80.5 MeV/u碳离子诱发铜靶的放射性剩余产物测量

高能重带电粒子能直接穿透靶原子核外电子层,与原子核发生直接碰撞,发生散裂反应,产生一系列具有放射性的剩余产物核.重带电粒子诱发靶材放射性剩余核与辐射防护和人员安全有着密切联系,当前,大部分剩余核产额主要依靠蒙特卡罗粒子输运程序进行模拟计算,其准确程度亟需通过实验测量进行准确评估.本文利用能量为80.5 MeV/u的(12)^C⁶⁺粒子对薄铜靶开展了辐照实验与伽玛射线测量,结合伽玛谱学分析方法,得出了辐照产生的18种放射性剩余产物的初始活度和产生截面值,并与PHITS模拟结果进行对比.结果表明,PHITS模拟程序对放射性剩余核种类的估计具有较高可靠性,在其绝对产额方面,与实验测量仍具有较大偏差.     

Monte Carlo simulation of electric conductivity for pure and doping fullerene (C60)

In this paper, we have used Monte Carlo (MC) method to simulate and study the temperature and doping effects on the electric conductivity of fullerene (C60). The results show that the band gap has reduced by the doping and the charge carrier transport is facilitated from valence band to conduction band by the temperature where is touched a 300 K. In this case, the conductivity reached a value of $4\times {10}^{-7}\text{S}{\text{cm}}^{-1}$. The electric conductivity of C60 can increase by the triphenylmethane dye crystal violet (CV) alkali metal to reach $4\times {10}^{-3}\text{S}{\text{cm}}^{-1}$ at 303 K. Our results of MC simulation have a good agreement with those extracted from literature [10], [33].     

Monte Carlo study of interfacial silicon suboxide layers and oxidation kinetics

A simple simulation scheme that simultaneously describes the growth kinetics of SiO₂ films at the nanometer scale and the SiO_x/Si interface dynamics (its extent, and spatial/temporal evolution) is presented. The simulation successfully applies to experimental data in the region above and below 10 nm, reproduces the Deal and Grove linear-parabolic law and the oxide growth rate enhancement in the very thin film regime (the so-called anomalous region). According to the simulation, the oxidation is governed mainly by two processes: (a) the formation of a transition suboxide layer and (b) its subsequent drift towards the silicon bulk. We found that it is the superposition of these two processes that produces the crossover from the anomalous oxidation region behavior to the linear-parabolic law.     

Non-universal critical behaviour of heteronuclear dimers on a square lattice––A Monte Carlo study

Monte Carlo simulation within the grand canonical ensemble, the histogram reweighting technique, and finite size scaling analysis are used to explore the phase behaviour of heteronuclear dimers, composed of A and B type atoms, on a square lattice. We have found that for the models with attractive BB and AB nearest-neighbour energy, u_BB=u_AB=−1, and for non-repulsive energy between AA nearest-neighbour sites, u_AA<0, the system belongs to the universality class of the two-dimensional Ising model. However, when u_AA>0, the system exhibits a non-universal critical behaviour. We have evaluated the dependences of the critical point characteristics on the value of u_AA.     

电子回旋共振放电的电离特性PIC/MCC模拟(Ⅰ)——物理模型与理论方法

采用粒子模拟与蒙特卡罗相结合(PIC/MCC)的方法对电子回旋共振(ECR)放电中的电离过程进行了模拟，其中带电粒子与微波的相互作用由PIC方法的电磁模型描述，粒子间的碰撞过程由MCC方法描述.考虑的碰撞类型有电子与中性粒子的弹性、激发、电离碰撞，离子与中性粒子的弹性、电荷交换碰撞，碰撞截面均依赖于能量而变化.阐述了理论分析的过程，为数值模拟ECR放电奠定了基础. 关键词： 电子回旋共振放电 粒子模拟 蒙特卡罗 电离     

