栲胶法变换气脱硫工艺

介绍了栲胶法脱硫的原理，工艺流程及规整填料在脱硫塔中的应用。     

发展我国冻干蔬菜产业大有可为

本文介绍了真空冷冻干燥食品的发展现状、特点及其工艺流程 ,着重讨论了发展冻干食品工业的广阔前景     

Effects of viscosity on the bitterness and astringency of grape seed tannin

To examine the separate effects of viscosity and sweetness on astringency, aqueous solutions of grape seed tannin (GST) were thickened with carboxymethyl cellulose (CMC) from 2 to 45 cP (experiment 1) or sweetened with 0 to 1.8 g/L aspartame (experiment 2). Trained subjects continuously rated astringency and bitterness in duplicate. Subjects were categorized by the salivary flow induced by citric acid and ability to taste n-propyl thiouracil (PROP). In experiment 1, maximum intensity and total duration of astringency were significantly decreased as viscosity rose, although time to maximum intensity of astringency was not affected. Maximum intensity and total duration of bitterness were not significantly affected by increasing viscosity; however, the onset of bitterness was significantly delayed. In experiment 2, increasing sweetness had no affect on any astringency parameter, although maximum intensity of bitterness was significantly decreased. Neither PROP nor salivary flow-status had any effect on perception of bitterness or astringency in either experiment.     

Temperature and pressure effects on supercritical CO2 extraction of tomato seed oil

Tomato seed oil was extracted with supercritical carbon dioxide in a semibatch-flow extractor within the temperature range 313–343 K and the pressure range 10.8–24.5MPa. The extraction rates increased with pressure, but decreased with temperature increase because of the variation in solvent density and resultant differences in oil solubility. The fatty acid composition of the extracted oil was similar to that of soybean oil.     

掺炼糠醛抽出油生产高质量沥青

掺炼糠醛抽出油，改变了丙烷脱沥青装置原料性质，通过调整部分操作参数，可提高轻脱油和重脱油的收率，改善脱油沥青质量，直接生产出合格的高标号道路沥青。     

Tannins/melamine–urea–formaldehyde (MUF) resins substitution of chrome in leather and its characterization by thermomechanical analysis

A new sulfonated melamine–urea–formaldehyde (MUF) resin of relatively low melamine content, prepared according to a sequential formulation, has been shown to be highly effective when coupled with different natural vegetable tannins to produce leather with the same good characteristics of leather prepared with chrome salts. In particular, the antishrinkage effectiveness of the leather prepared according to the new approach is comparable to that obtained with chrome tanned leathers. The comparison of the traditional leather shrinkage temperatures test method with a new thermomechanical analysis (TMA) test method in tension yields thermograms presenting three major modulus of elasticity (MOE) peaks. These are closely connected to molecular level phenomena determining the shrinkage temperature of leather. The three determining parameters appear to be as follows: (1) The average value of the temperatures at which the three MOE peaks occur: the higher the value of this average, the lower is the shrinkage of leather. (2) The average of maximum MOE values of the TMA peaks: the higher this average is, the better is the leather in regard to antishrinkage effectiveness. This means the leather maximum MOE at each peak is a measure of the resistance to the contraction force induced by heat. (3) The relative intensity of the first TMA peak in relation to the second: the higher the value of the MOE for the first TMA peak is in relation to the second peak, the lower the leather shrinkage appears to be. However, it has not been possible to better define or quantify this latter effect. This new TMA test method in tension has also yielded a mathematical relationship correlating the thermogram peak temperatures and MOE averages with the traditional shrinkage temperature to a high degree of confidence. A previous TMA test method, in compression, has proven to yield more problematic and finally not very reliable results when one needs to apply it to a wide variety of different cases. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1889–1903, 2003     

天然调味料──酵母抽提物的研究进展

着重论述了酵母抽提物的特性、在食品中的应用前景、制造方法、工业化生产中存在的问题及其解决方法，并对酵母抽提物的发展方向作一展望。     

纤维表面处理对植物纤维增强水泥的物理力学性能影响

植物纤维增强水泥的力学性能具有湿敏感性，随湿度增加弯曲强度下降幅度较大。本文工作采用的几种浸渍处理纤维表面的方法，有效地改善了这种状况，其中一种经处理的纤维增强水泥较没有处理的对比试样在饱水状态下的弯曲强度提高了67％，气干状态提高了18％，缩小了二者间的差距。     

EVALUATION OF BARLEY AND MALT QUALITY USING NEAR-INFRARED REFLECTANCE TECHNIQUES

A scanning near-infrared reflectance spectrophotometer was calibrated for the prediction of barley aleurone colour and malt moisture. The malt moisture was predicted on malt ground for the determination of malt extract (coarse grind) making the method suitable for moisture correction in malt extract estimation. Calibrations for the prediction of malt extract and endosperm modification from barley and malt were also attempted. A correlation (r= 0.851 n = 135) was found between malt hot water extract and the percentage of the endosperm estimated as being modified by microscopy following staining with Calcofluor. Probably because of this influence of modification on malt extract, the use of near-infrared reflectance to predict malt extract was most successful at predicting the malt extract values obtained following micro-malting in the absence of the additives, gibberellic acid and potassium bromate.     

基于自组织神经网络的实时统计特征抽取方法

应用人工神经网络讨论统计了特征抽取的原理，提出了相应的抽取方法。该方法具有实时性，容错性，高数据压缩率和良好的特征分辨率。通过计算机仿真和桥梁索力状态的实例计算分析证实了该技术具有广泛的应用价值。