一种新型彩色三维光学成像系统

提出一种新型三维彩色光学数字成像系统。此系统利用投影结构光对现实世界中的物体进行数字化，同时得到对应的彩色纹理。详细介绍了系统的硬件设计和软件体系结构设计，得到物体彩色纹理的两种不同方法；直接获取和从编码条纹中提取，给出了用该系统得到的实验结果并简单评价了系统的性能。此系统在反求工程、影视制作、三维游戏制作、医学应用等方面有远大的应用前景。     

Structural and Electrical Characteristics of Pb（Zr0.53,Ti0.47）O3 Thin Films Deposited on Si （100） Substrates

Pb(Zr0.53, Ti0.47)O3 (PZT) films were directly deposited on Si substrates without a buffer layer by pulsed laser deposition. Only(110)-oriented PZT peaks (other than Si substrate peaks) were observed from the XRD data. The electrical properties of the PZT/Si capacitor were characterized in terms of both the capacitance versus voltage (C-V) and current versus voltage (I-V) measurements. The clockwise trace of the C-V curve shows ferroelectric polarization switching, as is expected. From the I-V curves, the Schottky emission and spacecharge-limited-current behaviour are found to be the mainly leakage current mechanism in a certain electric field range in the negative and positive bias, respectively.     

Theoretical analysis of the acoustical characteristics of suspended micro-perforated panel absorbers

Sound absorption characteristics of suspended micro-perforated panel absorbers were investigated theoretically. The method of half thickness model of such panel absorber with quadripole analysis was used for predicting its acoustic performance. The analysis results show that the predictions agree well with the measurements of absorption in the reverberation chamber. The factors affecting the absorption characteristics for such absorbers were discussed, and some rules as design guidelines were given.     

机载海洋激光测深系统参量设计与最大探测深度能力分析

详细讨论了机载海洋激光测深系统最大测量深度与相关因子之间的关系，并利用最小可探测信噪比为判据，对机载海洋激光测深系统在白天和晚上工作进行了数值模拟，通过比较最大测量深度与激光脉冲峰值功率、接收视场角、接收口径和光谱接收带宽等关系，确定了系统的主要参量。以确定的参量建立的系统具有白天49m和晚上65m的最大测深能力，可完全满足在沿岸带以及岛礁的测量要求。     

Viscosity Characteristic in Metallic Melts with Medium／Short-Range Order Structures

Viscosities and liquid structure of alloys Cu75Al25, Cu87Sn13 and Al-12.5%Si and pure metals Cu and Sn are investigated by using torsional oscillation viscometry and high temperature x-ray diffractometry. The viscosities of pure metals and eutectic alloy melts along with the short-range order structure are found to follow the Arrhenius law in a wide range of temperature above the liquidus. The breakpoints in Arrhenius plots emerge when the structures of alloy melts are transformed from the medium-range order structure to the short-range order structure. It has been found that the change of the viscosity of the metallic alloys is a characteristic of microstructure transformation in the related melts.     

特征向量法建模与理论

本文从矩阵理论的角度，介绍特征向量法(亦称特征根法)建模过程中所遇到的理论问题。     

甲醇燃料车尾气净化催化剂的研究Ⅱ.甲醇深度氧化用银催化剂上吸附物种的原位红外研究

利用原位红外技术研究了ＣＨ３ＯＨ，ＣＯ，Ｏ２等在５％Ａｇ／γＡｌ２Ｏ３上的吸附情况及ＣＨ３ＯＨ和Ｏ２共吸附时表面物种的变化．结果表明，在表面纯净的Ａｇ／γＡｌ２Ｏ３催化剂上，甲醇的解离吸附仅发生在γＡｌ２Ｏ３上；表面预吸附氧后，可大大增强Ａｇ对ＣＨ３ＯＨ的解离吸附，当吸附的［ＣＨ３Ｏ］与［Ｏ］在Ａｇ／γＡｌ２Ｏ３上相互作用时，出现吸附态甲醛、甲二氧基、甲酸根等中间物种．Ｏ２在Ａｇ／γＡｌ２Ｏ３上存在非解离吸附（Ｏ－２），在真空中较易脱附，但在氧气氛下可于１００℃时稳定存在．     

弱混合序列最大值与最小值的联合极限分布

本文讨论在弱混合条件下同分布和更一般序列的最大值与最小值的联合极限分布,改进和推广了[1]中关于平稳序列的结果。     

基于二次插值的非饱和土壤水流问题的特征差分方法及数值模拟

本文针对一类非饱和土壤水流问题,提出了基于二次插值的特征差分格式,得到了严谨的L2模误差估计.并作了数值试验,指明方法的有效性.     

电场喷射活细胞

一般人使用喷墨打印机来打印文件和图片＋这种技术将细小的彩色墨滴从喷嘴中挤压出来．然而，在电子学和医学中正越来越多地用这种技术产生小体积的液滴．例如，使用压电晶体从一根针头中挤压出含有细胞的溶液，产生活细胞的二维和三维图像．但是细胞液滴的大小受到针头直径大小的限制＋因而这种方法不能产生小于100μm同左右的液滴．这意味着很难制成带有细微特征的小的生物组织．