Separating Ag, B, Cd, Dy, Eu, and Sm in a Gd matrix using 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester extraction chromatography for ICP-AES analysis

The separation procedure for Ag, B, Cd, Dy, Eu and Sm as impurities in Gd matrix using ICP-AES technique with an extraction chromatographic column has been developed. The spectral interference of the Gd matrix on the elements was eliminated using a chromatography technique with 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A) as the mobile phase and XAD-16 resin as the stationary phase. Ag⁺, B₄O₇²⁻, and Cd²⁺ were eluted with 0.1 M HNO₃, while rare earth ions were not. The best eluent for separating Eu and Sm in the Gd matrix was 0.3 M HNO₃. The limit of quantitation for these elements was 0.6-3.0 ng mL⁻¹. The recovery of Ag, B, and Cd was 90-104% using 0.1 M HNO₃ as the eluent, while that of Eu, Gd, and Sm ranged from 100 to 102% with 0.3 M HNO₃. Dy was recovered quantitatively with 4 M HNO₃. The relative standard deviation of the methods for a set of three replicates was between 1.0 and 15.4% for the synthetic and standard Gd solutions. The proposed separation procedure was used to measure Ag, B, Cd, Dy, Eu, and Sm in a standard Gd solution.     

Synthesis of PI-88 analogue using novel O-glycosidation of exo-methylenesugars

Acid-promoted α-stereoselective O-glycosidation of 1-exo-methylenesugars was successfully applied to the synthesis of a PI-88 analogue. By using methanesulfonic acid as a promoter, 1′-C-methyl-α-disaccharides with p-methoxybenzyl protection were obtained in high yield. The sequence of selective deprotection and glycosidation provided 1-C-methyl-pentasaccharide efficiently.     

In Situ IR Spectroscopic Studies on Molybdenum Nitride Catalysts: Active Sites and Surface Reactions

Recent IR spectroscopic studies on the surface properties of fresh Mo₂N/88h392r/xxlarge947.gif" alt="gamma" align="MIDDLE" BORDER="0">-Al₂O₃ catalyst are presented in this paper. The surface sites of fresh Mo₂N/88h392r/xxlarge947.gif" alt="gamma" align="MIDDLE" BORDER="0">-Al₂O₃, both Mo^{88h392r/xxlarge948.gif" alt="delta" align="BASELINE" BORDER="0">+} (0<88h392r/xxlarge948.gif" alt="delta" align="BASELINE" BORDER="0"><2) and N sites, are probed by CO adsorption. Two characteristic IR bands were observed at 2045 and 2200 cm^-1, due to linearly adsorbed CO on Mo and N sites, respectively. The surface N sites are highly reactive and can react with adsorbed CO to form NCO species. Unlike adsorbed CO on reduced passivated one, the adsorbed CO on fresh Mo₂N/88h392r/xxlarge947.gif" alt="gamma" align="MIDDLE" BORDER="0">-Al₂O₃ behaves similarly to that of group VIII metals, suggesting that fresh nitride resembles noble metals. It is found that the surface of Mo nitrides slowly transformed into sulfide under hydrotreating conditions, which could be the main reason for the activity drop of molybdenum nitride catalysts in the presence of sulfur-containing species. Some surface reactions, such as selective hydrogenation of 1,3-butadiene, isomerization of 1-butene, and hydrodesulfurization of thiophene, were studied on both fresh and reduced passivated Mo₂N/88h392r/xxlarge947.gif" alt="gamma" align="MIDDLE" BORDER="0">-Al₂O₃ catalysts using IR spectroscopy. The mechanisms of these reactions are proposed. The adsorption and reaction behaviors of these molecules on fresh molybdenum nitride also resemble those on noble metals, manifesting the unique properties of fresh molybdenum nitride catalysts. Mo and N sites are found to play different roles in the adsorption and catalytic reactions on the fresh Mo₂N/88h392r/xxlarge947.gif" alt="gamma" align="MIDDLE" BORDER="0">-Al₂O₃ catalyst. Generally, Mo sites are the main active sites for the adsorption and reactions of adsorbates; N sites are not directly involved in catalytic reactions but they modify the electronic properties of Mo sites.     

Note on the ab initio PUHF treatment of open-shell systems

Ab initio projected-unrestricted Hartree-Fock calculations have been carried out on a number of excited and ionic states of the water molecule. Results have been compared with large-scale CI calculations, with IVO calculations, and with those of Mrozek and Golebiewski obtained by the 2 × 2 rotation method applied to orbitals. It is concluded that the PUHF method may provide the most useful alternative to large-scale CI for calculating properties of open-shell systems. But it will not be generally useful for calculating spectral transition energies.     

The American (USA) perspective six years after implementation of CLIA'88 (Federal) regulations

 On September 1, 1992 all testing sites in the United States were required to comply with the Clinical Laboratory Improvement Amendments of 1988 (CLIA'88). These regulations, based on both total quality management (TQM) and continuous quality improvement (CQI) principles, reshaped the environment for more than 90% of laboratories. CLIA'88 represented a revolutionary change by imposing universal, uniform regulations based on test complexity for all sites examining materials derived from the human body for the purpose of providing information for the diagnosis, prevention, or treatment of disease. CLIA'88 specifies minimum requirements for personnel, quality control, and proficiency testing (PT). In addition, laboratories are required to follow manufacturers' directions and comply with other specified good laboratory practices. PT is mandated for most of the frequently run analyses and quality assurance requirements integrate the principles of CQI as well as TQM into the regulatory process. Biannual inspection is integral to CLIA'88, however, laboratories can choose other federally approved ("deemed") professional organizations, such as the Commission on Office Laboratory Accreditation, the College of American Pathologists, or the Joint Commission on Accreditation of Healthcare Organization, having standards that meet or exceed those of CLIA'88. CLIA'88 has still not been finalized. This article discusses the impact and changes since CLIA's implementation in 1992. Received: 5 October 1998 · Accepted: 20 October 1998     

