两个基于2,5-二甲氧基对苯二甲酸和咪唑衍生物的超分子钴配位聚合物的结构及光催化反应

本文以咪唑衍生物为配体,通过水热合成法与钴离子制备出两个配位聚合物:{[Co(DTA)(1,4-DIB)(H₂O)]·H₂O}_n(1)和[Co(DTA)(1,3-BMIB)]_n(2)(1,4-DIB=1,4-二(1H-咪唑-1-基)苯; 1,3-BMIB=1,3-二(4-甲基-1H-咪唑-1-基)苯;H₂DTA=2,5-二甲氧基对苯二甲酸)。利用X射线单晶衍射、粉末衍射、热失重、元素分析、红外光谱以及固体紫外-可见光谱等对两个配合物进行了表征。结构分析证实配合物1和2是通过二维结构堆积成的三维超分子化合物。粉末衍射测试则显示两个配合物在水中有很好的稳定性。固体紫外-可见光谱显示两个配合物属半导体材料,对紫外-可见光有很强的吸收作用。在光催化实验中,配合物1和2可加快亚甲基蓝的降解速度。     

光码分多址系统中光学相关接收机判决阈值的分析

介绍了光码分多址系统中常用地址码（一维扩时码、二维码和三维码）的特点，并对它们各自的互相关均值和方差进行了理论分析。基于非相干光码分多址系统中光学相关接收机的基本原理，结合不同的用户地址码，对系统误码率性能进行了分析，得到了接收机最佳判决阈值与地址码基本特性参数和系统同时用户数间的关系。最后，给出了数值仿真结果。结果表明，对于采用特定地址码的光码分多址系统，只有选择合适的接收机判决阈值，系统的误码率性能才能达到最佳。研究结果对光码分多址系统中接收机判决阈值的选取具有一定的参考作用。     

激光相位成像雷达的研究

利用无合作目标漫反射激光相位测距的原理,对关键单元技术进行分析和设计,研制成一种用于自主式车辆视觉导引的激光相位成像雷达的原理样机.     

关于三维各向同性谐振子径向矩阵元计算的讨论

根据广义Laguerre多项式的数学性质，导出了较为简单的三维各向同性谐振子径向矩阵元的普遍公式,并在这基础上计算了一些重要特殊情形的径向矩阵元: 矢径r整数次幂的平均值，电偶极跃迁矩阵元和电四极跃迁矩阵元. 关键词： 三维各向同性谐振子 径向矩阵元 广义Laguerre多项式 偶极跃迁 四极跃迁     

Photoelastic stress freezing analysis of total shoulder replacement systems

Photoelastic stress freezing analyses in the orthopaedic literature have, in the past, been limited to studies where bone-on-bone, bone-on-metal or ultra-high molecular weight polyethylene (UHMWPE)-on-metal constructs are modeled. In these cases photoelastic plastics are used to simulate either bone or UHMWPE as it interacts with a metal implant. In joints such as the shoulder, a UHMWPE component is often cemented directly into the scapula's glenoid concavity using polymethylmethacrylate (PMMA). While a photoelastic material can be used to simulate bone with proper load scaling, UHMWPE and PMMA have very different mechanical properties at elevated stress freezing temperatures as compared within vivo body temperature. In this study, materials were identified such that proper scaling of elastic properties at elevated temperatures was utilized to simulate the metal-UHMWPE-PMMA-bone construct. Stresses on orthogonal planes throughout the glenoid were compared for two different UHMWPE component anchoring geometries (keeled and pegged). High stresses were found at the neck of the glenoid and also at the component-bone interface beneath simulated PMMA inclusions.     

Problem of the free oscillations of a capillary bridge

The free oscillations of a capillary bridge whose equilibrium shape is determined by the surface tension forces and the static gravity field are investigated. The values of 25 “lower” levels of the spectrum of natural oscillations of the capillary bridge are found for various control parameters in accordance with the experimental conditions.     

聚甲基丙烯酸甲酯掺杂Ce3+的飞秒激光三维信息存储

用飞秒激光(200 fs,1 kHz,800 nm)脉冲在掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯(PMMA)膜中进行了光存储实验研究,包括对样品的吸收光谱、激光照射前后的电子旋转共振(Electron spin resonance,ESR)光谱的测量和讨论。结果表明掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯膜具有较低的写入阈值,有利于高速、并行的三维光存储。实验结果采用传统光学显微镜并行读出。给出了四层存储结果(点间距和层间距分别是4μm和16μm),并讨论了脉冲能量的大小对空腔尺寸的影响,进行高密度存储时,在保证读出信号灰度值足够大的情况下,应选择尽量小的激光脉冲写入能量。实验结果表明这种材料可以应用于三维光信息存储。     

Branched polymers in a wedge geometry in three dimensions

We investigate the statistical and dimensional properties of uniform star polymers attached by the branching vertex of degreef in a wedge geometry in three dimensions and described by the wedge angles and. We show that the growth constant is equal to ^f , where is the self-avoiding walk limit. Thef and (, ) dependences of the corresponding critical exponent _f (, ) are studied using Monte Carlo techniques. In the casef=1, our results are compared with existing predictions obtained from series expansion and renormalization group methods. We have also estimated the amplitudes for the mean square radius of gyration and the mean square end-to-end branch length. Our results for the ratio of the mean square radius of gyration of anf-star to that of a linear polymer of the same degree of polymerization attached in a similar wedge, and the analogous ratio for the mean square end-to-end branch length, are consistent with these ratios being lattice-independent quantities.     

Crystal Structure of Organometallic Complex [Zn（pom）2I2]

ＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅｏｆＯｒｇａｎｏｍｅｔａｌｌｉｃＣｏｍｐｌｅｘＺｎ（ｐｏｍ）_２Ｉ_２］ＤｏｎｇＭｅｉ－Ｂｉｎ；ＬｉＳｏｎｇ－Ｘｉａｎ；ＺｈａｎｇＨａｎ－Ｈｕｉ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙ，ＦｕｚｈｏｕＵｎｉｖｅｒｓｄｙ...     

三维聚合物双(三丁基锡)戊二酸酯的合成及晶体结构研究

用三丁基氯化锡与戊二羧酸二钠以2:1摩尔比反应,合成了双（三丁基锡）戊二羧酸酯,并用元素分析、红外光谱、核磁共振氢谱及X-射线单晶衍射进行了表征和结构测定。X-射线单晶衍射法测定表明,化合物属单斜晶系,空间群为Cc,晶胞参数:a=13.984（3）,b=16.164（3）,c=16.894（3）A,β=107.457（3）°,V=3642.9（11）A3,Z=4,C29H60O4Sn2,Dc=1.251g/cm3,μ=1.394 mm-1,R=0.0500,wR=0.0874,F（000）=1416。晶体结构中存在2种化学环境不同的三角双锥构型的锡原子,由于配体中2个羧基在不同方向的交联作用,使化合物呈现三维立体骨架结构,并且在骨架结构中存在沿a、b、c轴3个方向伸展的规则的大环直孔道。