Dynamic elastic-plastic buckling phenomena in a rod due to axial impact

Dynamic elastic-plastic buckling phenomena which might develop in a rod from an axial impact loading are studied in order to identify the conditions for quasi-static behaviour. A discrete model for dynamic elastic-plastic buckling, which retains the axial and the lateral inertia forces, is proposed, and the relationship between the model parameters and the characteristics of an actual structure is given. Examples of different external loadings and boundary conditions are considered in order to clarify the influence of elastic-plastic axial wave propagation on the buckling process. The critical time for the initiation of buckling is obtained and the post-buckling behaviour of the model is analysed. Particular attention is paid to the role of the striking mass on the characteristics of the buckling process and on the development of the buckling shape. The numerical study reveals that the inertia of the striking mass affects considerably the development of the buckling shape causing different patterns of axial strain distributions at the initiation of buckling. The comparisons which are made between the model predictions and some previously published experimental data show that the buckling process is governed by the impact velocity as well as by the external loading history provided by the experimental technique.     

Some experimental findings in compression-after-impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/epoxy flat plates

Compression-after-impact (CAI) tests have been conducted for quasi-isotropic thick plates with 48 plies by using the NASA method and on plates with 32 plies by using the SACMA method. Specimens are made of CF/PEEK (APC-2) and conventional CF/epoxy for the NASA plates and CF/epoxy for the SACMA plates. In the NASA CAI tests, the sequence of delamination buckling and its propagation is clearly revealed through various experimental techniques. One major technique is moiré topography, and the other is thermo-mechanical stress analysis with a high-accuracy infrared sensor. The arrest of delamination propagation just before catastrophic failure due to high fracture toughness is clearly captured by the moiré camera. This behavior provides good CAI values of CF/PEEK. The initial buckling properties of the delaminated region by the impact are then extensively discussed. Numerical predictions of initial buckling stress have been obtained by modelled geometry of the delaminated region simplified from its precise structure clarified by ultrasonic C-scanning. They agree fairly well with the experimental results. The in-plane stress distribution in the delaminated region before initial buckling is measured by an infrared stress graphic system. This compared favorably with finite element predictions. Two types of symmetric buckling modes with respect to the central plate surface, twin and single peak ones, are experimentally captured.     

钻井井架力学性能分析

钻井井架作为钻机系统设备中的关键部分,其力学性能直接关系到整套钻机系统的安全生产。文章推导了常用于分析钻井井架力学性能的理论,即线性屈曲、几何非线性和双重非线性理论。提出同时用这三种理论对钻井井架进行综合比较分析,从而合理地预见井架力学性能的方法。以A形钻井井架为例,进行了详细的分析,得到了井架的失稳形式、极限承载、破坏特征及薄弱部位,为钻井井架的设计、优化与评定提供了参考。     

Buckling optimization of hybrid-fiber multilayer-sandwich cylindrical shells under external lateral pressure

This paper describes a method of analyzing the maximum buckling strength of hybrid-fiber multilayer-sandwich cylindrical shells under external lateral pressure with respect to fiber orientations and weighting factors. Formulae for optimizing these parameters are presented and conditions for the application of these formulae are discussed. A discriminant is derived for assessing whether the hybrid sandwich cylindrical shells for given different unidirectional composites should reach the extreme value of critical pressure.     

卷边槽钢压杆考虑板组约束作用的屈曲系数

卷边槽钢压杆的局部屈曲具有相关性。《冷弯薄壁型钢结构技术规范》(GB50018-2002)提出适用于各种不同截面的板组约束系数的统一计算公式来考虑这种相关性。但由于板组组成的多样性,其是否合理,有待于进一步研究。借助ANSYS有限元分析软件,对卷边槽钢压杆局部屈曲进行分析,得到考虑板组约束作用的屈曲系数,并和国内外规范进行比较。结果表明,计算结果和英国规范吻合较好,我国规范偏于安全较多。借鉴英国规范的形式,给出考虑板组约束作用的屈曲系数的计算公式,这些公式可供进一步修订规范时参考。     

Criteria of dynamic buckling estimation of thin-walled structures

The paper deals with dynamic buckling of thin-walled structures (plates and beam-columns with open cross-section) subjected to compressive rectangular pulse loading. The local, global and interactive dynamic buckling was analysed. Author proposes the new criterion for critical amplitude of pulse loading leading to stability loss. The proposed criterion is a modification of quasi-bifurcation criterion formulated by Kleiber, Kotula and Saran. Results obtained using proposed criterion were compared with other well-known criteria (Volmir (V) and Budiansky–Hutchinson (B–H) criterion).     

安全壳钢衬的初始后屈曲分析

基于Ｄｏｎｎｅｌｌ的非线性板壳理论，认为钢衬壳是一种有特殊缺陷形状的钢衬板，用初始后屈曲渐进分析理论，研究了在温度应力作用下缺陷钢衬板即钢衬壳的初始后屈曲性态。计算了一个四点铆固钢衬壳模型，同时给出了铆钉间距等参数对钢衬壳屈曲极值温度的影响。     

榫边扣合管状密闭输送带的制作及其质量优化

对用于制药、精细化工、建材业等输送松散及粉、粒物料不污染环境的榫边扣合管状密闭输送带的结构特点、技术要求、制造工艺和优化制品质量的技术措施及效果进行了实验探讨。     

轴向冲击下波纹腹板梁的失稳控制和能量吸收

针对Sine波纹腹板梁结构,通过设计其初始振幅缺陷,控制不同波形阶数下波纹梁的失稳模态,引导上下翼板按预期渐进、稳定、可重复的压溃变形模式发展.采用Abaqus/Explicit中的显式动力学方法数值模拟初始振幅缺陷与比吸能(Specific Energy Absorption,SEA)的关系.通过对比低阶、中阶和高阶波形的载荷-位移曲线说明波形阶数对吸能特性和失稳控制的影响.结果表明:对于给定的波形阶数,存在初始振幅缺陷的临界值使Sine波纹腹板梁结构达到预期的临界失稳状态,同时SEA最大;初始振幅缺陷越大,失稳控制越容易,但吸能效果随之降低.     

Equilibrium equations for nonlinear buckling analysis of drill-strings in 3D curved well-bores

With the development of drilling technology, the oil/gas well has evolved from its early vertical straight form to the inclined, horizontal, plane curved, or even 3D curved well-bore. Understanding of the buck-ling behavior of a drill-string in a well-bore is crucial for the success of a drilling operation. Therefore, equilibrium equations for analyzing the buckling behavior of a drill-string in a 3D curved well-bore are required. Based on Love’s equilibrium equations for a curved and twisted rod in space, ...