粘土矿物对低渗透储层性质的影响——以鄂尔多斯盆地三叠系低渗透储层为例

粘土矿物是低渗砂岩储层的主要胶结物，对储层物性及开发过程中储层物性变化趋势有着重要的影响和控制作用。另外，粘土矿物也蕴含着大量沉积环境介质的物理化学信息，认识其自然规律，可以有效地指导预测有利储层，认识和改造油层。以鄂尔多斯盆地砂岩储层中的粘土矿物为研究对象，探讨分析粘土矿物对低渗储层性质的影响，该研究对含油气盆地低渗储层有效开发具有一定的参考价值。     

粘土作为高放废物处置回填材料的可行性研究

本文以西北粘土为对象,对其压实行为、热传导、膨胀特性,以及吸附和渗透性能进行了初步研究,借以探讨西北粘土在高放废物处置中用作回填材料的可行性。试验表明,以西北粘土为基材,经过适当的热改性和吸附改性,在初始含水量约为9%,于70MPa 下成型,用作高放废物处置中的回填材料是可行的。     

热解样品分析中重量的变化及其影响

热解除油是目前室内岩心分析中样品除油的主要方法之一，但由于热解温度较高，会对样品中粘土矿物的结构水和层间水产生较大的影响。本文结合粘土矿物的吸水特性，通过对大量的实验测定结果分析后认为：经过热解处理后的样品，在测定过程中受粘土矿物（主要是伊利石和蒙脱石）层间水变化的影响，会引起样品重量及样品孔隙空间体积的变化，从而对物性分析中孔隙度测定结果产生较大的影响。     

表外储油层酸化防膨剂的评价及效果分析

本文论述了采用不同防膨试验方法评价不同类型粘土防膨剂,并以回归曲线和价值工程分析防膨效果。由分子结构理论提出分子保护膜的防膨机理新观点,论述了酸液中添加具有多种功能的非离子型防膨剂QC—1可提高表外储层酸化与排酸效果。     

Melt intercalation/exfoliation of polystyrene-sodium-montmorillonite nanocomposites using sulfonated polystyrene ionomer compatibilizers

Quaternary ammonium salts of sulfonated polystyrene (SPS) were used as compatibilizers for melt intercalation of PS and pristine Na-montmorillonite. Tetra-octyl ammonium SPS and tetra-decyl ammonium SPS ionomeric compatibilizers produced significant exfoliation and a homogeneous dispersion of the polymer-clay nanocomposites. Wide angle X-ray diffraction and transmission electron microscopy were primarily used to characterize the morphology of the nanocomposites. Image analysis was used to measure the percentage exfoliation. Exfoliation increased with the increasing length of the alkyl chain of the ammonium counter-ion of the SPS ionomer. The nanocomposites containing ionomers exhibited higher storage moduli compared to nanocomposites without the compatibilizer.     

Quantitative X-ray powder diffraction analysis of clay minerals in Australian coals using Rietveld methods

The mineralogy of clay-rich mineral matter isolated from a range of Australian bituminous coals has been evaluated in quantitative terms from X-ray powder diffraction (XRD) patterns using a Rietveld-based data processing technique. The chemical composition of coal ash derived from this mineral matter has been calculated and compared to the directly determined composition of the ash prepared from the same coal samples. Although there are some minor differences due in part to uncertainty regarding the actual composition of several minerals, the compositions indicated by the two methods show a relatively high correlation, suggesting that the Rietveld technique provides mineralogical analyses that are consistent with independently determined chemical data. Comparison of the normalised clay mineral percentages from the Rietveld analysis to quantitative interpretations based on a peak intensities in glycolated and heat-treated oriented aggregates of the respective clay fractions also shows a high correlation, confirming mutual consistency of the two different mineralogical analysis methods. Such quantitative mineralogical data are significant to a range of coal exploration, mining and utilization activities, including seam correlation, material handling and ash and slag formation in combustion processes.     

熔制玻璃用坩埚抗热震性的改进

在粘土 -蜡石质玻璃用坩埚的配方基础上 ,研究了蜡石的粒径和加入量的变化对试样抗热震性的影响。结果发现 :减小蜡石的粒径与加入量均可提高试样的抗热震性 ,但减小蜡石粒径对提高试样的抗热震性更有效 ;在配料中引入少量的蓝晶石细粉 ,可明显提高试样的抗热震性。     

Effect of the use of mineral filler on the properties of concrete

Engineers of the concrete technology are increasingly concerned with the material passing through a sieve of the size under 0.149 mm. Materials called very fine aggregate or mineral filler may affect the performance of concrete in an either positive or a negative way. Discussions on aggregate containing very fine material are vitally important. Washing the aggregate residue has been the sole way to solve this matter to date. This is mainly based on the debatable opinion that materials of this kind are regarded as clay material. The goal of the study was to determine how the content of mineral filler might affect properties of concrete. Two types of aggregates with different amounts of cement and mineral filler were used. Basically, mineral filler replaced sand. The effect of applying different amounts of mineral filler on concrete was then determined. The addition of 7-10% of mineral filler to fine aggregate (0-2 mm) was found to considerably improve the properties of concrete.     

多矿物粘土基陶瓷地砖

以易熔粘土为基，并引入难熔粘土和熔剂成分，合成了地砖坯料。经研究确定，只要遵循一定的条件，是可以用上述原料生产出优质产品的。指出了制品结构和相组成的形成特点。     

Unique clay orientation in the injection-molded bar of isotactic polypropylene/clay nanocomposite

In this article, the injection-molded bars of isotactic polypropylene/organoclay nanocomposite with different clay contents have been obtained via dynamic packing injection molding (DPIM). The oriented microstructure including layered nanoparticles and PP lamellae has been inspected through 2D-WAXS analyses along the sample thickness of the molded bars. Depending on the clay content and sample thickness, various oriented clay structures with nanoparticles uniplanar-axially oriented parallel to the surface of molded bar, or partially tumbled around the flow axis of the molded bar, or even a random orientation, could be observed. The observed orientation behavior of nanoparticles could be temporarily elucidated as the results of the sensitive response of layered nanoparticles to shear deformation and the structural recovery of clay network assisted by the electrostatic attraction existing between adjacent nanoplatelets.