A new theoretical approach to the empirical resonance energies of the aromatic hydrocarbons

In the framework of the Hückel MO approximation, the differences in total binding energy between a given molecule and the corresponding distorted Kekulé-type structure are calculated for a variety of benzenoid hydrocarbons. The total binding energy is assumed to be given by the sum of the 88j6287438g48/xxlarge960.gif" alt="pgr" align="BASELINE" BORDER="0">-electron and 88j6287438g48/xxlarge963.gif" alt="sgr" align="BASELINE" BORDER="0">-electron binding energies. It is shown that there is a good linear relationship between the calculated differences in total binding energy and the 88j6287438g48/xxlarge960.gif" alt="pgr" align="BASELINE" BORDER="0">-electron delocalization energies (DE) as obtained by using the simple Hückel MO method. This provides a physical basis for the use of the 88j6287438g48/xxlarge960.gif" alt="pgr" align="BASELINE" BORDER="0">-electron DE as a theoretical index to the empirical resonance energy (RE). Further, by examining the changes in 88j6287438g48/xxlarge960.gif" alt="pgr" align="BASELINE" BORDER="0">-electron binding energy between a given molecule and the corresponding distorted Kekulé-type structure, it is concluded that in benzenoid hydrocarbons the main contributor to the RE is not the 88j6287438g48/xxlarge960.gif" alt="pgr" align="BASELINE" BORDER="0">-electron DE but the compressional energy of 88j6287438g48/xxlarge963.gif" alt="sgr" align="BASELINE" BORDER="0"> bonds.     

A hidden rule in metal sulfide fullerenes: A case study of Sc2S@C88

To elucidate the structure of a compound is a necessary step for its practical applications. To study the structure and properties of metal sulfide fullerene Sc₂S@C₈₈ detected by mass spectrometry, 11 194 isomers of C₈₈ and 33 isomers of Sc₂S@C₈₈ were systematically examined by density functional theory calculations. The calculations show that the two lowest‐energy isomers are Sc₂S@C₈₈:81 738 (IPR‐35) and Sc₂S@C₈₈:81 735 (IPR‐32), followed by Sc₂S@C₈₈:81 729 (IPR‐26), Sc₂S@C_88:81 712 (IPR‐9), and Sc₂S@C_88:81 733 (IPR‐30). Structural analysis shows that the first two energetically favored isomers are bridged by the third and fifth energetically favored isomers, which can transfer into each other via direct Stone–Wales rotation. The calculations of temperature effect show that the first two favored isomers become dominant forms of Sc₂S@C₈₈ with decreasing temperature and may coexist in the soot. This structural convertibility among favored isomers of Sc₂S@C₈₈ suggest a hidden rule that birds of a feather flock together in metal sulfide fullerenes. This rule may decrease the range of candidate cages for the structural identification of a metal sulfide fullerene. IR spectra are simulated for helping the future experimental identification of Sc₂S@C₈₈.     

铬-对苯二甲酸MOF的框架异构：MIL-88B(Cr)和MIL-101(Cr)

可以通过简单地控制乙酸浓度的方法,在相似的水热合成条件下合成2种同一家族的金属有机框架材料(MOFs):MIL-88B(Cr)和MIL-101(Cr)。在相对较低的乙酸浓度下,可以得到平均粒径为100 nm的MIL-101(Cr),并拥有很高的BET比表面积(3543 m^2·g^-1)。而在相对较高的乙酸浓度下,则可得到另一种具有“呼吸”特性结构的MOF——MIL-88B(Cr)。利用粉末X射线衍射、扫描电镜、N2吸附-脱附分析、热重分析等对它们的结构、形貌、孔隙率等性质做了详细的分析。     

Synthesis of N-TiO2@NH2-MIL-88(Fe) Core-shell Structure for Efficient Fenton Effect Assisted Methylene Blue Degradation Under Visible Light

Core-shell TiO₂-based photocatalysts with specific composition, morphology, and functionality have attracted considerable attention for their excellent degradation properties on organic pollutants via a photocatalytic oxidation process. Herein, a N-TiO₂@NH₂-MIL-88(Fe) core-shell structure was prepared by coating NH₂-MIL-88(Fe) on nitrogen-doped TiO₂(N-TiO₂) nanoparticles. Introduction of heteroatom nitrogen to pure TiO₂ expands the spectral response range, leading to enhanced quantum efficiency of photocatalyst. Furthermore, loading NH₂-MIL-88(Fe) on N-TiO₂ improved the adsorption ability of the nanocomposites due to the porous tunnels of NH₂-MIL-88(Fe). The resulted core-shell N-TiO₂@NH₂-MIL-88(Fe) nanocomposites realized the transfer of photo excited electrons from N-TiO₂ to NH₂-MIL-88(Fe) rapidly, partially reduced Fe³⁺ to Fe²⁺ in NH₂-MIL-88(Fe), and further enhanced the Fenton effect on efficiently degrading methylene blue dye(MB) under visible light(λ ≥ 420 nm) with the assistance of H₂O₂.