Contemporary bone loss options: Rebuild,reinforce, and augment

Bone loss is commonly encountered during revision total knee arthroplasty (TKA). Small defects can be adequately managed with cement filling (with or without screws), modular prosthetic augments, and morselized allograft. For larger defects, cancellous impaction grafting and structural allografts have traditionally been utilized. More recently, highly porous tantalum cones and titanium sleeves have been designed to achieve axial and rotational stability in the metaphysis and subsequent biologic fixation. Sleeves are linked to one type of prosthesis, whereas cones are unlinked and can be used with any implant design. Multiple studies have demonstrated excellent survivorship and radiographic osseointegration at mid-term follow-up. This article provides a review of contemporary methods of bone loss management with a focus on highly porous metals and an emphasis on the authors’ preferred method for managing the severe bone loss in revision TKA.     

Polyethylene in knee arthroplasty: A review

Polyethylene (PE) has been used extensively in knee arthroplasty since the mid 20th century. Progress in material manufacturing and processing has led to newer polyethylenes over last few decades with different material properties. It has been established that PE wear in knee arthroplasty causes particle induced osteolysis which is the main reason for late failure and requires revision surgery. Although there are various causes of wear, the properties of PE have long been a matter of investigation as a contributory factor. The advent of newer highly cross linked PE has been shown to improve wear rates in hip arthroplasty but the benefits have not been shown to be of the same degree in knee arthroplasty. The laboratory and clinical studies so far are limited and slightly conflicting in their conclusions. The risks of using highly cross linked PE in knee arthroplasty include tibial post fracture, disruption of locking mechanism, liner fracture which can lead to increased wear and osteolysis. The current evidence suggests that highly cross linked polyethylenes should be used with caution and only considered in younger active patients. The results of a recently completed randomized trial to compare the conventional with high molecular weight PE in knee arthroplasty are awaited.     

Longer Operative Time Results in a Higher Rate of Subsequent Periprosthetic Joint Infection in Patients Undergoing Primary Joint Arthroplasty

Background

Whether prolonged operative time is an independent risk factor for subsequent surgical site infection (SSI) and periprosthetic joint infection (PJI) following total joint arthroplasty (TJA) remains a clinically significant and underexplored issue. The aim of this study is to investigate the association between operative time and the risk of subsequent SSI and PJI in patients undergoing primary TJA.

Adductor Canal Block or Local Infiltrate Analgesia for Pain Control After Total Knee Arthroplasty? A Systematic Review and Meta-Analysis of Randomized Controlled Trials

Background

Total knee arthroplasty is a treatment option for debilitating arthritis. In the postoperative period, patients experience moderate to severe pain affecting the rehabilitation, hospital stay, and patient satisfaction. This study aims at utilizing current best evidence to determine whether adductor canal block (ACB) or periarticular injection (PAI) is a better modality for managing short-term postoperative pain and opioid consumption.

An Evidence-Based Review of Total Body Irradiation

The purpose of this literature review is to investigate clinical treatment methods of total body irradiation within the context of a clinical department adopting a paediatric cohort with no existing technique. An extensive review of the literature was conducted using PubMed, Science Direct, Google Scholar, and Clinicians Knowledge Network. Articles were limited to nonhelical tomotherapy, nonparticle therapies, and those using hyperfractionated regimes. Total marrow irradiation was excluded because of national treatment and trial limitations. Of the numerous patient positioning methods present within the literature, the most comfortable and reproducible positioning methods for total body irradiation include both supine and the supine and/or prone combination. These positions increased stability and patient comfort during treatment, while also facilitating computed tomography data acquisition at the simulation stage. Ideally, dose calculations should be performed using a three-dimensional treatment planning system and quality assurance procedures that include in vivo dosimetry measurements. The available literature also suggests inhomogeneity correction factors and intensity modulation are superior to conventional open field techniques and should be implemented within developing protocols. Dynamic machine dose modulation is suggested to reduce department impact, removing the need for tissue compensators and accessory shielding devices, while providing significant improvements to treatment time and dose accuracy. Further long-term survival and intensity modulation studies are warranted, including direct comparisons of both dose modulation and treatment efficiency.     

完全型雄激素不敏感综合征2例临床特点及处理

雄激素不敏感综合征(androgen insensitivity syndrome,AIS)又称为睾丸女性化综合征(testicular feminization syndrome,TFS),是一种X连锁遗传病,是男性假两性畸形中较常见的类型,可分为完全型AIS和不完全型AIS,其原因主要是雄激素受体(androgen receptor,AR)基因的突变导致其对雄激素产生抵抗和不应答。本文回顾南京医科大学附属妇产医院2例CAIS患者的临床资料及诊疗过程,以期能进一步提高对该病的认知及诊治水平。     

Effect of Day Optimizing Throughput (Dot) Knee Software Implementation on Magnetic Resonance Imaging Workflow Efficiency

PurposeAttempts by magnetic resonance (MR) manufacturers to help imaging centres improve patient throughput has led to the development of more automated acquisition. This software is capable of customizing individual scan alignment; potentially improving imaging efficiency and standardizing protocols. However, substantial investments are required to introduce such systems, potentially deterring their widespread application. This study assessed the implementation costs and reduction in examination durations for automated knee MR imaging (MRI) software.Materials and MethodsResearch activities were performed at a community-based academic centre on a 3-Tesla (3-T) system using Siemens' Day Optimizing Throughput (Dot) knee software. Examination acquisition times were extracted from the system before and after software implementation. Fiscal year 2012/13 finances were used to determine the average hourly cost of MRI utilization. Costs associated with automated software implementation were also calculated. Finally, the number of knee scans required to achieve a positive return on investment using the software was established.Results and DiscussionThe mean (standard deviation, sample size) pre- and post-Dot software scan times were 23.20 (4.18, n = 266) and 21.94 (4.51, n = 59) minutes, respectively, for a routine knee scan and 11.88 (1.60, n = 74) and 11.24 (1.51, n = 27) minutes, respectively, for a fast knee scan. The overall weighted average resulted in a 64-second time savings per automated knee examination. This negligible time savings would be extremely difficult to make use of clinically. Dot simplified 29 unique knee protocols to two, improving the consistency of knee examinations. Current Dot software is not compatible with all patients and therefore has limitations that are a concern among MR technologists.ConclusionAdoption of automated knee systems could assist in standardizing protocols; however, the cost of implementation and difficulty in modifying patient scheduling to reflect the minimal time savings would make a financial return unlikely to occur at small- and medium-sized institutions.