基于矢量平均的信道估计算法

提出一种适用于DS-CDMA无线通信系统的低计算量而性能良好的信道估计算法。在DS-CDMA系统中，当接收信号经过解扩或多用户检测等时域预处理后，可以认为干扰大大减弱、期望信号在处理后的信号中占主要地位。这样，用预处理后信号相关阵的最大特征值对应的特征矢量可以很好地近似期望信号的信道矢量。但是，直接特征分解需要很大的计算量，特征跟踪计算量较低，但瞬态性能较差。本文提出一种基于相关矩阵列矢量平均的信道估计算法，该算法不需要特征分解或跟踪。仿真结果表明：新算法在降低计算量的情况下可以获得同直接特征分解方法几乎相同的性能。     

线性时变系统的区间稳定性与鲁棒稳定性

本文应用向量比较定理研究线性时变系统的区间稳定性和具非线性时变摄动的线性时变系统的鲁棒稳定性，所得的新结果包含文献的一些主要结果作为特例，本文的研究方法说明向量比较方法是分析区间稳定性和鲁棒稳定性的一种自然而有力的工具。     

Numerical modelling for scattering of waves in three-dimensional cracked material

In this paper, a mathematical model is proposed for the problem of the scattering of plane waves in a three-dimensional cracked materials. Instead of obtaining closed-form solutions as in conventional theoretical analysis methods, this approach, called the Equivalent Nodal Force (ENF) method formulates the mechanical effects of cracks as an equivalent nodal force in a numerical procedure, and physically translates cracked material into an equivalent continuous one. Several mechanical relations between waves and cracks are evident from this method. Also the results of several numerical calculations are presented and these are compared with those obtained by the conventional methods.     

RLL码的计算机辅助设计

本文着重讨论计算机辅助设计RLL码的具体实现问题.该过程首先根据RLL码两个参数d,k确定一个编码率p/q,然后构造出RLL码的高阶状态转换-输出符号矩阵并求相应的近似特征向量.最后通过状态分裂和状态归并过程,即可得到一个满足d,k约束的编码输出表.其中状态转换-输出符号矩阵为实现计算机辅助设计RLL码提供了有效的数据结构,而且要优化RLL码编码器,就必须有选择地进行状态分裂.     

一种新型微处理器功能验证

文中介绍一种新型微处理器的验证方法，并对相关的一些验证策略进行深入的讨论。     

Achievement of specificational information usage with true and false feedback in learning a visual relative-mass discrimination task.

Participants' usage of informational variables in learning visual relative-mass discrimination in collisions was tracked by means of PROBIT correlations. Four groups received feedback that was true or accorded with either of three nonspecificational cue variables. A majority in each group adopted the feedback, but several participants defied the false feedback. Unlike in previous research, the fit to data of the relative-mass invariant could not be bettered by post hoc linear combinations of the cues. Discriminability was lower in the use of the invariant. Analytic complexity was rejected as an explanation for discriminability differences. A "smart mechanism" for pickup of the relative-mass invariant was developed as an extension of G. Johansson's (1950/1994) vector model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Two-tier architecture for unconstrained handwritten character recognition

In this paper, we propose an approach that combines the unsupervised and supervised learning techniques for unconstrained handwritten numeral recognition. This approach uses the Kohonen self-organizing neural network for data classification in the first stage and the learning vector quantization (LVQ) model in the second stage to improve classification accuracy. The combined architecture performs better than the Kohonen self-organizing map alone. In the proposed approach, the collection of centroids at different phases of training plays a vital role in the performance of the recognition system. Four experiments have been conducted and experimental results show that the collection of centroids in the middle of the training gives high performance in terms of speed and accuracy. The systems developed also resolve the confusion between handwritten numerals.     

基于移动端多天线系统的无线衰落信道模型

根据当前无线移动通信对多天线移动接收端性能仿真的要求，讨论并建立了适于空时信号处理的移动端矢量信道模型。通过分析无线移动信道特点。研究了影响接收信号幅度相位的诸多因素，建立了相应的数学模型。并对随机参数选取进行了探讨。其中考虑到移动端接收信号到达角扩散的特点，采用GBSB椭圆模型产生了适于移动端接收信号仿真的随机角度，改进了一种瑞利衰落生成算法。最后信道的数值仿真结果符合理论和经验。同时，通过TD-SCDMA系统链路级仿真，也证明了该信道模型的有效性。     

Ultrahigh-performance FFTs for the CRAY-2 and CRAY Y-MP supercomputers

In this paper a set of techniques for improving the performance of the fast Fourier transform (FFT) algorithm on modern vector-oriented supercomputers is presented. Single-processor FFT implementations based on these techniques are developed for the CRAY-2 and the CRAY Y-MP, and it is shown that they achieve higher performance than previously measured on these machines. The techniques include (1) using gather/scatter operations to maintain optimum length vectors throughout all stages of small-to medium-sized FFTs, (2) using efficient radix-8 and radix-16 inner loops, which allow a large number of vector loads/stores to be overlapped, and (3) prefetching twiddle factors as vectors so that on the CRAY-2 they can later be fetched from local memory in parallel with common memory accesses. Performance results for Fortran implementations using these techniques demonstrate that they are faster than Cray's library FFT routine CFFT2. The actual speedups obtained, which depend on the size of the FFT being computed and the supercomputer being used, range from about 5 to over 300%.     

三维合成炮叠前深度偏移

对国际上标准的SEG/EAEG模型进行了三维合成炮叠前偏移研究。与三维单炮叠前深度偏移不同 ,三维合成炮叠前偏移有一个叠前数据的合成过程 ,由于合成后数据量大大减少 ,所以合成炮偏移的计算量要比单炮偏移小得多。阐述了三维合成炮叠前偏移的实现过程 ,给出了相应公式。对SEG/EAEG盐丘模型的一个数据集进行了MPI并行计算 ,取得了良好的成像效果。所作的较多计算表明了三维合成炮叠前偏移的正确性和有效性 ,这为野外实际数据的三维叠前深度偏移提供了另一条有效途径。