间变化增长率是脉冲形成线充电的两个重要参数，脉冲形成线第一个充电电压峰值与变压器的耦合互感和负载电流波形斜率成正比，负载电流波形斜率的变化可以改变充电电压峰值的时间，斜率不断增加可以延长第一个充电电压峰值时间，从而可能增加充电电压的幅值，提高爆磁压缩发生器能量的利用效率。     

Ceramic Films via Organometallic Complex as Single Source Precursor

Fe2(CO)6(μ-S2) was used as a single source precursor in attempt to produce FeS film via MOCVD. Pyrolysis of Fe2(CO)6(μ-S2) at temperature below 500℃ produced Fe1-xS or Fe7S8 powder as indicated by its powder X-ray spectra. At 750 ℃, polycrystalline FeS powder was obtained. In film deposition, polycrystalline Fe1-xS or Fe7Ss films were obtained on Si(100) and Ag/Si(100) substrates below 500 ℃. SEM micrographs showed the film on Si(100) substrate containing whisker like grains. However, pillar like grains were obtained on Ag/Si(100) substrate.Deposition rates are also different for different substrates as evaluated by the thickness of the films, which were obtained by SEM micrographs of the cross section of the films. At 750℃, similar polycrystalline Fe1-xS or Fe7S8 film was obtained.     

Localization of diffusion sources in complex networks with sparse observations

Locating sources in a large network is of paramount importance to reduce the spreading of disruptive behavior. Based on the backward diffusion-based method and integer programming, we propose an efficient approach to locate sources in complex networks with limited observers. The results on model networks and empirical networks demonstrate that, for a certain fraction of observers, the accuracy of our method for source localization will improve as the increase of network size. Besides, compared with the previous method (the maximum–minimum method), the performance of our method is much better with a small fraction of observers, especially in heterogeneous networks. Furthermore, our method is more robust against noise environments and strategies of choosing observers.     

Estimating Precision in Functional Images

Abstract

Functional imaging of biologic parameters like in vivo tissue metabolism is made possible by Positron Emission Tomography (PET). Many techniques have been suggested for extracting such images from dynamic time-course sequences of reconstructed PET scans. Quantitating the precision of these estimates is important for drawing inferences on the biologic parameters. Analytic variance formulas are not immediate owing to the nonlinear methods used in extraction. The usual resampling approach is infeasible because each image reconstruction in PET is a computationally demanding solution to a high-dimensional linear inverse problem. We suggest an alternative simulation approach that approximates the distribution of reconstructed PET scans and performs a parametric bootstrap in the imaging domain. Results on a simplified model chosen to match the characteristics of PET reconstruction are very encouraging. Mixture analysis is used to estimate functional images; however, the suggested approach is general enough to extend to other techniques or imaging methods.     

Source Apportionment for the Zinc—Containing Component of Air Particulate Matter using Automated Electron Probe Micro Analysis of Individual Particles

Abstract

A methodology is described for the apportionment of zinc-containing particulate matter sampled in the vicinity of a zinc smelter to their corresponding sources in the factory. Bulk samples of particulate matter from six potential emission sources were analysed by automated electron probe microanalysis (EPMA) in order to characterize the individual particles. Based on a data set of relative peak intensities and with the aid of a binary clustering method, the most important particle classes were identified. They were used as a basis for the development of a set of disjunct identification rules (decision rules), which were able to describe the classes in a unique manner. Applying these rules upon ambient particulate data enabled the estimation of relative contributions of different types of zinc-containing particles. Evidence was found that a large number of particles was modified by a soil component or by gas phase reactions.     

浅海波导界面对点源振速方向的影响

采用“虚源法”分析计算了浅海波导环境中接收点处点源总振速方向与水平面夹角,侧重讨论确定性界面反射对总振速方向的影响。研究结果表明：总振速方向和接收点与声源的水平距离、两者深度,海底、海面特性以及声速剖面等有关。在等声速均匀浅海波导中,由于确定性界面反射的影响,当直达声掠射角为1°～50°时,合成总振速方向偏离直达声方向达1.5°～10.5°,声速剖面呈负梯度时,偏离程度更甚.     

Upgrade of beamline BL08B at Taiwan Light Source from a photon‐BPM to a double‐grating SGM beamline

During the last 20 years, beamline BL08B has been upgraded step by step from a photon beam‐position monitor (BPM) to a testing beamline and a single‐grating beamline that enables experiments to record X‐ray photo‐emission spectra (XPS) and X‐ray absorption spectra (XAS) for research in solar physics, organic semiconductor materials and spinel oxides, with soft X‐ray photon energies in the range 300–1000 eV. Demands for photon energy to extend to the extreme ultraviolet region for applications in nano‐fabrication and topological thin films are increasing. The basic spherical‐grating monochromator beamline was again upgraded by adding a second grating that delivers photons of energy from 80 to 420 eV. Four end‐stations were designed for experiments with XPS, XAS, interstellar photoprocess systems (IPS) and extreme‐ultraviolet lithography (EUVL) in the scheduled beam time. The data from these experiments show a large count rate in core levels probed and excellent statistics on background normalization in the L‐edge adsorption spectrum.     

Dielectric-Lined Multiwave Cerenkov Generators Producing High Power Millimeter Waves

This paper presents the concept of a Dielectric-lined Multiwave Cerenkov Generator(DMWCG) producing high power millimeter waves, which is investigated with a two and one half dimensional( ) electromagnetic relativistic Particle-in-Cell(PIC) simulation code. It is showed that the DMWCG can operate in a lower diode-voltage regime with much higher radiation efficiency as compared with the usual Multiwave Cerenkov Generator(MWCG). The simulation work indicates both the downshift of the wave frequency in the presence of the dielectric liner and the existence of the optima for the permittivity of the liner as well as for the magnitude of the guiding magnetic field. The required intensity of the guiding field is reduced with the introducing of the liner. The radiation is generated at the dominant frequency of 31.5GHz. The power level of 1.5GW is achieved, with radiation efficiency up to 15%. The features of parameter dependency are presented. And reasonable explanation is put forward. In addition, the enhanced propagation of the electron beam is studied in the presence of the dielectric liner.     

Existence and asymptotic stability for evolution problems on manifolds with damping and source terms

One considers the nonlinear evolution equation with source and damping terms