Panchromatic Chromophore Mixtures in an AlPO4‐5 Molecular Sieve: Spatial Separation Effects and Energy Transfer Cascades

Dye‐loaded AlPO₄‐5 single crystals were prepared by microwave‐assisted hydrothermal synthesis from a batch, containing a mixture of three chromophores (Coumarin 40, Rhodamine BE50, and Oxazine 1) differing in their absorption range, molecular dimensions, and solubilities. Confocal fluorescence images reveal a spatial separation effect of the dye molecules, where the slimmer, more‐soluble dye molecule (Coumarin 40) is uniformly distributed in the body of the single crystal, and the bulky and/or less‐soluble ones (Rhodamine BE50, Oxazine 1) are situated in distinct domains. Visible spectra show good panchromatic absorption of visible light. Fluorescence lifetime measurements indicate the presence of an energy transfer cascade of the entirely fixed dye molecules from Coumarin 40 to Oxazine 1. The transfer mechanism is predominantly radiative.     

Synthesis of 2,7‐Carbazolenevinylene‐Based Copolymers and Characterization of Their Photovoltaic Properties

New electroactive and photoactive conjugated copolymers consisting of alternating 2,7‐carbazole and oligothiophene moieties linked by vinylene groups have been developed. Different oligothiophene units have been introduced to study the relationship between the polymer structure and the electronic properties. The resulting copolymers are characterized by UV‐vis spectroscopy, size‐exclusion chromatography, and thermal and electrochemical analyses. Bulk heterojunction photovoltaic cells from different copolymers and a soluble fullerene derivative, [6,6]‐phenyl‐C₆₁ butyric acid methyl ester, have been fabricated, and promising preliminary results are obtained. For instance, non‐optimized devices using poly(N‐(4‐octyloxyphenyl)‐2,7‐carbazolenevinylene‐alt‐3″,4″‐dihexyl‐2,2′;5′,2″;5″,2″′;5″′,2″″‐quinquethiophenevinylene 1″,1″‐dioxide) as an absorbing and hole‐carrier semiconductor exhibit power conversion efficiency up to 0.8 % under air mass (AM) 1.5 illumination. These features make 2,7‐carbazolenevinylene‐based and related polymers attractive candidates for solar‐cell applications.     

相关双取样电路在降低CCD噪声中的应用

CCD器件已经广泛地应用于各个研究领域中 ,对其信号的具体处理方法是各种各样的。我们针对所研究的对象采取了一定的降低噪声的措施 ,取得了较好的结果 ,本文将对此进行阐述     

In-situ ESR spectroelectrochemical studies of overoxidation behaviour of poly(3,4-butylenedioxythiophene)

The behaviour of poly(3,4-butylenedioxythiophene) (PBuDOT), a relative of poly(3,4-ethylenedioxythipohnene) PEDOT within the poly(3,4-alkylenedioxythiophene) family, has been investigated at potentials above its electrochemical stability threshold using in situ ESR spectroelectrochemistry. The aim was to investigate the effect of electrochemical overoxidation on the charge carrying species, namely polarons, normally generated and annihilated during reversible redox doping and dedoping reactions, by determining the potential dependencies of spectroscopic parameters of the ESR spectra of the polymer over a selected potential range. Specific features of the trends of these dependencies allowed also for an evaluation of presence of the second type of charge carrying species—diamagnetic bipolarons and the effects of their interactions with polarons at different potentials. Around 1.5 V, where the boundary of electrochemical stability of the polymer lies, sharp drop of the concentration of paramagnetic centres has been observed together with a transitory narrowing of the ESR line. These changes were found to be irreversible as evidenced by the course of subsequent reduction half-cycle, which differed from the one for a not overoxidised polymer, observed in previous studies. Aided by the results of electrochemical studies it was concluded that the overoxidation process leads to a degradation of the polymer most probably due decrease of the conjugation length of the main chain π-bond through cross-linking or addition reactions. While the electrochemical results pointed to a non-complete degradation of the polymer, the specific parameters of the ESR line in the reduction half-cycle indicate that the remaining spins are confined to isolated segments of a partially degraded polymer where their behaviour resembles oligomer-like radicals.     

A novel open-loop high-speed CMOS sample-and-hold

A new open-loop high-speed CMOS sample-and-hold is presented. Based on new method for further reduction of voltage-dependent charge injection, a new CMOS sample-and-hold was designed. Simulation results confirm the effectiveness of this method. Over 10 dB improvement in signal-to-noise ratio, compared to the signal-to-noise ratio of conventional bottom plate sampling S/Hs was achieved with this method. A comparison between newly designed S/H and the bottom-plate sampling S/H is presented.     

Unconventional Charge Density Wave Arising from Electron–Phonon Interaction

We report of a theoretical study on quasi-one dimensional unconventional charge density wave (UCDW) driven by electron–phonon interaction. Within mean field theory, we find that the wavevector dependence of the coupling leads to a momentum dependent single particle gap on the Fermi surface. The presence of small energy single particle excitations around the gap nodes significantly changes the optical conductivity compared to the conventional CDW result. In addition to that, the collective phase excitation arising from fluctuation of the order parameter leads to further qualitative changes of the conductivity and results in an effective mass that is nonmonotonic in temperature.      

Charge transfer resistance of spray deposited and compressed counter electrodes for dye-sensitized nanoparticle solar cells on plastic substrates

Electrochemical impedance spectroscopy was used to determine the effective charge transfer resistances of porous dye-sensitized solar cell counter electrodes prepared by low-temperature spray deposition and compression of conductive carbon and platinized Sb-doped SnO₂ powders on indium tin oxide-coated plastic substrates. The charge transfer resistances were 0.5–2 and 8–13 Ω cm², respectively, when using 3-methoxypropionitrile as the electrolyte solvent. The manufacturing method used lends itself to produce mechanically stable and even-quality electrodes in an easy and fast manner.     

EFFECTS OF SUBMICROMETER PARTICULATE SILICA ADDENDA ON THE ADHESION OF MICROMETER-SIZE PARTICLES TO A POLYESTER-COMPOSITE SUBSTRATE

The force needed to detach five sets of different size particles, having number-averaged diameters between 3.6 and 8.5 µm, from a composite substrate was measured using an ultracentrifuge. In addition to size variations, the asperity concentration for each size particle was adjusted by varying the silica concentration, adjusted so that the surface area concentration at each level was kept constant for the five sizes of particles. Due to the changing silica concentration and particle size, the charge per particle also varied. It was found that the detachment force appeared to be virtually independent of charge, with any correlation actually appearing slightly negative, if anything. However, the detachment force increased monotonically with increasing particle diameter and decreased monotonically with increasing silica concentration. Moreover, upon normalizing the detachment force to the particle diameter and the silica concentration to the surface area concentration of silica, it was found that the detachment force clustered into groups in which the force needed to separate the particle from the substrate depended only on the silica concentration. These results suggest that van der Waals interaction, rather than electrostatic forces, are the dominant mechanism controlling toner adhesion in this instance.