Approximation of photonuclear interaction cross-sections

Photonuclear interaction cross-sections from the GEANT4 database are approximated for all nuclei and all energies (from the hadron production threshold to about 40 TeV). The approximation methods in the giant-dipole resonance region, nucleon resonance region, and high-energy region are improved with respect to existing approximations. As an application of the approximation for photonuclear cross-sections, an improved method of calculating electronuclear cross-sections is developed. The interaction cross-section of virtual photons with nuclei at high Q² are approximated and a simple algorithm for describing the electronuclear reactions, including high-Q² scattering, is proposed. Received: 22 February 2002 / Accepted: 6 May 2002     

Construction algorithms for polynomial lattice rules for multivariate integration

We introduce a new construction algorithm for digital nets for integration in certain weighted tensor product Hilbert spaces. The first weighted Hilbert space we consider is based on Walsh functions. Dick and Pillichshammer calculated the worst-case error for integration using digital nets for this space. Here we extend this result to a special construction method for digital nets based on polynomials over finite fields. This result allows us to find polynomials which yield a small worst-case error by computer search. We prove an upper bound on the worst-case error for digital nets obtained by such a search algorithm which shows that the convergence rate is best possible and that strong tractability holds under some condition on the weights.

We extend the results for the weighted Hilbert space based on Walsh functions to weighted Sobolev spaces. In this case we use randomly digitally shifted digital nets. The construction principle is the same as before, only the worst-case error is slightly different. Again digital nets obtained from our search algorithm yield a worst-case error achieving the optimal rate of convergence and as before strong tractability holds under some condition on the weights. These results show that such a construction of digital nets yields the until now best known results of this kind and that our construction methods are comparable to the construction methods known for lattice rules.

We conclude the article with numerical results comparing the expected worst-case error for randomly digitally shifted digital nets with those for randomly shifted lattice rules.

     

Tomographic reconstruction using heuristic Monte Carlo methods

A tomographic reconstruction method based on Monte Carlo random searching guided by the information contained in the projections of radiographed objects is presented. In order to solve the optimization problem, a multiscale algorithm is proposed to reduce computation. The reconstruction is performed in a coarse-to-fine multigrid scale that initializes each resolution level with the reconstruction of the previous coarser level, which substantially improves the performance. The method was applied to a real case reconstructing the internal structure of a small metallic object with internal components, showing excellent results.     

激光诱导间质肿瘤热疗的数值模拟和实验研究

本文在考虑生物组织物性动态变化的情况下建立了激光诱导间质肿瘤热疗(LITT)的物理数学模型,采用MonteCarlo方法数值模拟了LITT中激光能量在生物组织内的传输过程,基于Pennes生物传热方程和Arrhenius方程数值求解了组织内的温度分布和热损伤体积的变化,分析了热物性及血液灌注率的动态变化对LITT过程的影响,并与相应的离体实验结果进行了对比。数值模拟结果表明,组织的热物性及血液灌注率的动态变化对于热损伤体积的变化具有重要的影响。因此在激光诱导间质肿瘤热疗的数值模拟中应该考虑热物性及血液灌注率的动态变化以期为临床治疗方案的制定提供更为准确的依据。     

Methods for implementing the stream boundary condition in DSMC computations

In the direct simulation Monte‐Carlo (DSMC) method for simulating rarefied gas flows, the velocities of simulator particles that cross a simulation boundary and enter the simulation space are typically generated using the acceptance–rejection procedure that samples the velocities from a truncated theoretical velocity distribution that excludes low and high velocities. This paper analyses an alternative technique, where the velocities of entering particles are obtained by extending the simulation procedures to a region adjacent to the simulation space, and considering the movement of particles generated within that region during the simulation time step. The alternative method may be considered as a form of acceptance–rejection procedure, and permits the generation of all possible velocities, although the population of high velocities is depleted with respect to the theoretical distribution. Nevertheless, this is an improvement over the standard acceptance–rejection method. Previous implementations of the alternative method gave a number flux lower than the theoretical number required. Two methods for obtaining the correct number flux are presented. For upstream boundaries in high‐speed flows, the alternative method is more computationally efficient than the acceptance–rejection method. However, for downstream boundaries, the alternative method is extremely inefficient. The alternative method, with the correct theoretical number flux, should therefore be used in DSMC computations in favour of the acceptance–rejection method for upstream boundaries in high‐speed flows. Copyright © 2003 John Wiley & Sons, Ltd.