Twin screw granulation – review of current progress

Twin screw granulation (TSG) is a new process of interest to the pharmaceutical community that can continuously wet granulate powders, doing so at lower liquid concentrations and with better product consistency than found by a high shear batch mixer. A considerable body of research has evolved over the short time since this process was introduced but generally with little comparison of results. A certain degree of confidence has been developed through these studies related to how process variables and many attributes of machinery configuration will affect granulation but some major challenges still lay ahead related to scalability, variations in the processing regimes related to degree of channel fill and the impact of wetting and granulation of complex powder formulations. This review examines the current literature for wet granulation processes studied in twin screw extrusion machinery, summarizing the influences of operational and system parameters affecting granule properties as well as strives to provide some practical observations to newly interested users of the technique.     

低密度微泡沫压井液的研究与应用

吐哈油田部分区块地层压力系数小于0.9,常规水基压井液对储层伤害大,若使用油基压井液成本高,环境污染严重。通过实验优选出了一种低密度水基微泡沫压井液。该压井液具有密度低、泡沫强度高、稳定性好、携砂能力强等优点。现场应用表明,低密度微泡沫压井液稳定时间大于48 h,密度在0.70~0.99 g/cm3之间可调,抗油污染能力强,抗油大于8%,抗温在100℃以上,岩心污染后渗透率恢复值大于80%;并且施工方便,成本低,具有储层保护能力,使用微泡沫压井液的井表皮系数在0.20~2.34之间。     

可循环泡沫钻井液在宝302井欠平衡井段的应用

介绍了可循环泡沫钻井液的配方，性能及在宝302井欠平衡井段中的应用情况，结果表明该体系悬浮和携岩能力强，抗高温，抗污染效果好，能够满足宝南区块深井欠平衡压力钻井的需要，且保护油气层效果好，同时，这也是国内首次将可循环泡沫钻井液成功应用于井泥岩及煤层井，拓宽了泡沫钻井液的应用范围。     

新型水力泵排液工艺

酸化或压裂是改造油气层措施中常规的也是最有效的方法之一。问题是酸化或压裂结束后,采取何种工艺及时返排出残酸,减少残液二次沉淀对油层的污染。同时常规TCP(油管传输负压射孔)+DST(地层测试器)二联作测试工艺在遇到低压、低渗等非自喷油层时,要想取准油层产能、压力,收集到有代表性产液样品资料,困难很大。针对以上问题,大港油田钻采院研制了新型水力喷射泵,该泵可与酸化、压裂及射孔+测试等工艺配套使用,在实现一趟施工管柱同时完成几项工作的同时,利用喷射泵深抽、连续强排的技术特点,取得了较好效果。     

泡沫铝的动态压缩性能和吸能性研究

通过测量泡沫铝在动态和准静态压缩条件下的应力 -应变曲线 ,研究了泡沫铝的准静态和动态压缩行为以及不同应变条件下的吸能性 ,并对其应变率效应进行了分析。结果表明 ,在高应变速率和准静态压缩下 ,泡沫铝的σ -ε曲线均表现出弹性变形段、平缓段和密实段三阶段特征 ;泡沫铝的压缩性能具有明显的应变速率敏感性 ,随应变速率的提高 ,流动应力上升 ,吸能性升高     

THE LAURENCE BISHOP SILVER MEDAL INAUGURAL LECTURE THE IMPACT OF SCIENTIFIC MEASUREMENT ON THE BREWING PROCESS

Laurence Bishop's contribution to the brewing industry over more than 50 years of research endeavour and committee activities is reviewed. Three research areas — prediction of extract, the effect of turbidity on yeast activity during fermentation and the development of a 3-vessel fermentation system — are used to highlight his achievements. Five topics with which the author was intimately involved, three of which were connected with Laurence Bishop's own researches, are used to describe the author's activities. These concerned the assessment of beer foam, the prediction of beer stability, the assessment of the bittering value of hops, time course changes in the analytical characteristic of an ale fermentation and the use of fractional factorial designs to facilitate experimental programmes.     

高能气体压裂联作技术进展

国内高能气体压裂增产技术已经由单一的有壳弹、无壳弹、液体药、可控脉冲等高能气体压裂,进展到与射孔、水力压裂、酸化、化学解堵等技术相联作的综合压裂阶段。分别对高能气体压裂与射孔、水力压裂和化学解堵等联作技术的基本原理、现场试验、作业效果等进行了介绍。高能气体压裂已发展成一种基本成熟的、综合性油气田增产改造新技术。     

Prediction of foam growth and its nucleation in free and limited expansion

The influence volume approach (IVA) is often utilized for modeling the mass transfer process dictating bubble growth dynamics in physical foaming. However, the assumed concentration profile in the IVA method is only valid when the changes in dissolved gas concentration are small (less than 5%). In addition, the validity of the IVA method is difficult to justify in chemical foaming applications because of the difficulties involved in defining the dissolved gas concentration profile.In the present work, we define two distinct stages of bubble growth for physical foaming. These two stages are termed as free and limited expansion and are controlled by the bubble nucleation rate. Bubble nucleation is assumed to occur only in the free expansion stage. In this stage, the bubble pressure drops substantially from an initially high pressure in the supersaturated state while the dissolved gas concentration changes very little. The second stage of our two-stage mass transfer model is termed the limited expansion stage and accounts for bubble growth in the late stages of foam evolution, when the pressure changes become small. However, in the limited stage of bubble growth the dissolved gas concentration drops significantly, as the available dissolved gas is depleted. To summarize our two-stage mass transfer model of foam expansion, the pressure difference between the bubble phase and the liquid phase is the primary mechanism for driving mass transfer in the early (free) stages of foam growth and the concentration difference is the driver for bubble growth in the late (limited) stages of growth. The first stage can be regarded as the nucleation stage and it is relatively short; while the second stage can be regarded as the bubble growth stage and is much longer. Most of the bubble volume expansion takes place in the second stage.The concentration gradient at the bubble edge, which is often ignored in other models, is analyzed in detail in this paper. The details of our novel mass transfer model are also presented.     

吐哈油田葡北3-12井超长封固段固井技术

葡北3-12注气井位于吐哈盆地葡北构造带中断葡北1号构造．井深为3610m。针对该区块地层承压能力低，易漏失，油气水窜严重，常规固井方法无法满足固井要求的问题，该井采用三段三凝制、常规水泥浆和泡沫水泥浆体系固井，并采用重钻井液顶替技术．降低施工压力。该技术能保证固井候凝过程中井底压力平衡，施工安全。现场应用表明，采用常规水泥浆和泡沫水泥浆固井技术．提高了低压易漏井、长封固井段的固井质量，解决了水泥返高不足的问题；并通过一次常规固井工艺实现了全井封固，简化了施工工艺，节约了成本，经济效益和社会效益十分显著。该井封固优质段累计达2600m，优质率达85％，固井结果良好。     

Mechanical properties and thermal stability of rice husk ash filled epoxy foams

Mechanical properties and thermal stability of epoxy foams filled with white and black rice husk ash were studied. Epoxy foams were prepared from a commercial system and filled with different amounts of both the ashes (0, 6.8, 12.8, 18.0, and 22.7 wt %). The incorporation of both the ashes modified the final morphology of the foam, decreasing the average cell size and increasing the number of cells per volume unit. For all filler percentages used, the specific modulus and strength results showed that the white ash is more effective as reinforcing agent than the black ash. The initial degradation temperature was not affected by the content and type of ash used as the filler. The integral procedure decomposition temperature, weight loss, and char residue results were related to the ash type and atmosphere used in the thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006